Casio CT-S500 is a versatile musical instrument that combines a 61-key keyboard, various sound effects, and a user-friendly interface, making it suitable for beginners, hobbyists, and even professional musicians. With its diverse sound library, it offers a wide range of musical genres and styles to explore, allowing you to create and perform your own compositions. Additionally, its compatibility with MIDI devices and the ability to connect to external speakers or headphones provide enhanced flexibility for practice, performance, and recording.
Casio CT-S500 is a versatile musical instrument that combines a 61-key keyboard, various sound effects, and a user-friendly interface, making it suitable for beginners, hobbyists, and even professional musicians. With its diverse sound library, it offers a wide range of musical genres and styles to explore, allowing you to create and perform your own compositions. Additionally, its compatibility with MIDI devices and the ability to connect to external speakers or headphones provide enhanced flexibility for practice, performance, and recording.
CT-S500(Firmware Version 1.06 or higher)
CT-S1000V(Firmware Version 1.02 or higher)
MIDI Implementation
CASIO COMPUTER CO., LTD.
Contents
I Overview 4
1 Product Configuration as a MIDI Device 4
1.1 SystemSection.......................................... 4
1.2 Performance Controller Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.3 SoundGeneratorSection .................................... 4
2 Timbre Type Specific Operation 7
3 Controlling Send/Receive of MIDI Messages in Each Instrument Part 7
4 Conditions that Disable Message Send and Receive 8
II Channel Message 9
5 Note Off 9
6 Note On 9
7 Control Change 9
7.1 BankSelect(00H,20H) ..................................... 9
7.2 Modulation wheel or lever (01H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7.3 PortamentoTime(05H)..................................... 10
7.4 DataEntry(06H,26H)...................................... 10
7.5 ChannelVolume(07H) ..................................... 11
7.6 Pan(0AH) ............................................ 11
7.7 ExpressionController(0BH) .................................. 11
7.8 Damper pedal (sustain) (40H) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.9 PortamentoOn/Off(41H).................................... 12
7.10 Sostenuto(42H) ......................................... 12
7.11 SoftPedal(43H)......................................... 13
7.12 FilterResonance(47H) ..................................... 13
7.13 ReleaseTime(48H) ....................................... 13
7.14 AttackTime(49H)........................................ 13
7.15 Filter Cutoff Frequency (4AH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7.16 VibratoRate(4CH) ....................................... 14
1
7.17 VibratoDepth(4DH) ...................................... 14
7.18 VibratoDelay(4EH) ...................................... 15
7.19 PortamentoControl(54H) ................................... 15
7.20 ReverbSendLevel(5BH).................................... 15
7.21 ChorusSendLevel(5DH).................................... 15
7.22 DelaySendLevel(5EH)..................................... 16
7.23 RPN(64H,65H) ......................................... 16
7.24 AllSoundOff(78H)....................................... 17
7.25 ResetAllControllers(79H)................................... 17
7.26 AllNotesOff(7BH)....................................... 17
7.27 Omni Mode Off (All Notes Off) (7CH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.28 Omni Mode On (All Notes Off) (7DH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7.29 Mono Mode On (Poly Mode Off) (All Notes Off) (7EH) . . . . . . . . . . . . . . . . . . . 18
7.30 Poly Mode On (Mono Mode Off) (All Notes Off) (7FH) . . . . . . . . . . . . . . . . . . . 18
8 Program Change 18
9 Channel Pressure (Aftertouch) 19
10 Pitch Bend Change 19
III System Message 21
11 Timing Clock 21
12 Active Sensing 21
13 System Exclusive Message 21
13.1 Universal Real Time System Exclusive Message . . . . . . . . . . . . . . . . . . . . . . . . 21
