EKO KSB212WDA User manual

Brand: EKO

Model: KSB212WDA

Type: User manual

EKO KSB212WDA 2.1.2CH Dolby Atmos Soundbar with Wireless Subwoofer delivers an immersive audio experience with its upward-firing speakers, creating a cinematic surround sound effect. Connect your devices via HDMI, optical, or AUX input and enjoy your favorite content. Stream music wirelessly from your phone or tablet via Bluetooth. Enhance your audio with multiple EQ modes and adjust treble and bass levels to your preference. The soundbar automatically pairs with the subwoofer, providing a seamless audio setup.

2.1.2CH DOLBY ATMOS

SOUNDBAR WITH

WIRELESS SUBWOOFER

KSB212WDA

INSTRUCTION

MANUAL

Please read this manual carefully before using, and keep it for future reference.

General Safety Instructions 4

Remote Control 7

Product Overview 9

Product Placement 11

First Time Setup with SUBWOOFER 12

Controls and Connections 13

HDMI Ports - How To Use 15

General Operations 16

Pairing your soundbar 17

DOLBY ATMOS 18

Troubleshooting 19

Speciﬁcations 20

Support Last Page

CONTENTS

Read this manual thoroughly before you start using the Soundbar.

Store this manual, the completed warranty card, your receipt and the product packaging.

The safety precautions instructions reduces the risk of ﬁre, electric shock and injury when

correctly complied to.

Please follow all instructions and take notice of all warnings.

• Only using furniture that can safely support the Products.

• Ensure the Product is not overhanging the edge of the supporting furniture.

• Do not place the product on a high furniture without securing both the furniture

and the product to a stable support.

• Do not place the product on cloth or other conductive materials.

• Warn children of the dangers of climbing on furniture to reach the soundbar

or its controls and to call for an adult to assist.

• Do not expose this product to rain or moisture as it may result in ﬁre or an

electric shock hazard

• Do not temper or change or modify the product in any way.

• Only use Accessories outlined and recommended by the manufacturer.

• Please do not expose the product to splashing or water contact

• Please do not place any object on top of the product

IMPORTANT INFORMATION

GENERAL SAFETY INSTRUCTIONS

Please follow instruction when installing this product in accordance with the

instruction manual. This product must be positioned in a suciently stable

location, it can be potentially hazardous due to falling when mounted and can

cause injury, particularly to children if it positioned incorrectly.

• Before installing this Soundbar, make sure your outlet voltage corresponds to the

voltage stated on the power supply rating label

• The apparatus shall not be exposed to dripping or splashing and no objects ﬁlled

with liquids, such as vases, shall be placed on the product. Dry location use only.

• No naked ﬂame source, such as candles, should be placed on the product.

• Ventilation should not be impeded by covering the ventilation openings.

• Do not plug several devices into the same outlet. Doing so may cause the outlet

to overheat and start a ﬁre. Make sure the outlet is readily accessible during

operation of the equipment.

• No naked ﬂame source, such as candles, should be placed on the product.

• Unplug the Soundbar during lightning storms or when unused for long periods of

time. Not doing so may result in ﬁre or electric shock.

• Do not cover the ventilation openings of the product with items such as

newspapers, tablecloths, curtains etc. Do not insert objects into the slots

available on the products. As this could result in the product being damaged and

could cause a ﬁre.

GENERAL SAFETY INSTRUCTIONS (Cont.)

• If you notice any unusual odors or smoke around the unit, immediately disconnect the

unit from the outlet and contact the service center. Failure to do so may result in ﬁre

or electric shock.

• When not using the unit for long periods of time or when you are moving the unit

please ensure to disconnect the power supply from the wall socket.

• Please beware that dust could accumulate over time on the unit and cause it to generate

heat and or deteriorate insulation, which in turn may result in an electrical ﬁre.

• The product is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or young children of any age, They must be supervised

product by a person responsible for their safety.

• Batteries from the remote control must be only removed by an adult, the adult must

ensure to keep them out of reach of infants and children. Seek medical attention

immediately if a child has swallowed a battery.

• To maintain the product do not use any chemical or cleaning agent or wet cloth, please

only ensure to utilize a dry cloth to wipe it down from marks or dust and only after

unplugging the product from the power socket.

• Please ensure to contact our call center for any repair or service required for the products.

Please make sure upon positioning this product, the place is:

• Not wet or damp and Well ventilated

• Away from direct sunlight or heaters.

• Away from splashes or food.

• Protected from excessive dust or grease.

• Do not place this equipment in a conﬁned space such as a bookcase or similar unit. Allow

20cm above and 5cm spacing on both sides for proper ventilation.

• Do not place the Soundbar near heat sources such as radiators, stoves or other audio

visual equipment that produce heat.

• Do not place containers with liquids, if liquid falls inside the products it may result in

short-circuit, ﬁre or electric shock.

• Do not place small metallic objects on top of the unit.

• Do not use or store ﬂammable or combustible materials near the unit. Doing so may

result in ﬁre or explosion. Do not place any naked ﬂame sources, such as lit candles,

cigarettes or incense sticks on top of the soundbar.

REMOTE CONTROL

• The remote control has a reception range of approximately 5m. Be sure to point

the remote control directly at the sensor at the front of the soundbar.

• Make sure there are no obstacles in the way. This will intefere with the sensor strength.

• Handle the remote control carefully, please do not drop, apply shock or step on it.

• Do not spill water on it.

• Using the remote control while operating other remote controls which use infra-red

rays near the unit as this will cause it to operate incorrectly.

• If you do not intend to use the remote control for a period of a month, remove the remote

control to prevent battery leakage or corrosion.

INPUT

SELECTION

MUTE/UNMUTE

VOLUME DOWN

INCREASE

BASS

DECREASE

BASS

DECREASE

TREBLE

INCREASE

TREBLE

VOLUME UP

PLAY / PAUSE

SONG

POWER ON

PAIRING MODE/

SURROUND SOUND

(refer to below notes)

EQ MODES

3D EQ MODE

Play/Pause, Previous and Next buttons only work in USB or Bluetooth mode.

Press and Hold Play/Pause for 2 seconds to RESET device to factory settings.

PAIR BUTTON:

LONG PRESS - Press and hold for 2 seconds to disconnect or connect last used device.

SHORT PRESS - SURROUND SOUND On/O - This will show ON or OFF on Display of the

soundbar.

CAUTION!

Battery Precautions

• Do not use other batteries other than the one speciﬁed in this manual.

• Danger of explosion if incorrectly replaced by a battery other than the one speciﬁed.

• Do not store battery with other metallic objects, doing so can cause the battery to

short-circuit, leak or explode.

• Ensure the battery is not exposed to excessive heat, direct sunlight or ﬁre.

• Do not try to short-circuit, disassemble or throw the battery into a ﬁre.

• Dispose of batteries promptly and correctly, observing any local hazardous

waste regulations.

To insert new 2 x AAA batteries or replace current batteries, at the back of the remote

control remove the cover of the battery compartment and insert the 2 x AAA batteries

ensuring that the + sign on the battery is facing toward the + sign marked within the

battery compartment.

REMOTE CONTROL (Cont.)

PRODUCT OVERVIEW

1. DISPLAY PANEL

2. STANDBY / ON

3. DECREASE VOLUME

6. AC IN - CONNECT POWER SUPPLY

7. HDMI IN 2 - CONNECT TO HDMI OUT PORT OF YOUR

Set-top box, dvd player, Blu-ray Player, media player.

8. HDMI IN 1 - CONNECT TO HDMI OUT PORT OF YOUR

Set-top box, dvd player, Blu-ray Player, media player.

9. HDMI OUT - CONNECT TO HDMI (ARC) OR HDMI IN ON YOUR TV

10. AUX IN

11. OPTICAL PORT

12. USB PORT / USB MEDIA PLAYBACK

4. INCREASE VOLUME

5. INPUT - SELECT INPUT MODE

FOR SOUNDBAR

4K video

PRODUCT OVERVIEW (Cont.)

1. LED SUBWOOFER INDICATOR

This indicates pairing mode between the soundbar and the subwoofer. Make sure

that the Soundbar and Subwoofer are connect to power supply and powered ON

at the same time.

2. WPS BUTTON

Press this button to automatically pair the Subwoofer with the Soundbar.

Press and HOLD to reset the connection.

3. USB UPDATE

This is only for USB Software Upgrades ONLY.

This will not playback any music media ﬁles from a USB drive.

4. AC IN - POWER

Connect this to the power socket.

PRODUCT PLACEMENT

SOUNDBAR

Please make sure to place Dolby Atmos Soundbar ontop of a TV unit. Not in-

side. Make sure to align it in the centre of the TV

- DO NOT place it inside a TV cabinet, you must allow for airﬂow

and best sound output, you will not be able to fully utilize

Dolby Atmos sound quality while placing it in an enclosed TV unit.

There are speakers at the top of the soundbar.

SUBWOOFER

Place the subwoofer on the left or right side of TV Entertainment Unit as

shown below. Make sure its on a strong stable surface or ﬂoor.

FIRST TIME SETUP WITH SUBWOOFER

To connect Subwoofer and Soundbar successfully

1. Make sure to plug the Soundbar and Subwoofer into Power Socket.

Must let the soundbar and subwoofer connect first before using the soundbar.

2. The Soundbar and Subwoofer will pair automatically, once they have successfully

paired, the indicator light on your subwoofer will remain lit.

Note: if any issues pairing, press the WPS button located at the back of your

subwoofer to reset or commence pairing with soundbar again.

3. You can now commence using soundbar and press the “INPUT” button on

remote control to pick an Input source.

•• The maximum Bluetooth connection distance in an open space between the soundbar

and subwoofer should not exceed 8m.

•• To avoid sound quality interference caused by wireless signal interference, when you

are playing with the soundbar, please ensure it is kept at an appropriate distance

from other Bluetooth devices to avoid wireless signal interference.

•• The flashing blue LED on the subwoofer will turn red if the paired soundbar is turned

off, on STANDBY or not connected to the power. It is indicated that the subwoofer has

also entered into STANDBY mode.

•• If not paired successfully, disconnect the subwoofer and soundbar from each other:

1. Turn off the soundbar and subwoofer by unplugging the AC plug from the socket.

2. Wait 3 minutes before replugging the AC plug into the power socket again.

Ensure the soundbar and subwoofer are connected to the main power at the

same time.

3. Press and hold the subwoofer’s rear panel WPS button to reset the connection,

so that the soundbar and subwoofer can be reconnected again.

CONTROLS AND CONNECTIONS

HDMI

Connect a HDMI cable (not supplied) from your TV HDMI/ARC port to the HDMI socket on

the soundbar. Then change the mode on your soundbar to HDMI ARC Mode.

Note: To enable the Audio Return Channel (ARC) feature, the HDMI must be connected to

an ARC enabled HDMI on your TV. (go to next page for details on ARC).

OPTICAL

Remove protective cap from the Optical socket on the soundbar and plug in the optical

cable (not supplied) from your Soundbar to the TV optical port.

Once connected, change the Mode to OPTICAL from the unit or remote control.

Note: If there is no sound and Optical light is flashing quickly, make sure that the audio

settings on your TV is set to appropriate mode.

This unit may not be able to decode all digital audio formats from the input source. In this

case, the unit will mute. This is NOT a defect. Ensure that the audio setting of the input

source (e.g. TV, game console, DVD player, etc.) is set to PCM or Dolby (Refer to the user

manual of the input source device for its audio setting details) with optical.

