INSTALLATION GUIDE
ENGLISH
Code: EWMK608035
Name: Metallic enclosure KEY 600x800x350 IP55
IM EWMK608035
Edition: 2 from 14.05.2014
Supersedes: 1 from 05.03.2013
1. Intended use:
The EWMK608035 enclosure is intended for mounting electrical power equipment in electrotechnical branches
that require IP55 protection grade (protection grade IP55: ‘5’ – protection against dust, ‘5’ – protection against water jets).
A mounting plate is included to the enclosure.
2. Specifications:
SPECIFICATIONS
Mounting plate dimension.
Materials.
- colour: RAL 7035(grey, structural)
- mounting plate: galvanized sheet S2,0mm
- high-quality polyurethane gasket
Additional accessories.
- to keep tightness, buy the following isolation cable glands:
ML146 (M12x1.25), ML147 (M16X1.5), ML145 (M20x1.5)
The enclosure in its standard version does not include an earthing wire or
cable glands
Notes.
- mounted with wall holders (included)
The enclosure does not feature embossing for cable glands
3. Dimensions: