3M Fibre Disc 782C, 115 mm x 22 mm, 60+, Slotted User manual

3M
Brand
3M
Model
Fibre Disc 782C, 115 mm x 22 mm, 60+, Slotted
Type
User manual
Page 1 of 2
782C Fibre Disc
Product Data Sheet
Date 02/2020
Supersedes: NEW
3M I.D. Number
782C
Product
Description
3M 782C fibre discs are designed for all applications typical of such abrasives,
including but not limited to beveling, weld grinding, weld preparation, and general
sanding/grinding where the edge of the disc is not used. The primary substrate for this
product is mild (carbon) steel.
Mineral
3M-Proprietary Ceramic Precision Shaped Grain (PSG)
Grades
36+, 60+, 80+
Bond
Resin Bond
Backing
Vulcanized fiber
Available Forms
Dimensions
Discs various sizes
Identification
All relevant product identification information can be found on the product
label or on the box in which the product was received or on the with the product
supplied Safety Instruction Leaflet.
Storage
Store at 16 °C – 26 °C and 35-50 % relative humidity in its original box on “first-in -
first-out” cycle.
Note: The shelf life may be shortened if the original packaging is not properly sealed
or stored in an environment with high temperatures or humidity.
Precautionary
Information
Refer to Product Label and Safety Instruction Leaflet for health and safety information
before using the product.
This product should be used on guarded tools with the 3M recommended backup
pad. The backup pad should not be trimmed as injury may result.
For information please contact your local 3M Office.
www.3M.com
For Additional
Information
To request additional product information or to arrange for sales assistance, call your
local 3M Application Engineering.
Product Name
Date
Page 2 of 2
For Additional Information
3M is a trademark of the 3M Company.
Important Notice
All statements, technical information and recommendations contained in this
document are based upon tests or experience that 3M believes are reliable. However,
many factors beyond 3M’s control can affect the use and performance of a 3M
product in a particular application, including the conditions under which the product is
used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is
essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for the user’s method or application. All questions of
liability relating to this product are governed by the terms of the sale subject, where
applicable, to the prevailing law
Values presented have been determined by standard test methods and are average values not to be used for
specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but
we would ask that you conduct your own tests to determine their suitability for your applications. This is because 3M
cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our
recommendations
3M UK Limited
3M Abrasive Systems Division
3M Centre
Cain Road
Bracknell
RG12 8HT
Tel: 08705 360036
abrasives.uk@mmm.com
3M.co.uk/metalworking
3M Denmark a/s
3M Abrasive Systems Division
Afd. Industri Hannemanns Allé 53
2300 København S
Telefon 43 48 01 00
www.3M.dk
3M Finland Suomen 3M oy
3M Abrasive Systems Division
Keilaranta 6 PL
600 02151 Espoo
Puh: 09 525 21
www.3M.fi
3M Norge AS
3M Abrasive Systems Division
Avd. Industri Postboks 100 2026
Skjetten
Tel: 0 63 84
www.3M.no
3M Latvija
3M Abrasive Systems Division
K. Ulmaņa gatve 5
Rīga, LV-1004
Telefons +371 67 066 120
www.3M.lv
3M Lietuva,
3M Abrasive Systems Division
UAB A. Goštauto g. 40A
LT-03163, Vilnius
Lietuva
Tel. +370 5 2160 119
www.3M.lt
  • Page 1 1
  • Page 2 2

3M Fibre Disc 782C, 115 mm x 22 mm, 60+, Slotted User manual

3M
Brand
3M
Model
Fibre Disc 782C, 115 mm x 22 mm, 60+, Slotted
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents