Sony LBT-XGV10AV Operating instructions

Brand: Sony

Model: LBT-XGV10AV

Category: CD players

Type: Operating instructions

Compact Hi-Fi

Stereo System

Operating Instructions

4-244-599-11 (1)

LBT-XGV10AV

You can

Enjoy video playback (moving

pictures) as well as audio CDs.

Play interactive software using

menu screens displayed on the

TV screen (menu playback), in

addition to the video playback

function of VIDEO CDs

without PBC functions.

Moreover, you can play high

or standard quality still picture.

WARNING

To prevent fire or shock hazard, do not

expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

Do not install the appliance in a confined space,

such as a bookcase or built-in cabinet.

To prevent fire, do not Cover the ventilation of the

apparatus with newspapers, table-cloths, curtains, etc.

And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects

filled with liquids, such as vases, on the apparatus.

The following caution label is located inside the

apparatus.

Don’t throw away the battery with

general house waste, dispose of it

correctly as chemical waste.

This appliance is classified as

a CLASS 1 LASER product.

This label is located on the

rear exterior.

This system can play the

following discs

VIDEO CDs Audio CDs

Disc logo

Contents Audio + Video Audio

(moving pictures)

Disc size 12 cm/8 cm 12 cm/8 cm

Play time 74 min./20 min. 74 min./20 min.

Notes on VIDEO CDs

• This system conforms to VIDEO CDs without PBC

functions (Ver. 1.1) and VIDEO CDs with PBC

functions (Ver. 2.0) of VIDEO CD standards. You

can enjoy two kinds of playback according to the

disc type.

Disc type

VIDEO CDs without

PBC functions

(Ver. 1.1 discs)

VIDEO CDs with

PBC functions

(Ver. 2.0 discs)

PBC = Play Back Control

• VIDEO CDs with CD audio tracks may not play

properly.

Notes on CD-R and CD-RW discs

This unit can play the following discs:

Type of discs Label on the disc

Audio CDs

MP3 files

• Discs recorded on CD-R/CD-RW drives may not be

played back because of scratches, dirt, recording

condition or the drive’s characteristics.

• You cannot also play a CD-R/CD-RW that is not

finalized*.

• Playback of multi-session CD-R/CD-RWs is not

supported.

*A process is necessary for a recorded CD-R/CD-

RW disc to be played on the audio CD player.

This stereo system is equipped with the Dolby Pro

Logic Surround decoder.*

* Manufactured under license from Dolby

Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are

trademarks of Dolby laboratories. Confidential

ENERGY STAR

is a U.S.

registered mark.

As ENERGY STAR

Partner, Sony

Corporation has determined that this

product meets the ENERGY STAR

guidelines for energy efficiency.

Table of Contents

List of Button Locations and

Reference Pages

Main unit........................................................ 4

Remote control...............................................5

Getting Started

Hooking up the system .................................. 6

Inserting two size AA (R6) batteries into the

remote .....................................................8

Setting up the speakers for Dolby Pro

Logic ....................................................... 9

Setting the clock ..........................................10

VIDEO CD/CD/MP3 files

Loading a disc .............................................. 11

Playing a VIDEO CD

–– Normal Play/Shuffle Play/

Repeat Play ........................................... 11

Playing a VIDEO CD with the PBC functions

(Ver. 2.0)