13.2 Universal Non Real Time System Exclusive Message . . . . . . . . . . . . . . . . . . . . . 23
13.3 CASIO General System Exclusive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
IV Setting Values and Send/ Receive Values 30
14 Setting Value Tables 30
14.1 0-127SettingValueTable................................... 30
14.2 Off/OnSettingValueTable................................... 30
14.3 Sustain Pedal Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
14.4 –64 - 0 - +63 Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
14.5 PanSettingValueTable..................................... 30
14.6 Fine Tuning Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
14.7 Reverb Type Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
14.8 Chorus Type Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
14.9 Reverb Type (CASIO General System Exclusive) Setting Value Table . . . . . . . . . . . 31
14.10 Chorus Type (CASIO General System Exclusive) Setting Value Table . . . . . . . . . . . 32
14.11 Delay Type (CASIO General System Exclusive) Setting Value Table . . . . . . . . . . . . 32
14.12 Lyric Speed Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
14.13 GenderSettingValueTable................................... 33
14.14 AgeSettingValueTable..................................... 33
14.15 Vocalist Single Parameter Setting Value Table . . . . . . . . . . . . . . . . . . . . . . . . 34
2
V MIDI Implementation Notation 35
15 Value Notation 35
15.1 HexadecimalNotation...................................... 35
15.2 BinaryNotation ......................................... 35
3
Part I
Overview
1 Product Configuration as a MIDI Device
As a MIDI device, this Instrument consists of the System Section, Sound Generator Section, and Per-
formance Controller Section described below. Each of these sections can send and receive specific MIDI
Messages in accordance with its function.
1.1 System Section
The System Section manages the Instrument status and user data.
1.2 Performance Controller Section
The Performance Controller Section performs keyboard play and controller operations, and generates
performance messages. Basically, generated performance messages are sent to external destinations
while also being transmitted to the Sound Generator Section. The channel number of the sent channel
message is in accordance with the Instrument’s MIDI setting. For details about the MIDI setting, see
the Instrument’s User’s Guide.
1.3 Sound Generator Section
The Sound Generator Section mainly performs receive of performance information and sound source
setting information. It consists of a common part that does not depend on the channel and a musical
instrument part that is independent of each channel.
1.3.1 Sound Generator Common Block
The common block consists of system effects, master control, etc. These can be controlled effect function,
general universal system exclusive messages, or the Instrument’s system exclusive messages or all. There
are two types of system effects on this instrument: system effects applied to keyboard playing parts and
system effects applied to other parts.
1.3.2 Instrument Part Block
The instrument part section is devided into A, B, C group for every 16 parts, and it consists of a total
of 48 parts. The settings of each part can be changed using channel messages or Instrument’s system
exclusive messages or all. Of these, only the C group and some of the A group channels can be controlled
by external channel messages.
The functions assigned to each part are shown below.
4
Port Part number MIDI Receive Ch MIDI Transmit ch Assigned
Function
Details System
Effects
Classifica-
tion
A 01 1* 1-16 Upper1/MIDI* - Keyboard
A 02 2* 1-16 Upper2/MIDI* - Keyboard
A 03 3* 1-16 Lower/MIDI* - Keyboard
A 04 4* - -/MIDI* - Keyboard
A 05 5* 1-16 Auto
Harmo-
nize/MIDI*
- Keyboard
A 06 - 6 - - Others
A 07 - 7 - - Others
A 08 - 8 Metronome - Others
A 09 - 9 Accomp Percussion Others
A 10 - 10 Accomp Drum Others
A 11 - 11 Accomp Bass Others
A 12 - 12 Accomp Chord1 Others
A 13 - 13 Accomp Chord2 Others
A 14 - 14 Accomp Chord3 Others
A 15 - 15 Accomp Chord4 Others
A 16 - 16 Accomp Chord5 Others
5
Port Part number MIDI Receive Ch MIDI Transmit Ch Assigned
Function
Details System
Effects
Classifica-
tion
B 17 - - Recorder System
Track
Upper1
Others
B18 --Recorder System
Track
Upper2
Others
B 19 - - Recorder System
Track
Lower
Others
B 20 - - - - Others
B 21 - - Recorder System
Track Auto
Harmonize
Others
B 22 - - - - Others
B 23 - - - - Others
B 24 - - Precount - Others
B 25 - - - - Others
B 26 - - - - Others
B 27 - - - - Others
B 28 - - - - Others
B 29 - - - - Others
B 30 - - - - Others
B 31 - - - - Others
B 32 - - - - Others
6
Port Part number MIDI Receive Ch MIDI Transmit Ch Assigned
Function
Details System
Effects
Classifica-
tion
C 33 1* - MIDI*/Auto
Play/Recorder
Recorder
Solo Track1
Others
C 34 2* - MIDI*/Auto
Play/Recorder
Recorder
Solo Track2
Others
C 35 3* - MIDI*/Auto
Play/Recorder
Recorder
Solo Track3
Others
C 36 4* - MIDI*/Auto
Play/Recorder
Recorder
Solo Track4
Others
C 37 5* - MIDI*/Auto
Play/Recorder
Recorder
Solo Track5
Others
C 38 6 - MIDI/Auto
Play
- Others
C 39 7 - MIDI/Auto
Play
- Others
C 40 8 - MIDI/Auto
Play
- Others
C 41 9 - MIDI/Auto
Play
- Others
C 42 10 - MIDI/Auto
Play
- Others
C 43 11 - MIDI/Auto
Play
- Others
C 44 12 - MIDI/Auto
Play
- Others
C 45 13 - MIDI/Auto
Play
- Others
C 46 14 - MIDI/Auto
Play
- Others
C 47 15 - MIDI/Auto
Play
- Others
C 48 16 - MIDI/Auto
Play
- Others
Note: * : Depending on the MIDI IN 1-5 Ch port settings of this instrument, only one of the C port and A port will be
enabled.
2 Timbre Type Specific Operation
The sound source operation performed for a sound generator instrument receive message may depend
on the value of the Timbre Type (see “About the Timbre Type” in “8 Program Change”) of each part’s
operation mode. For details, see the explanation for each message.
3 Controlling Send/Receive of MIDI Messages in Each Instru-
ment Part
Send and receive of MIDI messages for each instrument part can be controlled by global Instrument
MIDI settings and Instrument-specific system exclusive messages. See the Instrument’s User’s Guide for
7
details.
4 Conditions that Disable Message Send and Receive
No MIDI messages at all can be sent or received while the instrument starts up, shuts down, ”Wait” is
on the display, etc.
8
Part II
Channel Message
5 Note Off
Format
Message Format: 8nH kkH vvH
9nH kkH 00H(receive only)
n: MIDI Channel Number
kk: Key Number
vv: velocity
Transmit Sent when something is played on the keyboard or when play is performed using an arpeggio,
etc. The key number changes in accordance with on the Transpose function and Octave Shift function.
Receive Receipt stops a note being sounded by a note on message.
6 Note On
Message Format: 9nH kkH vvH
n: MIDI Channel Number
kk: Key Number
vv: Velocity
Transmit Sent when something is played on the keyboard or when play is performed using an arpeggio,
etc. The key number changes in accordance with on the Transpose function and Octave Shift function.
Receive Receipt sounds a note of the corresponding instrument part.
7 Control Change
Message Format: BnH ccH vvH
n: MIDI Channel Number
cc: Control Number
vv: Value
For details about messages, see each section of this manual that covers them.
7.1 Bank Select (00H,20H)
Message Format: BnH 00H mmH (MSB)
BnH 20H llH (LSB)
n: MIDI Channel Number
mm: MSB Value(Note1)
ll: LSB Value(Transmit:40H-41H, Receive:00H-0FH/40H-41H)
9
Note1: For details about the relationship between the MSB value and the tone, see the Tone List that comes with the
Instrument.
Transmit Sent when a tone setup number is selected.
Receive Receipt causes a change in the tone bank number stored in Instrument memory, but the
tone is not actually changed until a Program Change message is received. For details, see “8 Program
Change”. If specified by adding 40H to LSB Value, the type of reverb, chorus, and delay will change
according to the tone when the tone is changed in the Program Change message.
If 74H is specified for the MSB Value, it will operate as a setup recall for the registration function
when a Program Change message is received. The LSB Value will be ”Registration Bank Number - 1”.