IMPORTANT INFORMATION

CONTROLS AND CONNECTIONS (Cont.)

AUDIO RETURN CHANNEL (ARC) / HDMI

ARC function is used for connecting the Soundbar to the TV with a HDMI cable through an

audio return channel. This means you can listen to the TV sounds through your Soundbar via

HDMI cable.

To enjoy the HDMI ARC Mode

1. Make sure the Soundbar is connected to the TV HDMI(ARC) port.

2. Ensure the Soundbar is set to HDMI ARC Mode

3. The sound should relay through the soundbar and you can also adjust the volume of the

sound thats coming through the soundbar with your TV remote control.

Note: If the sound does not automatically produce from the soundbar, TVs may need to be

set onto HDMI (CEC) turned on within the TV settings, with some of them having options to

turn on ARC mode directly.

HDMI PORTS - HOW TO USE

To connect 2 different devices to your soundbar, seperate from getting the

Audio from your TV to soundbar, you can plug in a Media player and a DVD

player to pass through audio and video to your TV with either HDMI IN 1 or

HDMI IN 2 Ports. Then connect the HDMI OUT (ARC) on the Soundbar to

your HDMI (ARC) port to your TV.

Please see below figure connect and set up correctly:

TO WATCH YOUR SET TOP BOX OR DVD PLAYER, PLEASE FOLLOW:

- Change Soundbar INPUT mode to HDMI 1 if the DVD Player is connected

to the HDMI IN 1 Port on your soundbar to then be displayed on your TV.

- Change Soundbar INPUT mode to HDMI 2 if the Set Top Box is connected

to the HDMI IN 2 Port on your soundbar to then be displayed on your TV.

NOTE: HDMI OUT (ARC) must be connected to your TV HDMI (ARC) port in

order to switch between device connected to your soundbar. The HDMI OUT

(ARC) on your soundbar acts as the single cable to passthrough video and

audio to your TV.

GENERAL OPERATION

During On mode, Press the INPUT on the Remote Control repeatedly to

select between:

1. HDMI ARC (out)

2. HDMI 1

3. HDMI 2

4. BLUETOOTH

5. AUX

6. USB

7. OPTICAL

POWER ON / OFF

1. Plug in the power cord into the power outlet and turn on. The

Soundbar will go into standby mode when powered.

2. Switch on the soundbar by pressing the on the unit or RC.

Default input mode will appear after around 10 seconds.

3. Press and hold the button on the RC or unit to power off.

Volume adjustment

Press the Volume +/- button on the remote control to adjust the sound level

to the desire level.

Mute function

When listening to music in any mode, press the mute button on the remote

control to activate the mute function. Press it again or press the volume +/-

button to cancel the mute function.

EQ function

Press the different EQ mode buttons on remote control to toggle among the

different sound effect.

1. EQ 1 - MUSIC

2. EQ 2 - MOVIE

3. EQ 3 - NEWS

4. EQ 4 - 3D

PAIRING YOUR SOUNDBAR

Pairing with a Bluetooth Enabled Device:

Before you play music from your Bluetooth device, it needs to be paired with

the Soundbar.

1. Once powered, press and hold the PAIR button on the remote control to

activate pairing mode.

2. Now that the unit has entered pairing mode, on your smart device, select

to search for Bluetooth devices.

3. Select “KSB212WDA” in the list of devices that appear. The Soundbar will

make a tone once their is a successful connection.

4. To disconnect/unpair the devices switch to another mode on the soundbar

or Disable the Bluetooth on your device /or unpair the Soundbar from your

smart device in settings.

5. Play your favourite music once you are connected.

Note: if prompted on smart device to enter password, please use “ 0000”

NOTES:

• The Bluetooth range between the soundbar and your device is up to

approx. 8 metres. Obstacles may reduce connectivity range.

• This Soundbar may not be compatible with all Blueooth devices.

