195955I
ELS — 9/6/22 Page 1 of 2 195955I
Seat Back Molle Rack Installation Instructions
Congratulations on your purchase of a high quality PUTCO product. Should you need any application
or technical assistance, feel free to call us at: 1-800-247-3974
Monday-Friday 8:00 a.m. - 5:00 p.m. (Central Standard Time)
Contact your PUTCO dealer for other quality accessories.
Please read all instrucons before installaon and to check to see that all parts are included.
KIT CONTENTS:
Description Qty.
Molle Seat Back Plate 1
Mounting Straps (pair) 2
No Tools Necessary!
195955I
ELS — 9/6/22 Page 2 of 2 195955I
Installation Instructions:
1. Attach the straps to the molle plate (Figure 1).
2. Remove the headrest from the seat. Slide one D-
ring on each top strap onto the headrest mounting
post (Figure 2) and reinstall the headrest onto the
seat.
3. Locate a suitable bar under the seat to attach the
lower hook strap (Figure 3).
4. Tighten the straps, but do not overtighten. The
elastic section should still have some stretch to
allow the seat to straighten up and recline.
Your new MOLLE Panel is now successfully
installed in your vehicle!
Figure 1. Strap locaon and orientaon.
Figure 2. Straps on the headrest.
Front of headrest
Figure 3. Hook aached to bar under seat.
/