–– PBC Play................................................. 13

Playing a CD

–– Normal Play/Shuffle Play/

Repeat Play ........................................... 14

Programming the VIDEO CD/CD tracks

–– Program Play ..........................................15

Playing a disc with MP3 files

–– Normal Play/Shuffle Play/

Repeat Play ........................................... 16

Locating a specific part on a VIDEO CD

–– Time Search/Disc Digest ........................ 18

Resuming playback from the point you

stopped a VIDEO CD

–– Resume Play ........................................... 19

Tuner

Presetting radio stations ............................... 20

Listening to the radio ................................... 21

Tape

Loading a tape..............................................22

Playing a tape............................................... 22

Recording to a tape

–– CD Synchro Recording/High Speed

Dubbing/Recording Manually/

Program Edit ......................................... 23

Timer-recording radio programs..................24

Sound Adjustment

Adjusting the sound ..................................... 25

Selecting the audio emphasis effect............. 26

Selecting the surround effect ....................... 26

Making a personal audio emphasis file

–– Personal File ........................................... 27

Enjoying Dolby Pro Logic Surround

sound..................................................... 27

Timer

Falling asleep to music

— Sleep Timer............................................. 28

Waking up to music

— Daily Timer............................................. 28

Other Features

Changing the spectrum analyzer display ..... 29

Singing along: Karaoke ............................... 29

Enhancing video game sound

–– Game Sync .............................................. 31

Mixing video game sound with other sound

source

— Game Mixing .......................................... 31

Display

Turning off the display

— Power Saving Mode................................ 32

Using the display ......................................... 32

Adjusting the VCD picture

— Picture Effect .......................................... 33

Using the on-screen display ......................... 33

Optional Components

Hooking up optional components ................35

Listening to audio from a connected

component ............................................ 37

Recording audio from a connected

component ............................................ 38

Recording on a connected component .........38

Troubleshooting

Problems and remedies ................................ 38

Messages ...................................................... 41

Additional Information

Precautions................................................... 42

Specifications............................................... 43

Glossary ....................................................... 45

ALPHABETICAL ORDER

E – K

ECHO LEVEL ej (30)

EDIT ef (8, 24)

EFFECT 5 (26, 27)

ENTER 5 (10, 24, 25, 27–29, 33)

FM MODE 8 (21)

FUNCTION qd (8, 11, 14, 15, 17,

23, 30, 31, 37)

GAME qf (31, 37)

GAME INPUT AUDIO L/R jacks

wf (36)

GAME INPUT VIDEO jack wf

(36)

GAME MIXING qg (31)

GROOVE ra (25)

H SPEED DUB ql (23)

KARAOKE PON/MPX ea (29)

KEY CONTROL #/2 ea (30)

M – R

MIC LEVEL ej (29, 30)

MIC 1/2 jacks eh (29)

NEXT wd (13, 19)

P FILE 5 (26, 27)

PHONES jack w;

PICTURE EFFECT wd (33)

PLAY MODE eg (11, 14, 15, 17)

POWER SAVE/DEMO

(STANDBY) 3 (32)

Power stream indicator 6

PREV wd (13, 19)

PRO LOGIC wg (9, 27)

PUSH OPEN wk (11, 12, 15, 17)

REPEAT eg (12, 15, 17)

RETURN O wd (13)

List of Button Locations and Reference Pages

How to use this page

Use this page to find the location of buttons and other

parts of the system that are mentioned in the text.

Illustration number

PLAY MODE eg (11, 14, 15, 17)

Name of button/part Reference page

Main unit

wfwgwhwjwle;eaesed

2345 76 890 qa qs

A – D

A EJECTZ/Z B EJECT wl (22)

ALBUM +/– ed (17)

CD SYNC ql (23, 24)

Direct equalizer qh r; (26)

POP/ROCK/JAZZ/DANCE/

GAME

SALSA/REGGAE/TANGO/

SAMBA/MOVIE

DIRECTION ek (22–24, 30)

DISC SKIP eg (12, 14, 15, 17)

DISC 1 to 5 es (12, 14, 17)

DISPLAY 2 (32)

DSP ra (26)

DVD 5.1CH wg (37)

List of Button Locations and Reference Pages

Remote control

ALPHABETICAL ORDER

S – X

SELECT wd (13, 18)

SLEEP 0 (28)

SPECTRUM ANALYZER 4 (29)

SUPER WOOFER ra (25)

SUPER WOOFER MODE ra (25)

TIMER SELECT qa (25, 29)

TUNER/BAND 9 (20, 21)

TUNER ENTER wh (20, 41)

TUNER MEMORY wh (20)

TUNING MODE 8 (20, 21)

TUNING –/+ 9 (20, 21)

VOLUME control 7

X-GROOVE wj (25)

BUTTON DESCRIPTIONS

@/1 1

c/CLOCK SET qs

h/H qj el

x qj el

.m /M> qj el

X qk

z REC qk

.AMS> wa

HX ws

x ws

m /M ws

R/r/T/t (cursor) e;

A–R

ALBUM +/– eg (17)

CD N wl (11, 12, 14, 19)

CENTER LEVEL +/– w; (10)

CLEAR 6 (15, 18)

CLOCK/TIMER SELECT r; (25,

29)

CLOCK/TIMER SET 1 (10, 24,

28)

DISC SKIP ef (12, 14, 15, 17)

DISPLAY eh (32)

DSP wh (26)

DVD 5.1CH wg (37)

EFFECT q; (26, 27)

ENTER ws (10, 24, 25, 27–29, 33)

FILE SELECT +/– qf (26)

FUNCTION +/– ea (8, 11, 14, 15,

17, 23, 30, 31, 37)

KEY CONTROL #/2 ql (30)

NEXT wj (13, 19)

Numeric buttons ej (12, 13, 18, 19)

ON SCREEN ek (33)

PICTURE EFFECT 9 (33)

PLAY MODE ed (11, 14, 15, 17)

PRESET –/+ wj (21)

PREV wj (13, 19)

PRO LOGIC wf (9, 27)

REAR LEVEL +/– qh (10)

REPEAT es (12, 15, 17)

RETURN O qa (13)

S–V

SELECT wl (13, 18)

SLEEP el (28)

SPECIAL MENU 8 (18, 19)

TAPE A nN e; (22)

TAPE B nN qg (22)

TEST TONE wd (9)

TUNER/BAND wk (20, 21)

TUNING –/+ qj (20, 21)

TV CH +/– 5 (8)

TV/VIDEO 7 (8)

TV VOL +/– 4 (8)

TV @/1 2 (8)

VOL +/– qk

BUTTON DESCRIPTIONS

@/1 3

X qs

x qd

m /M qj

R/r/T/t (cursor) wa

./> wj

Getting Started

Hooking up the system

Do the following procedure 1 to 5 to hook up your system using the supplied cords and

accessories.

1 Connect the speakers.

1 Connecting the front speakers

Connect the speaker cords to the FRONT

SPEAKER jacks as below.

2 Connecting the center speaker

Connect the speaker cords to the

SURROUND SPEAKER CENTER jack as

below.

CENTER

REAR

Black/Stripe (#)

Red/Solid (3)

Insert only the stripped portion.

Black/Stripe (#)

Red/Solid (3)

AM loop antenna

FM antenna

Right front speaker Left front

speaker

Center speaker

Left rear

speaker

Right rear

speaker

Getting Started

4 Connect the power cord to a wall outlet.

The demonstration appears in the display.

When you press ?/1, the system turns on

and the demonstration automatically ends.

If the supplied adaptor on the plug does not

fit your wall outlet, detach it from the plug

(only for models equipped with the

adaptor).

5 Set the color system according to your

TV while the power is off.

* When your TV automatically changes the color

system according to the input signal.

Notes

• When you play a VIDEO CD recorded in the

different color system from the one you set to the

unit, the picture image may be distorted.

• You cannot set the color system in the Power

Saving Mode.

The color system

of your TV

NTSC

PAL

AUTO*

Do this

While holding down

DANCE, press ?/1.

While holding down

ROCK, press ?/1.

While holding down JAZZ,

press ?/1.

continued

CENTER

REAR

Black/Stripe (#) Red/Solid (3)

3 Connecting the rear speakers

Connect the speaker cords to the

SURROUND SPEAKER REAR jacks as

below.

Note

Keep the speaker cords away from the antennas to

prevent noise.

2 Connect the FM/AM antennas.

Set up the AM loop antenna, then connect

it.

Note

Keep the speaker cords away from the antennas to

prevent noise.

3 Connect the video input jack of your TV

to the VIDEO OUT jack with the

supplied video cable.

VIDEO OUT

When using a TV

Turn on the TV and select the video input so you

can view the pictures from this system.

Jack type B

COAXIAL

FM 75

AM loop antenna

Extend the FM

lead antenna

horizontally.

Jack type A

FM 75

AM loop antenna

Extend the FM

lead antenna

horizontally.

Inserting two size AA (R6)

batteries into the remote

Tip

When the remote no longer operates the system,

replace both batteries with new ones.

Note

If you do not use the remote for a long period of time,

remove the batteries to avoid possible damage from

battery leakage.

Using the remote

You can control Sony TVs using the buttons

below.

By pressing

TV ?/1

TV/VIDEO

TV VOL +/–

TV CH +/–

Note

Depending on the TV, you may not be able to control

your TV or to use some of the buttons above.

You can

Turn on or off the TV

Select the input source for the TV

Adjust the volume of the TV

Change the channel of the TV

TV ?/1

TV CH +/–

TV VOL +/–

TV/VIDEO

When carrying this system

Do the following to protect the CD

mechanism.

1 Make sure that all discs are removed

from the unit.

2 Press FUNCTION (or FUNCTION +/– on

the remote) repeatedly until “CD”

appears.

3 Hold down EDIT and then press ?/1 until

“LOCK” appears.

4 Unplug the AC power cord.

Before connecting the Center

speaker

Stick the supplied speaker pads to the bottom

of the center speaker to stabilize the speaker

and prevent it from slipping.

Hooking up the system (continued)

Center speaker

Getting Started

Setting up the speakers

for Dolby Pro Logic

Dolby Pro Logic Surround improves the sound

image by using four separate channels. These

channels manipulate the sound to enhance the

action as it happens on the screen.

Since the center speaker cannot produce

enough bass, the bass sound of the center

channel is output from the front speakers.

Positioning the center and

rear speakers

1 Place the front speakers at an angle of

45 degrees from your listening

position.

2 Place the center speaker so it is placed

at about the same height as the front

speakers. Align the center speaker with

the front speakers or place it a little

behind the front speakers’ position.

3 Place the rear speakers facing each

other at about 60 to 90 cm above your

listening position.

Adjusting the speaker volume

of each speaker (Test Tone)

To enjoy Dolby Pro Logic Surround sound,

adjust the volume of each speaker using the test

tone that the system provides.

1 Press PRO LOGIC when the power is

on.

The button lights up.

2 Press TEST TONE on the remote.

The test tone is heard from the speakers in

the following order.

LEFT (front left) t CENTER (center) t

RIGHT (front right) t

REAR (rear) t .....

Front speaker

(L)

Front speaker

(R)

Rear

speaker

(R)

Rear

speaker

(L)

Center speaker

Rear speaker

60 to 90 cm

Front

speaker

(L)

Front

speaker

(R)

Rear

speaker

(L)

Rear

speaker

(R)

Center speaker

continued

3 From your listening position, adjust the

volume until the volume level of the

test tone from each speaker sounds the

same.

To adjust

the volume of the

center speaker

the volume of the rear

speakers

4 From your listening position, adjust the

balance.

To adjust

the balance between

the front left and

front right speakers

the balance between

the rear left and rear

right speakers

5 Press TEST TONE when you are done

adjusting.

The test tone is turned off.

Tip

If you turn VOLUME (or press VOL+ or – on the

remote) all the speaker volume changes.

Note

The test tone feature works only for Dolby Pro Logic

Surround sound.

Setting up the speakers for Dolby Pro

Logic (continued)

Press

CENTER LEVEL +/– on

the remote.

REAR LEVEL +/– on the

remote.

Setting the clock

1 Turn on the system.

2 Press c/CLOCK SET (or CLOCK/TIMER

SET on the remote).

3 Press R/r repeatedly to set the hour.

4 Press ENTER.

The minute indication flashes.

5 Press R/r repeatedly to set the minute.

6 Press ENTER.

The clock starts working.

If you make a mistake

Press T/t repeatedly until the incorrect item

flashes, then set it again.

To adjust the clock

1 Press c/CLOCK SET (or CLOCK/TIMER

SET on the remote).

2 Press R/r to select “CLOCK SET,” then

press ENTER.

3 Do the same procedures as step 3 to 6

above.

Notes

• The clock settings are canceled when you

disconnect the power cord or if a power failure

occurs.

• You cannot set the clock in the Power Saving

Mode.

Press

T or t while “LEFT”,

“CENTER”, or “RIGHT”

appears.

T or t while “REAR”

appears.

VIDEO CD/CD/MP3 files

Loading a disc

1 Press PUSH OPEN.

The front cover opens.

2 Place a disc with the label side up on

the disc tray.

To insert additional discs, press DISC SKIP

to rotate the disc tray.

3 Close the front cover.

Playing a VIDEO CD

––Normal Play/Shuffle Play/Repeat

Play

You can play both VIDEO CDs without PBC

functions (Ver.1.1) and VIDEO CDs with PBC

functions (Ver.2.0).

This unit lets you play the VIDEO CD in

different play modes.

1 Turn on your TV and select the video

input.

Refer to the instructions included with your

TV for details.

When you play

a CD single,

place it on the

inner circle of

the tray.

continued

Disc number in the playing position

Track number Playing time

2 Press FUNCTION (or FUNCTION +/– on

the remote) repeatedly until “CD”

appears.

3 Press PLAY MODE repeatedly in stop

mode until the mode you want appears.

Select

ALL DISCS*

(Normal Play)

1 DISC/ALBUM

(Normal Play)

ALL DISCS

SHUFFLE

(Shuffle Play)

1 DISC SHUFFLE/

ALBUM SHUFFLE

(Shuffle Play)

PROGRAM

(Program Play)

* Depending on VIDEO CDs with PBC function

(Ver.2.0), the disc does not change.

4 Press HX (or CD N on the remote).

To play

All VIDEO CDs in the disc

tray continuously.

The VIDEO CD you

selected in the original

order.

The tracks on all VIDEO

CDs in random order.

The tracks on the VIDEO

CD you selected in random

order.

The tracks on all VIDEO

CDs in the order you want

them to be played (see

“Programming the VIDEO

CD/CD tracks” on page

15).

There may be some disturbance in the paused

video image.

Only when PBC function is set to off or when

playing VIDEO CDs without PBC functions (Ver.

1.1).

DISC 1 to 5 are not available when “ALL DISCS

SHUFFLE” is selected.

You cannot select “REPEAT” and “ALL DISCS

SHUFFLE” at the same time.

Tip

You can change the VIDEO CD in the loading

position during playback of the VIDEO CD in the

playing position.

To enter a track number using the

remote

You can also select the desired track using the

remote during Normal Play.

Press the numeric buttons. The playback

automatically starts.

To enter a track number over 10

1 Press >10.

2 Enter the corresponding digits.

To enter 0, press 10/0 instead.

Example:

To enter track number 30, press>10, then 3 and 10/0.

Playing a VIDEO CD (continued)

Other Operations

Stop playback

Pause

Select a track

Find a point

in a track or scene

(Lock Search function)

Select a VIDEO CD in

stop mode

Switch to VIDEO CD

function from another

source

Play repeatedly

(Repeat Play)

Remove the VIDEO

Do this

Press x.

Press HX (or X on the

remote)*

. Press again to

resume play (or CD N on

the remote).

Turn . AMS >

clockwise (to go forward) or

counterclockwise (to go

backward) and release it

when you reach the desired

track. (Or press > (to go

forward) or . (to go

backward) on the remote.)*

Press M or m during

playback.

1 Press once to start

searching.

2 Press again to increase

the search speed. Each time

you press the button, the

speed changes as follows:

1(slow) t 2 (normal) t

3 (high) t 1(slow)...

3 Press HX at the desired

point to stop searching.

Press one of the DISC 1to

or DISC SKIP.

Press any of the buttons,

DISC 1to 5 or HX (or CD

N on the remote)

(Automatic Source

Selection).

Press REPEAT during

playback until “REPEAT” or

“REPEAT1” appears.

REPEAT*

: For all the

tracks on the VIDEO CD up

to five times.

REPEAT1*

: For a single

track only.

To cancel playing

repeatedly, press REPEAT

until “REPEAT” or

“REPEAT1” disappears.

Press PUSH OPEN.

VIDEO CD/CD/MP3 files

Stop play

Go to the next menu

page or scene

Go back to the previous

menu page or scene

Go back to the previous

Playing a VIDEO CD with

the PBC functions (Ver.

2.0)

–– PBC Play

You can use menus on your TV screen to enjoy

the disc’s interactive software. The menu

format and structure will differ with each disc.

1 Start playing a VIDEO CD with PBC

functions (Ver. 2.0).

A PBC menu appears on your TV and

“PBC” appears in the display.

2 Turn . AMS > to select a number

from the menu, then press SELECT (or

press numeric buttons on the remote).

3 Continue according to the instructions

on the menus to enjoy interactive

playback.

Do this

Press x.

Press NEXT.

Press PREV.

Press RETURN (or

RETURN O on the

remote).

Tips

• When appears on the TV screen, you have

pressed an invalid button. Press a button indicated

by the instructions on the menu screen.

• When you press NEXT during menu playback or

while playing moving pictures, the next scene on

the disc appears. Also refer to the instructions

supplied with the disc.

• “PBC” appears for the disc with PBC functions, and

“PBC OFF” appears when its function is canceled.

Note

Depending on the disc, the player may not be able to

advance to the next disc during playback even when

“ALL DISCS” is selected.

Press DISC SKIP to go to the next disc.

Cancel playback with

PBC functions (Ver.2.0)

Play with PBC functions

(Ver.2.0) following the

cancellation above

Select a menu number

using the remote

Do this

In the stop mode, turn

. AMS > (or

press ./ > on the

remote) to select the

desired track, then press

HX (or press the

numeric buttons on the

remote).

The PBC OFF indicator

lights up and playback

begins from the selected

track. Still images such

as menu screens will not

be shown.

In stop mode, press x.

Press numeric buttons

(see “To enter a track

number using the

remote” on page 12).