(00H-0FH) Setup recall will not be executed until a Program Change message is received. For details,
see “8 Program Change”.
7.2 Modulation wheel or lever (01H)
Message Format: BnH 01H vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when the knob is operated by setting.
Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
7.3 Portamento Time (05H)
Message Format: BnH 05H vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when portament time is used. Sent when the knob is operated by setting.
Receive Receipt changes the portamento application time.
7.4 Data Entry (06H,26H)
Message Format: BnH 06H mmH (MSB)
BnH 26H llH (LSB)
n: MIDI Channel Number
mm: MSB Value
ll: LSB Value
Transmit Sent when there is a change to the parameter assigned to RPN, NRPN.
Receive Receipt changes the parameter assigned to RPN, NRPN.
10
7.5 Channel Volume (07H)
Message Format: BnH 07H vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when part volume is used. Sent when the knob is operated by setting.
Receive Receipt changes the part volume.
7.6 Pan (0AH)
Message Format: BnH 0AH vvH
n: MIDI Channel Number
vv: Value(Note1)
Note1: For information about the relationship between setting values and send/receive values, see “14.5 Pan Setting Value
Table” in “IV Setting Values and Send/Receive Values”.
Transmit Sent when part pan is used. Sent when the knob is operated by setting.
Receive Receipt changes the pan of the corresponding part.
7.7 Expression Controller (0BH)
Message Format: BnH 0BH vvH
n: MIDI Channel Number
vv: Value
Transmit Transmitted by setting when expression pedal is connected to this Instrument.
Receive Receipt changes the expression value.
7.8 Damper pedal (sustain) (40H)
Message Format: BnH 40H vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when a pedal that has a sustain function is operated.
Receive Receipt performs an operation equivalent to a sustain pedal operation.
11
Timbre Type Specific Operation This operation differs in accordance with the Timbre Type (see
“About the Timbre Type” in “8 Program Change”) setting.
•Timbre Type: Melody,Hex Layer
Sustain off/on control is performed in accordance with the value of the received message. For
information about the relationship between setting values and send/receive values, see the “14.2
Off/On Setting Value Table” in “IV Setting Values and Send/Receive Values”.
•Timbre Type: Piano
Continuous control of the following is performed in accordance with the value of the received
message.
–Piano note decay rate
For information about the relationship between setting values and send/receive values, see “14.3
Sustain Pedal Setting Value Table” in “IV Setting Values and Send/Receive Values.”
•Timbre Type: LM (Linear Morphing) Piano
Continuous control of the following is performed in accordance with the value of the received
message.
–Piano note decay rate
–Resonance characteristics and decay rate of Damper Resonance effect resonance note
see “14.3 Sustain Pedal Setting Value Table” in “IV Setting Values and Send/Receive Values.”
•Timbre Type: Drum The received message does not affect sound source operation.
7.9 Portamento On/Off (41H)
Message Format: BnH 41H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.2 Off/On Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the portament on/off is changed.
Receive Receipt changes the portamento on/off setting.
7.10 Sostenuto (42H)
Message Format: BnH 42H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.2 Off/On Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when a pedal that has a sostenuto function is operated.
12
Receive Receipt performs an operation equivalent to a sostenuto pedal operation.
7.11 Soft Pedal (43H)
Message Format: BnH 43H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.2 Off/On Setting
Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when a pedal that has a soft pedal function is operated.
Receive Receipt performs an operation equivalent to a soft pedal operation.
7.12 Filter Resonance (47H)
Message Format: BnH 47H vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when the knob is operated by setting.
Receive Receipt changes the filter resonance intensity.
7.13 Release Time (48H)
Message Format: BnH 48H vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.4 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit It will be changed when sustain is used and when setting is changed. Sent when the knob
is operated by setting.
Receive Receipt makes a relative change in the time it takes for a note to decay to zero after a key is
released.
7.14 Attack Time (49H)
Message Format: BnH 49H vvH
n: MIDI Channel Number
vv: Value (Note1)
13
Note1: For information about the relationship between setting values and send/receive values, see the “14.4 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the knob is operated by setting.
