Lexmark T620 User manual

Category
Print & Scan
Type
User manual

This manual is also suitable for

Removing an output option
Paper handling
Maintenance
Troubleshooting
Administration
Index
1
Printing
www.lexmark.com
Lexmark T620 and T622
Follow these instructions to remove a finisher, 5-bin mailbox, high-capacity output stacker, or
output expander. The following steps explain how to remove an output expander as an
example.
1 If you are removing the topmost output option and do not plan to return it to that
position, remove the top cover.
If you are removing a finisher, skip to step 4.
You must attach the top cover to the printer or topmost output option when you finish
removing output options. In addition, it may be necessary to remove the paper bail
from the top cover, depending on the type of output option to which it is attached.
Refer to the Setup Guide for more information.
Removing an output option
Paper handling
Maintenance
Troubleshooting
Administration
Index
2
Printing
www.lexmark.com
Lexmark T620 and T622
2 Detach the output expander tray.
If you are removing a 5-bin mailbox or high-capacity output stacker, skip to step 3.
a Lift the edge of the tray so the lower tabs come out of the slots on the output
expander.
Removing an output option
Paper handling
Maintenance
Troubleshooting
Administration
Index
3
Printing
www.lexmark.com
Lexmark T620 and T622
b Pull the tray straight out toward you to remove the upper tabs from the output
expander slots.
Removing an output option
Paper handling
Maintenance
Troubleshooting
Administration
Index
4
Printing
www.lexmark.com
Lexmark T620 and T622
3 The output option may have a wire paper bail attached. If so, remove the tips of the
paper bail from the ends of the plastic bracket on the bottom of the output option.
Refer to the Setup Guide when you are ready to reattach the paper bail to an output
option.
Removing an output option
Paper handling
Maintenance
Troubleshooting
Administration
Index
5
Printing
www.lexmark.com
Lexmark T620 and T622
4 Carefully lift the option straight up until it is completely disconnected from the option
below it or from the printer. Set it aside.
Warning: The edges of the mounting brackets could damage tabletops or fabrics.
5 Refer to the Setup Guide when you are ready to reattach options.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Lexmark T620 User manual

Category
Print & Scan
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI