2. Baxton Studio
  3. CS003C-Walnut/Light Grey-5PC Dining Set

Baxton Studio CS003C-Walnut/Light Grey-5PC Dining Set, CS003C-Black/Cream-5PC Dining Set, CS003C-Natural Oak/Light Grey-5PC Dining Set Assembly Instructions

  • Hello! I'm a chat assistant specialized in helping you with assembly instructions. I've reviewed the provided document for the CS003C dining chair, which includes detailed parts lists, hardware lists and step-by-step instructions. I'm ready to answer your questions about the assembly process, including steps for attaching legs, the seat, the back, and securing the corner blocks.
  • What should I do when assembling the chair?
    What should I avoid during assembly?
    Where should I keep hardware parts?
1. Do not FULLY-TIGHTEN the nut or nut bolt until all nut
or bolt is ready assembled.
2. Do not OVER-TIGHTEN the nut or nut bolt to avoid
causing damages to the thread.
3. Keep all hardware part out of reach of children.
PRODUCT CODE : CS003C DINING CHAIR
Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all
part is complete, before you assemble. Place all wooden furniture part on a clean and flat soft
surface to prevent from being scratched. Follow the figure to start assembling.
CAUTIONS : 6 PCS
1 PC
CUSHION SEAT 3
1 PC
C
SPRING WASHER 1/4"
ALLEN KEY (M4) LONG
5
4
ASSEMBLY INSTRUCTIONS
ITEM DESCRIPTION
PART LIST
ASIDE LEG FRAME - L & R JCBC SCREW M6 x 50MM
QTY ITEM
2 PCS 1
2
HARWARE LIST
DESCRIPTION QTY
10 PCS
CSK SCREW M4 x 25MM 8 PCS
CORNER BLOCK 4 PCS
D
COMPLETED CHAIR ASSEMBLY
CAP FRAME
B1 PC
4 PCS
JCBC SCREW M6 x 30MM
64 PCS
WOOD BUTTON Ø14.5 x 9MM
Step 1 :
C
2
1
3
Step 2 :
6x
Step 3 :
Step 4 :
2
5
3
4x
4x
6
8x
D
4
B
A
FRONT
BACK
ASSEMBLY INSTRUCTIONS
MODEL : SHERWIN TABLE
CAUTION:
1. Do Not FULLY - TIGHTEN the nut or screw until all is ready to assemble.
2. Do Not OVER - TIGHTEN the nut or screw to avoid causing damages to the tread.
3. Keep all hardware part out reach of children.
Part List
No. Description Qty
A
B
Table Top
Leg
1 pc
4 pcs
Hardware List
No. Description Qty
1
2
3
4
JCBC M6 x 80mm
Spring Washer M6
Flat Washer M6 x 19mm
Allen Key M4 x 110mm
8 pcs
8 pcs
1 pc
SCREWDRIVER
NOT INCLUDE
x 2 People
Step 1
8 pcs
321
4
A
B
Read this instruction carefully. Remove all wrapping material, staples and straps from the carton. See hardware and furniture part list for guidance.
Be sure you have all parts before you start assembling. Place all wooden furniture parts on a clean and flat soft surface, such as a carpet or rug, to prevent from being scratched.
/