Other Operations

Stop playback

Pause

Select a track

Find a point in a track

(Lock Search function)

Select a CD

Switch to CD function

from another source

Disc number in the playing position

Track number Playing time

Playing a CD

––Normal Play/Shuffle Play/Repeat

Play

This unit lets you play the CD in different play

modes.

1 Press FUNCTION (or FUNCTION +/– on

the remote) repeatedly until “CD”

appears.

2 Press PLAY MODE repeatedly in stop

mode until the mode you want appears.

Select

ALL DISCS

(Normal Play)

1 DISC/ALBUM

(Normal Play)

ALL DISCS

SHUFFLE

(Shuffle Play)

1 DISC SHUFFLE/

ALBUM SHUFFLE

(Shuffle Play)

PROGRAM

(Program Play)

3 Press HX (or CD N on the

remote).

To play

All CDs in the disc tray

continuously.

The CD you selected in the

original order.

The tracks on all CDs in

random order.

The tracks on the CD you

selected in random order.

The tracks on all CDs in the

order you want them to be

played (see “Programming

the VIDEO CD/CD tracks”

on page 15).

Do this

Press x.

Press HX (or X on the

remote). Press again to

resume play.

During play or pause, turn

. AMS > clockwise

(to go forward) or

counterclockwise (to go

backward) (or press >

(to go forward) or . (to

go backward) on the

remote).

Press M or m during

playback.

At the desired point, press

HX to stop searching.

Press DISC 1 to 5*

DISC SKIP.

Press DISC 1 to 5 or HX

(or CD N on the remote)

(Automatic Source

Selection).

VIDEO CD/CD/MP3 files

Play repeatedly

(Repeat Play)

Remove the CD

DISC 1 to 5 are not available when “ALL DISCS

SHUFFLE” is selected.

You cannot select “REPEAT” and “ALL DISCS

SHUFFLE” at the same time.

Tip

You can change the CD in the loading position during

playback of the CD in the playing position.

Programming the VIDEO

CD/CD tracks

–– Program Play

You can make a program of up to 25 tracks

from all the VIDEO CD/CDs in the order you

want them to be played.

1 Press FUNCTION (or FUNCTION +/– on

the remote) repeatedly until “CD”

appears, then load a CD.

2 Press PLAY MODE repeatedly until

“PROGRAM” appears.

3 Press one of DISC 1 to 5 to select a

disc.

4 Turn . AMS > until the track you

want appears.

5 Press PLAY MODE once.

The track is programmed. First the

programmed playing order and “STEP”

appear, then the total playing time appears.

6 To program additional tracks, repeat

steps 3 to 5.

Skip step 3 to select tracks from the same

disc.

7 Press HX.

Cancel Program Play

Clear a track from the

end

Add a track to the end

of the program in stop

mode

Press

PLAY MODE repeatedly

until “PROGRAM,” “ALL

DISCS SHUFFLE,”

“ALBUM SHUFFLE,” or “1

DISC SHUFFLE”

disappears.

CLEAR on the remote in

stop mode.

Perform step 3 to 5.

continued

Do this

Press REPEAT during

playback until “REPEAT”

or “REPEAT1” appears.

REPEAT*

: For all the

tracks on the CD up to five

times.

REPEAT1: For a single

track only.

To cancel playing

repeatedly, press REPEAT

until “REPEAT” or

“REPEAT1” disappears.

Press PUSH OPEN.

Playing a disc with MP3

files

About MP3 files

MP3 (MPEG 1 Audio Layer-3) is a standard

technology and format for compressing a sound

sequence. The file is compressed to about 1/10

of its original size. Sounds outside the range of

human hearing are compressed while the

sounds we can hear are not compressed.

Notes on discs

You can play MP3 files recorded on CD-

ROMs, CD-Rs (recordable CDs), and CD-RWs

(rewritable CDs).

The disc must be in the ISO 9660* level 1 or

level 2 format.

*ISO 9660 Format

The most common international standard for the

logical format of files and folders on a CD-ROM.

There are several specification levels. In Level 1,

file names must be in the 8.3 format (no more than

eight characters in the name, no more than three

characters in the extension “.MP3”) and in capital

letters. Folder names can be no longer than eight

characters. There can be no more than eight nested

folder levels. Level 2 specifications allow file names

and folder names up to 31 characters long.

To program the MP3 files

After step 3, press ALBUM +/– repeatedly

until the folder you want appears, and then go

to step 4.

Tips

• The program you made remains in the CD player

after it has been played back. Press HX to play

the same program again.

• “--.--” appears when the total CD program time

exceeds 100 minutes, when you select a CD track

whose number is 21 or over or when you

programmed MP3 files.

Programming the VIDEO CD/CD

tracks (continued)

VIDEO CD/CD/MP3 files

––Normal Play/Shuffle Play/Repeat

Play

This unit lets you play a disc with MP3 files in

different play modes.

1 Press FUNCTION (or FUNCTION +/– on

the remote) repeatedly until “CD”

appears.

2 Press PLAY MODE repeatedly in stop

mode until the mode you want appears.

Other Operations

Stop playback

Pause

Select a file

Select a folder*

Find a point in a file*

(Lock Search function)

Select a disc

Switch to disc function

from another source

Play repeatedly

(Repeat Play)

Remove the disc

You cannot select a folder during “ALL DISCS

SHUFFLE” or “1 DISC SHUFFLE.”

The search function works only for the currently

playing MP3 file. Searching for a point over two or

more MP3 files is therefore not possible.

Furthermore, the playing time may not be

displayed correctly depending on the MP3 file.

DISC 1 to 5 are not available when “ALL DISCS

SHUFFLE” is selected.

You cannot select “REPEAT” and “ALL DISCS

SHUFFLE” at the same time.

Select

ALL DISCS

(Normal Play)

1 DISC

(Normal Play)

ALBUM

(Normal Play)

ALL DISCS

SHUFFLE

(Shuffle Play)

1 DISC

SHUFFLE

(Shuffle Play)

ALBUM

SHUFFLE

(Shuffle Play)

PROGRAM

(Program Play)

To play

All discs in the disc tray

continuously.

The disc you selected in the

original order.

The folder you selected in the

original order.

The files on all discs in random

order.

The files on the disc you selected

in random order.

The files in the folder you

selected in random order.

The files on all discs in the order

you want them to be played (see

“Programming the VIDEO CD/

CD tracks” on page 15).

continued

3 Press HX (or CD N on the remote).

File number Playing time

Disc number in the playing position

Do this

Press x.

Press HX (or X on the

remote). Press again to

resume play.

During play or pause, turn

. AMS > clockwise

(to go forward) or

counterclockwise (to go

backward) (or press >

(to go forward) or . (to

go backward) on the

remote).

Press ALBUM +/– after

step 2.

Press M or m during

playback.

At the desired point, press

HX to stop searching.

Press DISC 1 to 5*

DISC SKIP.

Press DISC 1 to 5 or HX

(or CD N on the remote)

(Automatic Source

Selection).

Press REPEAT during

playback until “REPEAT”

or “REPEAT1” appears.

REPEAT*

: For all the files

on the disc up to five times.

REPEAT1: For a single file

only.

To cancel playing

repeatedly, press REPEAT

until “REPEAT” or

“REPEAT1” disappears.

Press PUSH OPEN.

Tips

• To select a file number with the remote, press the

numeric buttons after step 3.

Example:

To play file number 100 in a folder containing 100

files or more, press >10, then 1, and 10/0 twice.

• You can change the disc in the loading position

during playback of the disc in the playing position.

Notes

• With formats other than ISO 9660 level 1 and 2,

folder names or file names may not be displayed

correctly.

• When naming, be sure to add the file extension

“.MP3” to the file name.

• If you up the extension “.MP3” to a file other than

MP3, the unit cannot recognize the file properly and

will generate random noise that could damage your

speakers.

• The following discs take a longer time to start

playback.

– a disc recorded with complicated tree structure.

• When the disc is inserted, the player reads all the

files on that disc. If there are many folders or non-

MP3 files on the disc, it may take a long time for

play to begin or for the next MP3 files to start play.

• Do not save unnecessary folders or files other than

MP3 ones in the disc to be used for MP3 listening.

We recommend that you do not save other types

files or unnecessary folders on a disc that has MP3

files.

• A folder that does not include an MP3 files is

skipped.

• Maximum folder number: 255

(The maximum number of MP3 files and folders

that can be contained on a single disc is 512.)

• Playback is possible up to 8 levels. The MP3 files

are played in the order that they were recorded on

the disc.

• There may be exceptions to these rules depending

on the disc.

• Depending on the encoding/writing software,

recording device, or the recording media used at the

time an MP3 file is recorded, you may encounter

such problems as disabled playback, sound

interruptions, and noise.

Locating a specific part

on a VIDEO CD

–– Time Search/Disc Digest

The TV screen must be ON to use these

functions.

Use the remote for the operation.

Tips

• When you stop playback, press x.

