morse 310-a User manual

Hello! I have analyzed the Declaration of Conformity for the MORSE Air Power Tilt-To-Load Drum Tumbler, model 310-A. This document confirms that the product adheres to the 2006/42/EC Machinery Directive and EN 60204 Safety of Machinery standard. I am ready to answer any questions about its compliance and specifications mentioned in this document.
What is the product certified in this document?

Which Machinery Directive does this product comply with?

Which safety standard does this product comply with?

The Specialist In Drum Handling Equipment

CE Declaration of Conformity

Model 310-A Air Power Drum Tumbler

Syracuse, NY, 13208 U.S.A.

morsedrum.com (315) 437-8475

CE Declaration of Conformity

This product has been tested to the current appropriate standards

and is in compliance with the following

-------------------------------------------------------------------

Machinery Directive: 2006/42/EC

Standard: EN 60204 Safety of Machinery

-------------------------------------------------------------------

Manufacturer’s Name: MORSE Mfg. Co., Inc.

Manufacturer’s Address: 103 Kuhn Rd.

Syracuse, NY 13208

Product: Air Power Tilt-To-Load Drum Tumbler

Model: 310-A

Serial Number: 400000 and up

-------------------------------------------------------------------

This Certicate of Compliance issued 2022 is valid for the test sample of the product specied

above and that it conforms to the Directive(s) and Standard(s).

Signature:

Nathan Andrews

President

Morse Manufacturing Company, Inc.

103 Kuhn Rd.

Syracuse, New York, USA 13208

Phone: (315)-437-8475

Fax: (315)-437-1029