Receive Receipt makes a relative change in the time it takes for a note to rise to its maximum level.
7.15 Filter Cutoff Frequency (4AH)
Message Format: BnH 4AH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.4 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the knob is operated by setting.
Receive Receipt changes the filter cutoff frequency.
7.16 Vibrato Rate (4CH)
Message Format: BnH 4CH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.4 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the knob is operated by setting.
Receive Receipt changes the rate of vibrato.
7.17 Vibrato Depth (4DH)
Message Format: BnH 4DH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.4 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the knob is operated by setting.
Receive Receipt changes the depth of vibrato.
14
7.18 Vibrato Delay (4EH)
Message Format: BnH 4EH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note1: For information about the relationship between setting values and send/receive values, see the “14.4 –64 - 0 - +63
Setting Value Table” in “IV Setting Values and Send/Receive Values” of this document.
Transmit Sent when the knob is operated by setting.
Receive Receipt changes the delay time of vibrato.
7.19 Portamento Control (54H)
Message Format: BnH 54H vvH
n: MIDI Channel Number
vv: Source Key Number
Receive Receipt of this message first stores the Source Note Number for the next note. When the next
Note On is received, the portamento effect is applied to the note using this Source Note Number as the
pitch start point and the Note On event key number as the end point. If there already is a note being
sounded by Source Note Number at this time, the new note on is not performed and the portamento
effect is applied to the pitch of the note being sounded. That is to say that legato play is performed.
7.20 Reverb Send Level (5BH)
Message Format: BnH 5BH vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when the knob is operated by setting. Sent when GM tone is selected.
Receive Receipt changes the reverb send of the corresponding part.
7.21 Chorus Send Level (5DH)
Message Format: BnH 5DH vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when the knob is operated by setting. Sent when Chorus type or GM tone is selected.
Receive Receipt changes the chorus send of the corresponding part.
15
7.22 Delay Send Level (5EH)
Message Format: BnH 5EH vvH
n: MIDI Channel Number
vv: Value
Transmit Sent when the knob is operated by setting. Sent when Delay type or GM tone is selected.
Receive Receipt changes the delay send of the corresponding part.
7.23 RPN (64H,65H)
Message Format: BnH 64H llH (LSB)
BnH 65H mmH (MSB)
n: MIDI Channel Number
ll: LSB Value
mm: MSB Value
7.23.1 Pitch Bend Sensitivity
Message Format: BnH 64H 00H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: MSB Value(00H - 18H)
ll: LSB Value(Transmit:00H, Receive:Ignored)
Transmit Sent when calling Registration. Sent when the bend range is changed.
Receive Receipt changes bend range of the corresponding part.
7.23.2 Channel Fine Tuning
Message Format: BnH 64H 01H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: MSB Value
ll: LSB Value
Transmit Sent when calling Registration.
Receive Receipt changes the fine tune of the corresponding part.
16
7.23.3 Channel Coarse Tune
Message Format: BnH 64H 02H
BnH 65H 00H
BnH 06H mmH
BnH 26H llH
n: MIDI Channel Number
mm: MSB Value(28H - 58H)
ll: LSB Value(Transmit:00H, Receive:Ignored)
Transmit Sent when calling Registration.
Receive Receipt changes the coarse tune of the corresponding part. Does not affect sound source
operation when the Timbre Type (see “About the Timbre Type” in “8 Program Change”) is Drum.
7.23.4 Null
Message Format: BnH 64H 7FH
BnH 65H 7FH
n: MIDI Channel Number
Transmit Sent when there is a change to the parameter assigned to RPN, NRPN.
Receive Receipt de-selects RPN, NRPN.
7.24 All Sound Off (78H)
Message Format: BnH 78H 00H
n: MIDI Channel Number
Transmit Sent when MIDI send related settings are changed.
Receive Receipt stops all voices that are sounding.
7.25 Reset All Controllers (79H)
Message Format: BnH 79H 00H
n: MIDI Channel Number
Transmit Sent when MIDI send related settings are changed.