• When you use VIDEO CDs with PBC functions

(Ver.2.0), cancel the PBC functions (see “Cancel

playback with PBC functions (Ver. 2.0)” on page

13).

Note

When the Time Search or Disc Digest function is

activated, Shuffle Play mode (SHUFFLE) or Program

Play mode (PROGRAM) automatically changes to

Normal Play mode (ALL DISCS).

Locating by elapsed time

–– Time Search

1 Press SPECIAL MENU in stop mode.

2 Press 1 to select “1) TIME SEARCH.”

3 Press the numeric buttons to enter the

time (in minutes) for the desired

section.

The selected elapsed time appears on the

TV screen.

To reenter the time, press CLEAR, and then

press the numeric buttons again.

4 Press SELECT.

Playback starts from the selected time.

Playing a disc with MP3 files

(continued)

VIDEO CD/CD/MP3 files

Locating the desired track

–– Disc Digest

You can select the desired track by viewing the

first frame of each track. 9 different tracks can

be displayed on the TV screen at one time.

1 Press SPECIAL MENU in stop mode.

2 Press 2 to select “2) DISC DIGEST.”

The first frame of tracks 1 through 9 on the

current disc appear.

3 Press the numeric buttons to select the

desired track.

To display the next 9 tracks

Press NEXT. The first frame of tracks 10

through 18 appear.

When there are more tracks in the disc, “>”

appears in the upper right corner of the TV

screen.

To display previous tracks, press PREV.

Resuming playback from

the point you stopped a

VIDEO CD

–– Resume Play

The system memorizes the point where you

stopped the VIDEO CD so you can resume

from that point.

Note that resume play is not available when

playing an audio CD and a disc with MP3 files.

1 While playing a VIDEO CD, press x to

stop playback.

“RESUME” appears on your TV screen. If

“RESUME” does not appear, Resume Play

is not available.

2 Press HX (or CD N on the remote).

The player starts playback from the point

you stopped the VIDEO CD in

step 1.

To view from the beginning of the

VIDEO CD

When “RESUME” appears on your TV screen,

press x, then press HX (or CD N on the

remote).

Notes

• Resume Play is not available in the Digest, Shuffle,

or Program Play modes.

• Depending on where you stopped the VIDEO CD,

the player may resume playback from a different

point.

• Resume play is cleared when:

– you press numeric buttons, PLAY MODE, x or

DISC SKIP or turn . AMS >.

– you remove the VIDEO CD.

– you unplug the system’s AC power cord.

– you turn off the system.

– you change the function.

Tuner

Presetting radio stations

You can preset up to 20 FM stations and 10

AM stations. You can then tune in any of those

stations simply by selecting the corresponding

preset number.

There are two ways to store the station presets.

Automatically tune in all

of the stations that can be

received in your area and

then store them manually

Manually tune in and

store the radio frequency

of your favorite stations

Setting presets through

automatic tuning

1 Press TUNER/BAND repeatedly to

select “FM” or “AM.”

2 Press TUNING MODE repeatedly until

“AUTO” appears.

3 Press TUNING –/+.

The frequency indication changes and the

scanning stops when the system tunes in a

station. “TUNED” and “STEREO” (for a

FM stereo program) appear.

If “TUNED” does not appear and

the scanning does not stop

Set the frequency of the desired radio

station as described in steps 2 through 6 of

“Setting presets through manual tuning.”

4 Press TUNER MEMORY.

Method

Automatic Tuning preset

Manual Tuning Preset

5 Press TUNING –/+ repeatedly to select

the desired preset number.

6 Press TUNER ENTER.

“COMPLETE” appears.

7 Repeat steps 1 to 6 to store other

stations.

Setting presets through

manual tuning

1 Press TUNER/BAND repeatedly to

select “FM” or “AM.”

2 Press TUNING MODE repeatedly until

“MANUAL” appears.

3 Press TUNING –/+ repeatedly to tune in

the desired station.

4 Press TUNER MEMORY.

5 Press TUNING –/+ repeatedly to select

the desired preset number.

6 Press TUNER ENTER.

“COMPLETE” appears.

7 Repeat steps 1 to 6 to store other

stations.

Preset number

Page is loading ...

Sony LBT-XGV10AV Operating instructions

Brand: Sony

Model: LBT-XGV10AV

Category: CD players

Type: Operating instructions

Download PDF

report

Sony LBT-XGV10AV Operating instructions

Sony LBT-XGV10AV Operating instructions

Related papers

Other documents