• With a Weak signal, your Soundbar may disconnect with your device, but it

will continue to stay in Bluetooth mode until signal strengthens.

• If you already have a device connected to the Soundbar, press and hold the

Pairing button for 2 seconds for the unit to go into pairing mode with the

current connection being disconnected.

DOLBY ATMOS

MUST USE A HDMI 2.0 CABLE, OTHERWISE DOLBY ATMOS WILL NOT WORK.

When playing DOLBY ATMOS signals from a Blu-Ray, consoles or others to

the DOLBY ATMOS Soundbar, please follow below:

1. Set the devices audio output to be AUTO or ORIGINAL.

2. Connect these devices HDMI OUT (ARC) to the SOUNDBAR

HDMI IN port.

3. Connect other end of HDMI into the TV HDMI ARC port.

4. By following these steps, you will now be able to control your

Soundbar, Power ON/OFF and control other functions.

- When your Soundbar is in HDMI mode and detects an DOLBY

ATMOS audio format being played, DOLBY ATMOS will display on

the soundbar.

- When DOLBY DIGITAL PLUS audio is detected, the soundbar LED

Display will show DOLBY SURROUND.

IMPORTANT:

- NO SOUND - FLASHING LED LIGHT

In HDMI ARC or Optical Input and there is no sound output from the

unit and the LED indicator light on soundbar is ﬂashing, you may

need to adjust your TV Audio settings to either PCM or Dolby Digital

Signal on your TV.

- This unit may not be able to decode all digital audio formats

from the input source. In this case, the unit will be mute.

This is NOT a defect.

IF YOUR TV DOES NOT SUPPORT DOLBY ATMOS, THEN YOU MUST PLUG

YOUR DOLBY ATMOS SUPPORTED MEDIA PLAYER OR CONSOLE INTO THE

SOUNDBAR DIRECTLY, WITH ONE OF THE HDMI (IN) PORTS.

PLEASE REFER TO PAGE 15 (HDMI PORTS - HOW TO USE)

TROUBLESHOOTING

Never try to repair the soundbar yourself. If you encounter any problems when using this

unit, check the following points before seeking for service.

Problem Solution

No Power • Ensure that the AC Plug is connected to

power socket outlet.

• Ensure that there is power at the AC outlet.

• Press standby button to turn the unit on.

Remote control does

not work

• Before you press any button, ﬁrst select the

correct INPUT mode.

• Reduce the distance between the remote

control and the unit.

• Insert the battery with its polarities (+/-)

aligned as indicated.

• Replace the battery.

• Aim the remote control directly at the sensor

on the front of the unit.

No response from

the unit

• Disconnect and reconnect the AC power

plug, then turn the unit on again.

I can’t ﬁnd the

Bluetooth name

of this unit on my

Bluetooth device for

Bluetooth pairing

• Ensure the Bluetooth function is activated on

your Bluetooth device.

• Ensure you have paired the unit with your

Bluetooth device.

No connection

between the

main unit and the

subwoofer

• Ensure the mains cables of the main unit and

the subwoofer are both connected securely

to the mains power socket.

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth

SIG, Inc. and any use of such marks by Ayonz Pty Ltd is under license. Other trademarks

and trade names are those of their respective owners.

SPECIFICATIONS

Power Supply 100-240V~50/60Hz 180W

Output Power Total: 30W × 2 + 80W + 20W × 2 = 180W R.M.S.

Frequency Response 45Hz-20Khz

Driver Unit 2.25” x 4 + 2” × 2 + 6.5” × 1

Bluetooth 5.0, A2DP, AVRCP

Bluetooth Range Up to 10m

Dimensions Soundbar: 960 (w) x 83 (d) x 73 (h) mm

Subwoofer: 190 (w) x 306 (d) x 370 (h) mm

Page is loading ...

EKO KSB212WDA User manual

EKO KSB212WDA User manual

Related papers

Other documents