Receive Receipt initializes each performance controller.
7.26 All Notes Off (7BH)
Message Format: BnH 7BH 00H
n: MIDI Channel Number
17
Receive Receipt releases (key release) all voices that are sounding.
7.27 Omni Mode Off (All Notes Off) (7CH)
Message Format: BnH 7CH 00H
n: MIDI Channel Number
Receive Receipt performs the same operation as when All Notes Off is received.
7.28 Omni Mode On (All Notes Off) (7DH)
Message Format: BnH 7DH 00H
n: MIDI Channel Number
Note: This Instrument always operates in Omni Mode Off.
Receive Receipt performs the same operation as when All Notes Off is received.
7.29 Mono Mode On (Poly Mode Off) (All Notes Off) (7EH)
Message Format: BnH 7EH 00H
n: MIDI Channel Number
Note: This Instrument always operates in Poly Mode On.
Receive Receipt performs the same operation as when All Notes Off is received.
7.30 Poly Mode On (Mono Mode Off) (All Notes Off) (7FH)
Message Format: BnH 7FH 00H
n: MIDI Channel Number
Receive Receipt performs the same operation as when All Notes Off is received.
8 Program Change
Message Format: CnH ppH
n: MIDI Channel Number
pp: Program Number (Note1)
Note1: For details about the relationship between the program number and the tone, see the Tone List that comes with the
Instrument.
Transmit Sent when a tone number is selected.
18
Receive Receipt changes the tone of the corresponding part. The selected tone is determined by the
program value of this message and the Bank Select message value received prior to this message. Also
note that receipt of this message also may change the Timbre Type that corresponds to the selected
tone. For more information, see “About the Timbre Type” below.
If the MSB of the last Bank Select message received on the channel is 74H, the setup recall of
the registration function will be executed instead of changing the tone. A valid Program Number is
”Registration Area Number - 1”. (00H-03H)
About the Timbre Type Tones that are selected by each Instrument part have an attribute that
depends on the sound source operation type. This attribute is called the “timbre type,” which is one of
the types described below.
•Melody
This timbre type optimizes for normal melody tones. The damper pedal performs on/off operations.
•Piano
This Timbre Type is for piano tones. The decay rate of the voice being sounded is seamlessly altered
in accordance with the damper pedal position. The method for producing sound in response to the
note messages also is different from that of the melody Timbre Type, and operation is optimized
for piano.
•LMPiano
This Timbre Type is for Linear Morphing piano tones. The decay rate of the voice being sounded
and Damper Resonance effect characteristics are seamlessly altered in accordance with the damper
pedal position. The method for producing sound in response to the note messages also is different
from that of the melody Timbre Type, and operation is optimized for piano.
•Drum
This setting optimizes for drum sounds. The damper pedal does not function. The Hold1, Channel
Coarse Tune, and Master Coarse Tune messages are ignored if they are received.
9 Channel Pressure (Aftertouch)
Message Format: DnH vvH
n: MIDI Channel Number
vv: Value
Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
10 Pitch Bend Change
Message Format: EnH llH mmH
n: MIDI Channel Number
ll: Value LSB
mm: Value MSB
Transmit Sent when the pitch bend wheel is operated.
19
Receive Receipt changes the pitch of the currently sounding note. The range of the pitch change
depends on the bend range value setting.
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
Casio CT-S500 is a versatile musical instrument that combines a 61-key keyboard, various sound effects, and a user-friendly interface, making it suitable for beginners, hobbyists, and even professional musicians. With its diverse sound library, it offers a wide range of musical genres and styles to explore, allowing you to create and perform your own compositions. Additionally, its compatibility with MIDI devices and the ability to connect to external speakers or headphones provide enhanced flexibility for practice, performance, and recording.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Casio EP-S330 User manual
-
Casio PX-S1000 User manual
-
-
-
Casio CT-X3100 MIDI uygulamalar
-
Casio CT-X700 MIDI Implementation
-
-
Casio AP-620 User manual
-
-