SMATE SM2SB5.1TH150KINMA User manual

Type
User manual
MODEL NO.:SM2SB5.1TH150KINMA
Note:Please read the instructions carefully before operating
the set and retain it for further reference.
SMATE Theatre Series Soundbar
USER MANUAL
Content
Safety Precautions ------------------------------------------------------------ 01
Important Safeguards -------------------------------------------------------- 02
Specication -------------------------------------------------------------------- 03
Power Switch ------------------------------------------------------------------- 04
Front Control Panel ------------------------------------------------------------ 04
Remote control ----------------------------------------------------------------- 05
Amplied board ---------------------------------------------------------------- 06
USB Operation ------------------------------------------------------------------ 06
Bluetooth Operation ---------------------------------------------------------- 07
Aux Operation ------------------------------------------------------------------ 08
Subwoofer Output Operation ---------------------------------------------- 09
5.1CH/AC-3 Operation ------------------------------------------------------- 10
Wired Mic Operation ---------------------------------------------------------- 11
Optical Operation ------------------------------------------------------------- 12
Coaxial Operation ------------------------------------------------------------- 13
HDMI Operation --------------------------------------------------------------- 14
Installation Steps -------------------------------------------------------------- 15
Accessories ---------------------------------------------------------------------- 16
Trouble Shooting -------------------------------------------------------------- 16
Installing Batteries to the Remote Control ------------------------------ 17
Support -------------------------------------------------------------------------- 18
01
Safety Precautions
A. Please do not open the back cover or the soundbar
cover. The lighting flash symbol is to alert the user to
the presence of uninsulated "dangerous voltage"
within product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
Please refer to qualified service personnel with any
issues.
B. Please protect the power cord and plug. Avoid high
pressure, force, pulling or pushing of the power cord/plug.
C. The product is designed for indoor use only.
Please do not place the product in windy, sunny or heat
emitting surrounds. Please do not place the product in a
sealed box without any ventilation. Ventilation is required
for preventing excessive heat and any damage to the
unit from it.
D. Slots and openings in the unit cabinet are provided for
ventilation and to ensure reliable operation of the product
preventing any damage from excessive heating.
The openings should never be blocked.
E. To prevent fire or shock hazards do not expose the
apparatus to rain or liquids or any external materials.
No filling of external substances should be allowed at
anytime.
F. The product is designed to Australian Standards for
operation and safety. Please ensure the input voltage is
AC 240V/50Hz. If you are unsure about the power supply
please consult your dealer or local power company.
02
Important Safeguards
01. Read Instructions-All the safety and operating instructions should be read before the
appliance is operated.
02. Read Instructions-All the safety and operating instructions should be retained for future
reference.
03. Follow Instructions-All operating instructions should be followed.
04. Heed Warning-All warnings on the appliance and in the operating instructions should
be adhered to.
05. Power Source-The appliance should be connected to power supply for only the type
specified in the operating instruction or as marked on the appliance.
06. Power Cord Protection-Power supply cords should be routed such that they are not likely
to be walked on or pinched by items placed upon or against them. Pay particular attention to
cords at plugs, convenience receptacles and the point where they exit from the appliance.
07. Water and Moisture - The appliance should not be exposed to water, rain or moisture to
prevent fire or shock hazards. No filling of liquids should be allowed at anytime.
08. Ventilation-The appliance should be situated so that its location or position does not interfere
with its proper ventilation.Do not use the appliance on a bed,sofa,rug or similar surface that
may block the ventilation openings.
09. Heat-Keep the appliance away from heat sources such as radiators, heat registers,stoves,
or other appliances (including amplifiers) that produce heat.
10. Non-use Periods-The power cord of the appliance should be unplugged from the outlet
when left unused for a long period of time.
11. Damage Requiring Service-The appliance should be serviced by qualified service personnel
only when:
a. The power-supply cord or plug has been damaged.
b. Objects have fallen or liquid has been spilled into the appliance.
c. The appliance has been exposed to rain.
d. The appliance does not appear to operate normally or exhibits a marked change in
performance.
e. The appliance has been dropped , or the enclosure damaged.
12. Servicing-The user should not attempt to service the appliance beyond that specified in the
operating instruction.All other servicing should be referred to qualified service personnel.
13. Clean only with dry cloth.
14. Unplug this apparatus during lightning storms or when unused for long period of time.
Specification
Rated Power:150W(20Wx5+50W)
Input Voltage:AC 110-240V 50/60Hz
S/N RATIO:>86dB
THD(1KHZ,1W):<0.1%
Sensitivity:88dB
Speaker Drivers:
FR/FL:(3"x2+1")x2
CEN: 3"x2+1"
SR/SL: (3"x2 )x2
SUB: 5.25"x2
Frequency response:85Hz~20KHz (40Hz-250Hz for sub)
Product size:1098x236x165mm
03
The soundbar is designed with patented technology:
With patented loudspeaker phase control technology, SMATE sound bar subwoofer is designed
to operate at low-frequency which produces punchy bass. The centre and front loudspeaker are
designed to operate on full-frequency range which produces the centre and front channel sounds.
The surround sound loudspeaker is designed to operate on full-frequency ranges and its phase
control crossover to the centre & front phase control enhances the surround sound effect.
Meanwhile the soundbar built-in controller and audio control circuit board is designed so all the
functions can be controlled by the front panel or remote control.
This product complies to AS/NZS, CE & RoHS standards
Power Switch
Front Control Panel
04
1. LED display
2. Remote Control Receiver
3. USB Input
4. Master Volume-
5. Power (Standby/On)
6. MENU (Control each channel
volume separately)
7. Previous channel/ previous song
8. Memory indicator (for pre-setting the volume level)
9. Master Volume+
10. INPUT(Change input signal sources)
11. Next channel/ next song
12. Play/Pause
The soundbar power switch is located under the
LED display panel as shown in the picture above.
When turned on the display will light up automatically.
**
OFFON
Remote control
05
1. STANDBY
2. CH.MODE(2.1ch/5.1ch mode)
3. MASTER VOLUME+
4. PREVIOUS CHANNEL-
5. MASTER VOLUME-
6. SURROUND VOLUME-
7. CENTER VOLUME-
8. SUBWOOFER VOLUME-
9. MIC VOLUME-
10. MEMORY
11. INPUT(change input signal sources)
12. NEXT CHANNEL+
13. PLAY/PAUSE
14. SURROUND VOLUME+
15. CENTER VOLUME+
16. SUBWOOFER VOLUME+
17. MUTE
18. MIC VOLUME+
19. MIC VOLUME SETTINGS(set up echo or volume)
Amplified board
01. HDMI Output
02. HDMI 2 Input
03. HDMI 1 Input
04. Active Subwoofer Ouput
05. AUX Input
06. AC-3/5.1CH Input
08 09 10 11
04 05 06030201 07
07. Power Input
08. MIC 1 Input
09. MIC 2 Input
10. OPTICAL Input
11. COAXIAL Input
06
USB Operation
USB Ports
1. Turn on the power switch
2. Select USB function by pressing the "INPUT" button
3. Plug the USB flash drive to the USB port
4. The USB mode supports most mainstream audio file formats
like MP3/ WMA/ APE/ FLAC
Bluetooth Operation
Mobile Phone iPad
07
1. Select the input to "Bluetooth" mode
2. Enable bluetooth mode on your device and search for bluetooth
device "KINMA9" and select for connection
3. No password is required for connection
4. A beep sound from the soundbar will confirm the device is connected successfully
5. You may now listen to your preferred content/music from your device
Aux Operation
2 RCA to 2 RCA cable audio cable
3.5mm/2 rca cable audio cable
08
1. Connect your device with the soundbar via RCA cable as per any of the
two methods shown above in the picture
2. Change "input" to "AUX"
3. Adjust volume for each channel separately
Subwoofer Output Operation
09
1. Connect active subwoofer input to the soundbar SW OUT port via RCA
cable as per the connection diagram shown above
5.1CH/AC-3 Operation
10
1. Connect your device with the soundbar by RCA cable as per the
picture shown above
2. Change "input" to "5.1"
3. Adjust the volume for each channel separately
Wired Mic Operation
6.5mm Wired Microphone
Wireless Microphone receiver
MIC input jack
11
Optical Operation
Player device
Optical audio signal cable
12
1. Connect your device with Optical cable to the ports marked OPTICAL
as per above picture
2. Change "input" to "OPT"
3. Adjust the volume for each channel separately
Coaxial Operation
Player device
Coaxial audio signal cable
13
1. Connect your device with Coaxial cable to the ports marked COAXIAL
as per above picture
2. Change "input" to "COAX"
3. Adjust the volume for each channel separately
