Page is loading ...
WC-7777-CAB
INSTALLATION-GUIDE
Prior to installation please check received
items against the "Packing List".
Please report any missing items to your
retailer immediately. Professional installation recommended.
Protect all surfaces from sharp objects,
high heat sources,direct prolonged
sunlight and chemical hazards.
Cabinet Screw x 4 Washer x 4 Screw cover x 4 Stud Bolt x 4
PACKING LIST
Electric drill Tape measure Drill bit Pencil Screwdriver Hammer
(5/16 in.)
REQUIRED TOOLS NOT IN BOX
INSTALLATION INSTRUCTIONS
X
Diameter 5/16 in.
Depth 1-1/2 in.
Drill holes
(top and bottom)
Measure positions on wall to reflect predrilled
holes located inside of cabinet (top and bottom)
After holes are drilled, hammer in the stud
bolts into the holes. Then line up cabinet to
match the predrilled holes on back of cabinet.
Put screws into the washer through the
cabinet holes and tighten with screwdriver
till cabinet is secure to the wall.
Draw horizontal line
1 32
(1)
(2)
/
