Whirlpool WBE 34362 IX User guide

Type
User guide

This manual is also suitable for

Refrigerator Compartment
1. Fan*
1a. ON/OFF fan button switch
1b. cover of fan
2. Electronic control panel / light unit
3. Bottle holder*
4. Shelves / Shelf area
5. Cooler Compartment (best for meat and fish)*
6. Rating plate with commercial name
7. Fruits and vegetables crisper
8. Crisper divider*
9. Reversibility kit
10. Egg tray*
11. Bottle holder*
12. Door trays
13. Eggs balconies*
14. Door seals
Freezer Compartment
14. Door seals
15. Upper basket for freezing fresh food or to store
frozen food
15a. "Eco green" basket for freezing fresh food or to
store frozen food
16. Storage zone for frozen food items
17. Ice tray*
Anti-bacterial protection:
- Antibacterial filter* in the fan (1)
- Antibacterial additives* in the material of Crisper (7)
- Door seals are made of material able to inhibit bacterial
growth (14).
* Available on selected models
Notes:
- All shelves and door trays are removable.
- The internal temperatures of the appliance may be
affected by the ambient temperature, frequency of door
opening, as well as location of the appliance.
Temperature setting should take into consideration
these factors.
- The appliance accessories are not dishwasher safe.
- After inserting food, ensure that the freezer
compartment door closes properly.
HOW TO INCREASE FREEZER STORAGE
CAPACITY
You can increase storage capacity in the freezer
compartment by :
- removing the baskets to allow the storage of big
products.
- placing the food products directly on the freezer
shelves.
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the
operation automatically. After starting the appliance, wait
at least 4-6 hours before placing food into the appliance.
When the appliance is connected to the power supply, the
display lights up and all the icons appear on the display for
approximately 1 second.
The default (factory) values of the freezer and refrigerator
compartments settings light-up.
Note: If food is placed in the refrigerator before it has
cooled completely, it may deteriorate.
FAN
The fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food.
By default, the fan is switched on.
It is advisable to keep the fan switched on, so that the "6th
Sense"/ "Green Intelligence" function can work properly
and also when the ambient air temperature is above 27 ÷
28°C or if you notice drops of water on the glass shelves
or in sever humidity conditions.
Please note that when the fan is switched on it will not
continuously work. The fan will start/stop working
depending on the temperature and/or humidity level
inside the fridge.
It is therefore absolutely normal if the fan does not move
even if the fan is switched on.
Note:
Do not obstruct the air intake area with food items.
To guarantee the right performance at lower ambient
temperature (colder than 18°C) and to minimize Energy
Consumption, turn off the fan.
To turn off the fan press the button (1a).
If the appliance has the fan it can be equipped with the
antibacterial filter.
Remove it from the box found in the crisper drawer (7)
and insert into the cover of fan (1b).
The replacement procedure is attached with the filter.
PRODUCT SHEET
GB
D GB F NL E P I GR S N DK FIN PL CZ SK H
RUS
BG RO
UKR
CA
ELECTRONIC CONTROL PANEL
A. Indicator LEDs to display the current temperature
setpoint or the Fast Cool function
B. Pushbutton for Temperature setting (short pressure) or
Fast Cool activation (long pressure – 3 sec.)
TEMPERATURE SETTING
Press the Temperature button (B) on the control panel to
adjust the temperature from the warmest through the lower
to the coldest level.
Pressing the Temperature button, the temperature setting
will change cyclically.
The temperature setting works for both the refrigerator and
the freezer compartments at the same time. At first plug-in
of appliance temperature setpoint is present at medium
position (factory setting).
Following table shows temperature setpoints:
Legend: Led ON Led OFF
FUNCTIONS
Fast Cool
The use of the Fast Cool function is recommended:
- to increase the cooling speed of the refrigerator
compartment when placing a very high quantity of food
within it,
- to maximize the freezing capacity of the freezer
compartment: for this reason you should activate the
Fast Cool function before placing fresh food to be
frozen in the freezer compartment.
To activate the Fast Cool function, press and hold for 3
seconds the pushbutton on the control panel: all the 3
LEDs on the control panel will turn on.
The function is automatically deactivated after 24 hours.
The function can be manually deactivated by pressing
and holding the same pushbutton on the control panel
for 3 seconds.
/ "6th Sense" / "Green Intelligence"
The "6th Sense "/ "Green Intelligence" function is
automatically activated when:
• a large amount of food is loaded into the refrigerator
and/or freezer
• the refrigerator and/or freezer door is left open for a
long time
• a prolonged power failure takes place, causing the
internal temperature of the appliance to increase to
values that cannot guarantee safe storage of food.
ECO GREEN (depending on the model)
This function gives best food preservation performance
with the smallest energy consumption possible if there is
a lower amount of food to be preserved in the appliance.
When ECO GREEN function is activated only these
compartments should be used in order to have the best
food preservation:
- 2 "eco green" areas in the fridge ( indicated by green
stickers)
- 1 "eco green" basket for storing frozen food (item 15a)
in freezer compartment.
To active the Eco Green function press the pushbutton
on the control panel to choose the mid-high
temperature, as showed here below:
FREEZING FRESH FOOD
Before placing fresh food to be frozen in the freezer
compartment you should activate the Fast Cool function.
Place the fresh food to be frozen on the freezer shelves in
freezer compartment.
Avoid direct contact with already frozen food.
Place the fresh food just after activation of Fast Cool. After
24h from activation, function will turn off automatically.
ABNORMAL APPLIANCE OPERATION
When any failure appears, any LEDs start blinking, it is
necessary to call service.
The appliance will work preserving the food stored.
Note: In case of power failure, appliance goes back to
normal operation and previously chosen temperature
setpoint is restored.
CLEANING
Important: Before carrying out any cleaning or maintenance
operation, unplug the appliance or disconnect it from the
high temp.
med-high temp.
medium temp.
med-low temp.
low temp.
CA
UKR
ROBG
RUS
HSKCZPLFINDKNSGRIPENLFGBD
PRODUCT SHEET
GB
power supply.
Regularly clean the appliance using a cloth and a solution of
warm water, with some soft detergent suitable for cleaning
the inside of the refrigerator compartment.
Do not use abrasive detergents or tools.
To ensure continuous and correct flow of defrost water,
regularly clean the inside of the draining hole on the back of
the refrigerator near the fruit and vegetable drawer, using the
tool provided.
NO-FROST REFRIGERATOR COMPARTMENT
Refrigerator compartment defrosting is completely
automatic.
Droplets of water on the rear wall inside the refrigerator
compartment indicate that the automatic defrost phase is in
progress. The defrost water is automatically run into a drain
hole and collected in a container, where it evaporates.
DEFROSTING THE FREEZER COMPARTMENT
The freezer should be defrosted once or twice a year or
when excessive frost is present (3 mm thickness). The thin
formation of frost is normal.
Before defrosting the freezer compartment unplug the
appliance or disconnect it from the power supply.
Defrosting the freezer compartment should be done
manually by open the door till the all of ice will be melted.
During defrosting process please wipe the compartment with
a rag to avoid water penetration into the product. Before
restarting the product make sure that compartment is fully
dry.
LED LIGHT SYSTEM
The light system inside the refrigerator compartment uses
LEDs light, allowing a better lightning as well as a very low
energy consumption.
If the LED light system does not work, please contact the
Service to replace it.
PRODUCT SHEET
GB
CA
UKR
ROBG
RUS
HSKCZPLFINDKNSGRIPENLFGBD
5019 620 00022 Printed in Poland 03/13
5019 620 00022 Printed in Poland 03/13
D GB F NL E P I GR S N DK FIN PL CZ SK H
RUS
BG RO
UKR
CA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Whirlpool WBE 34362 IX User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI