Putco 195955 Installation guide

195955I

ELS — 9/6/22 Page 1 of 2 195955I

Seat Back Molle Rack Installation Instructions

Congratulations on your purchase of a high quality PUTCO product. Should you need any application

or technical assistance, feel free to call us at: 1-800-247-3974

Monday-Friday 8:00 a.m. - 5:00 p.m. (Central Standard Time)

Contact your PUTCO dealer for other quality accessories.

Please read all instrucons before installaon and to check to see that all parts are included.

KIT CONTENTS:

Description Qty.

Molle Seat Back Plate 1

Mounting Straps (pair) 2

No Tools Necessary!

195955I

ELS — 9/6/22 Page 2 of 2 195955I

Installation Instructions:

1. Attach the straps to the molle plate (Figure 1).

2. Remove the headrest from the seat. Slide one D-

ring on each top strap onto the headrest mounting

post (Figure 2) and reinstall the headrest onto the

seat.

3. Locate a suitable bar under the seat to attach the

lower hook strap (Figure 3).

4. Tighten the straps, but do not overtighten. The

elastic section should still have some stretch to

allow the seat to straighten up and recline.

Your new MOLLE Panel is now successfully

installed in your vehicle!

Figure 1. Strap locaon and orientaon.

Figure 2. Straps on the headrest.

Front of headrest

Figure 3. Hook aached to bar under seat.