Rugged Ridge 12111.01 Installation guide

Rugged Ridge Bag

OPERATING INSTRUCTIONS:

Step 1) Unroll the Outland Bag. The top of the Bag has a plastic lining.

Step 2) Place the Bag on top of your vehicle, with the Bag’s large opening towards the rear of the

vehicle.

Step 3) Secure the Bag to the vehicle using the 4 side straps.

a) Luggage or Cross Bar Installation. Secure the 4 straps to the Bars with the strap’s buckles.

Cinch the straps as tight as possible.

b) Traditional Installation. Open the doors of the vehicle. Wrap the straps around the roof and

secure with the strap’s buckles. Cinch the straps as tight as possible.

c) Basket Installation. If you have a Smittybilt or BVG basket the Outland will fit into the basket

snuggly. Attach the straps around the bottom bar of the basket and use the strap’s buckles to

secure. Cinch the straps as tight as possible.

Step 4) Load the Bag with any gear you want to carry.

Step 5) Zip the Bag shut. Use the 2 rear straps to cinch down any slack in the Bag.

Step 5)

Rear Cinch Stra

s Step 3)

Side Attachment Straps

Front of Vehicle

Made in China

Download PDF