2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical controls
  5. Electrical timers
  6. Stairmaster
  7. AirFit

Stairmaster AirFit, AirFit G2, AirFit UB 9-4570, Turbo Trainer Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Stairmaster AirFit Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Manual
Page 1
637-4261 Rev. B
Latest Rev.
This document details the operation and options on the Stairmaster Airt, Airt UB, and
Star Trac Turbo Trainer consoles.
Start Timer and Data Tracking Push any button to turn on the console, and the
timer will start automatically.
Pause Timer and Data Tracking Press the Start/Pause button. Press it again to
re-start the workout.
Reset Timer and Data Values Press the Start/Pause button for 5 seconds
Select Metric or Standard Units Press and hold Shift (round button with arrows)
for 5 seconds or until the active units setting
beings to blink. Press and hold the Shift button
again for 5 seconds to select the unit type. If no
button is pressed for 20 seconds when in unit
selection mode, the console will go back to the
main workout screen and use the last selected
unit type.
Set console for machine model type. The same console can be used for the Airt Up-
per Body Ergometer, the Airt Bike, and the Tur-
bo Trainer. To change between the two machine
model types, press and hold the Start/Pause and
Shift buttons at the same time for 5 seconds or
until the model selection screen is displayed. on
the model selection screen, use the Shift button
to select either 3700 (Airt Bike and Turbo Train-
er) or 3701 (Airt UB).
Airt and Turbo Trainer Console Operation
Applies to: Airt (160002 / 160003) + Airt UB (9-4570) + Turbo Trainer (9-4550)
/