HDMI Operation
HDMI INPUT
HDMI OUTPUT
TV HD Player
14
1. Connect your device with HDMI cable as per above picture to external device or TV
2. Change "input" to "ARC”
3. Adjust the volume for each channel separately
Please note:
1) Connect a suitable ARC enabled HDMI cable to ARC enable HDMI port on your TV. Please
turn on/enable the ARC function on your TV
2) When connecting other HDMI devices to the soundbar input, please select relevant source
HDMI from TV (which is connected to the soundbar) and change soundbar input to relevant
HDMI source (HDMI 1/2)
3) Depending on your TV model & settings you may find all sound defaults to the soundbar and
you may or may not be able to use TV remote control for controlling the sound. Use soundbar
remote for controlling the sound, if all sound defaults to the soundbar and TV remote is not
usable for controlling sound.
Installation Steps
15
There are two options for installation of the soundbar unit as per below.
Option 1: Mounting on the wall
Option 2: Installing on a TV stand/ Entertainment unit
Wall mounting installation steps:
1. Mark mounting distance appropriately on the wall
2. Drill the holes & fix the mounting bracket (as supplied to the wall)
3. Screw the mounting plate to the soundbar (if not pre-tted)
4. Mount the soundbar to the installed brackets on the wall
Note: Please ensure its a two person lift to prevent any injury or harm to
yourself or damage to the soundbar
Please contact us at support@smate.com.au for professional installation
of your soundbar ensuring best audio experience
Accessories
16
Trouble Shooting
PROBLEM
NO POWER
No Sound
The remote control
doesn't working properly
MODIFIED METHODS
Check whether the power cord is loose or not
Check whether the socket is working or not
Check”INPUT”signal source
The remote control is too far away from the speaker.
Operating the remote control within 7m
There is am obstacle between speaker and
remote control.Remove obstacle
The battery of remote control runs out.
Replace this with new battery
1. Manual x1
2. RCA cables x2
3. Optical cable x1
4. HDMI cable x1
5. Remote Control x1
6. Power Cord x1
7. Screws x1 set
Installing Batteries to the Remote Control
Please insert AAA batteries into the remote control. Make sure the (+) side and the (-) side are
installed correctly. When you are installing the battery, the remote's backside should be facing up.
After installing the batteries correctly, please re-attach the battery cover.
17
Please note:
* Only use AAA batteries.
* Inserting the batteries incorrectly may
also result in cracking or leakage that may
pose a ire risk or lead to personal injury.
* Dispose the batteries in accordance with
local laws and regulations.
* Keep the batteries away from children
and pets.
* If the remote control is not used for a long
time, remove the batteries.
* Keep the remote control away from
moisture, sunlight, and high temperatures.
Using the Remote Control
* To use the remote control, point it towards the remote sensor at the front of the soundbar.
* The remote control has a range of up to approximately five metres (7m) from the soundbar
at an angle of up to 30 degrees each to the right and left of the sensor.
* The remote control will not operate if its path is blocked.
NOTE:
* Do not drop, step on or otherwise impact the remote control as this may damage the parts or
lead to a malfunction.
* The operating distance may vary according to the brightness of the room.
* Do not point bright lights at the remote control sensor.
* Do not place objects between the remote control and the remote control sensor.
* Do not use this remote control while simultaneously operating a remote control of other devices.
Remote Control Preparation
* Install the batteries in the back of the remote control, ensuring to match up the polarity markings (+/-).
* The batteries should last for around one year. The service life of the batteries will depend on
how often they are used.
* If the remote control does not work when operated near the soundbar, replace the batteries.
NOTE:
* Remove the batteries if the remote control is not going to be used for a long time.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

SMATE SM2SB5.1TH150KINMA User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI