Robert Juliat SULLY T/650DSX4C User manual

Brand
Robert Juliat
Model
SULLY T/650DSX4C
Category
Stroboscopes & disco lights
Type
User manual
REF Standard North American
28 - 54° 653SX 4C 653CSX 4C
16 - 35° 654SX 4C 654CSX 4C
11 - 26° 651SX 4C 651CSX 4C
Robert Juliat S.A.S. 32, rue de Beaumont, F 60530 Fresnoy-en-Thelle - phone : +33 (0)3 44 26 51 89 - [email protected]
www.robertjuliat.com
DN41222400 (EN)
4-COLOUR LED PROFILE SPOT
200 W LED
VALIDATION : 17/05/23
V2
- FIRMWARE: V2.xx
Manual
Robert Juliat reserve the right to change or alter any of the items detailed on this page, to increase or improve manufacturing techniques without prior notice.
1 User’s instructions ...............................................................................................................1
2 Presentation ........................................................................................................................2
2.1 Functions ...................................................................................................................2
2.2 Identication labels .................................................................................................2
2.2.1 Label on LED compartment ............................................................................2
2.2.2 Label on lighting unit .......................................................................................3
2.3 Accessories included ................................................................................................3
2.4 Accessories ................................................................................................................4
3 Set-up ...................................................................................................................................5
3.1 Mechanics .................................................................................................................5
3.1.1 Operating positions .........................................................................................5
3.1.2 Minimum distance between a ammable material and the lighting unit ... 5
3.1.3 Instructions for use ...........................................................................................5
3.1.4 Hanging ............................................................................................................ 5
3.1.5 Safety cable .....................................................................................................6
3.2 Electrical information ..............................................................................................6
3.2.1 LED source .......................................................................................................6
3.2.2 Power supply ....................................................................................................6
3.3 DATA ...........................................................................................................................7
3.3.1 DMX 512-A / RDM ............................................................................................7
3.4 Accessories ................................................................................................................8
3.4.1 Front lter holder .............................................................................................8
3.4.2 Double-condenser set ...................................................................................... 8
3.4.3 Internal lter holder ........................................................................................9
3.4.4 Gobo holder / Iris .............................................................................................. 9
3.4.5 Shutters ...........................................................................................................10
4 Operations .........................................................................................................................11
4.1 Source type ............................................................................................................. 11
4.1.1 Range .............................................................................................................11
4.1.2 Control ...........................................................................................................11
4.2 Light intensity ........................................................................................................ 12
4.2.1 Range .............................................................................................................12
4.2.2 Control ...........................................................................................................12
4.2.3 Parameters .................................................................................................................12
4.2.3.1 Dimming resolution - DMX only .......................................................12
4.2.3.2 Dimming curve ...................................................................................12
4.2.3.3 Dimming mode ...................................................................................13
4.2.3.4 Response time .....................................................................................13
4.2.3.5 DimShift .............................................................................................13
4.3 Colour mix .............................................................................................................. 14
4.3.1 Range ..............................................................................................................14
4.3.2 Control ............................................................................................................15
4.3.3 Parameters .....................................................................................................16
4.3.3.1 Colour space selection ................................................................................16
4.3.3.2 High Quality / High Brightness ..........................................................17
4.4 Colour Temperature CCT....................................................................................... 17
4.4.1 Range .............................................................................................................17
4.4.2 Control ...........................................................................................................18
4.4.3 Parameters .....................................................................................................18
4.4.3.1 High Brightness / High Quality .................................................................18
4.4.3.2 DimShift .........................................................................................................18
4.5 High Brightness / High Quality ............................................................................ 18
4.5.1 Range .............................................................................................................18
4.5.2 Control ............................................................................................................18
4.6 Colour lters ........................................................................................................... 19
4.6.1 Range ..............................................................................................................19
4.6.2 Control ...........................................................................................................19
4.6.3 Parameters .....................................................................................................20
4.6.3.1 Saturation ..........................................................................................20
4.6.3.2 Transmission .......................................................................................20
4.6.3.3 Gel Fade Time and Mode ...................................................................21
4.7 Strobe...................................................................................................................... 22
4.7.1 Range .............................................................................................................22
4.7.2 Control ...........................................................................................................22
4.8 Response time ....................................................................................................... 22
4.8.1 Range .............................................................................................................22
4.8.2 Control ............................................................................................................22
4.9 DimShift .................................................................................................................. 23
4.9.1 Range .............................................................................................................23
4.9.2 Control ...........................................................................................................24
4.10 Beam size adjustment ........................................................................................ 24
4.10.1 Range ...........................................................................................................24
4.10.2 Control ..........................................................................................................24
4.11 Orientation ............................................................................................................ 25
4.11.1 Range ............................................................................................................ 25
4.11.2 Control ..........................................................................................................25
4.12 Colour and diuser lters (gels) ..........................................................................25
4.13 Beam shaping ....................................................................................................... 26
4.13.1 Range ............................................................................................................ 26
4.13.2 Control ..........................................................................................................26
4.14 Beam rotation ....................................................................................................... 26
4.14.1 Range ........................................................................................................... 26
4.14.2 Control ..........................................................................................................27
4.15 Gobos .................................................................................................................... 27
5 Controls and parameters ................................................................................................ 28
5.1 Local display and controls ..................................................................................... 28
5.1.1 Display ............................................................................................................ 28
5.1.2 Home screen ................................................................................................... 28
5.1.3 Menu ............................................................................................................... 29
5.1.4 Parameters .....................................................................................................30
5.1.4.1 Backlight .............................................................................................. 30
5.2 DMX512 - A remote control ...................................................................................30
5.2.1 Protocol ........................................................................................................................30
5.2.2 Conguration .............................................................................................................30
5.2.3 Parameters .................................................................................................................31
5.2.3.1 DMX Hold .......................................................................................................31
5.2.3.2 User ID ..............................................................................................................31
5.2.3.3 Transfer settings ...........................................................................................32
5.2.4 DMX chart ............................................................................................................................33
5.2.5 DMX ranges .................................................................................................................33
5.2.5.1 Strobe duration .................................................................................. 33
5.2.5.2 Strobe speed ....................................................................................... 33
5.2.5.3 Response time .................................................................................... 33
5.2.5.4 Control mode ..................................................................................... 34
5.2.5.5 Source Type ........................................................................................34
5.2.5.6 Gel Type ..............................................................................................35
5.2.5.7 Gel references ..................................................................................... 35
5.2.5.8 Gel Saturation .................................................................................... 35
5.2.5.9 Gel Transmission ................................................................................ 35
5.2.5.10 Gel Fade Time ................................................................................... 35
5.2.5.11 Gel Fade Mode ..................................................................................36
5.2.5.12 CCT .....................................................................................................36
5.2.5.13 DeltaUV ............................................................................................. 36
5.2.5.14 Color CIE x......................................................................................... 36
5.2.5.15 Color CIE y......................................................................................... 36
5.3 RDM remote control ..............................................................................................36
5.3.1 Protocole ........................................................................................................36
5.3.2 PIDs list ........................................................................................................... 37
5.3.3 Parameters ....................................................................................................38
5.4 Fan cooling modes .................................................................................................38
5.4.1 Range .............................................................................................................. 38
5.4.2 Control ........................................................................................................... 38
5.5 LEDs Feedback ........................................................................................................ 39
5.5.1 Trouble shooting ............................................................................................ 39
5.5.2 Parameters .....................................................................................................39
5.5.2.1 Auto-OFF ............................................................................................. 39
5.6 Home values............................................................................................................40
5.6.1 Range .............................................................................................................. 40
6 Service ................................................................................................................................ 41
6.1 Preventive maintenance ........................................................................................41
6.1.1 Frequency ...................................................................................................... 41
6.1.2 General cleaning .......................................................................................... 41
6.1.3 General visual check .................................................................................................41
6.1.4 LED source ...................................................................................................... 41
6.1.5 Optics ............................................................................................................. 41
6.1.6 LED house cleaning ....................................................................................... 41
6.1.7 LED module cleaning procedure .................................................................. 42
6.2 Analysis ...................................................................................................................44
6.3 Electronic thermal management system.............................................................44
6.4 Firmware update ....................................................................................................44
6.5 Factory defaults ...................................................................................................... 45
6.5.1 Modes ...........................................................................................................................45
6.5.2 Control .........................................................................................................................45
Annex 1 - Gel References .............................................................................................. 46
Annex 2 - Home Values ................................................................................................47
Table of Contents
EN
EN - 1 -
GENERAL INSTRUCTIONS
1. Not for residential use.
2. These fixtures must only be serviced by a qualified technician.
3. In addition to the instructions indicated on this page, relevant health and safety requirements of the appropriate EU
Directives must be adhered to at all times.
4. This fixture is in compliance with section 17 - Lighting appliance for theatre stages, television, cinema and photograph studios.
Standards NF EN 60598-1, NF EN 60598-2-17, Low Voltage Directive 2014/35/UE & EMC Directive 2014/30/UE.
5. This fixture is rated as IP20, and is for indoor use only.
FIXTURE
6. Ensure fixture is correctly mounted on an appropriate support.
7. Protection screens and lenses must be replaced in the event of any damage, such as cracks or deep scratches, since these might
reduce performance.
8. When hung or flown the fixture must be secured by an additional hanging accessory (such as a safety cable or bond) of suitable
length.
9. Safety bonds or cables must be securely attached to the back of the fixture and be as short as possible, or rolled up as necessary,
to minimise travel distance should the fixture be dislodged.
10. Movable accessories (scroller, etc.) must also be secured with a suitable safety cable or bond at the front of the fixture.
11. The combined weight of both the fixture and the accessories must be considered when choosing the load-bearing capability of
safety cable or bond.
12. Do not open lighting fixture when the source is on.
13. WARNING: LED source become hot during use. Allow fixture to cool before servicing.
14. Do not tamper with design of fixture nor any of its safety features.
15. Tighten electrical mains cable connections regularly and replace with one of identical specification if damaged.
16. Use only with correct power supply.
VENTILATION
17. Keep well away from flammable material.
18. Not for outdoor use. Do not cover. Do not permit fixture to get wet.
19. To avoid overheating, do not obstruct air vents.
20. Ensure any cooling fans are in correct working order. If fans are not working, turn fixture off immediately and service as necessary.
CLEANING
21. Do not touch the LED source with your fingers.
22. To clean the optical parts, use a soft cloth in combination with distilled water or isopropyl alcohol recommended for coated optics.
Do not use any cleaning product that contains solvents or abrasives, as these can cause surface damage. Dry with a soft lint-free cloth.
23. Regularly remove dust with a soft lint-free cloth.
24. If the fixture has filters, they must be cleaned frequently.
POWER SUPPLY
25. Disconnect from the mains before servicing.
26. Mains connection only. Do not connect to "electronic output" such as dimmer.
27. Ensure power supply circuit breakers, always remain accessible.
PLEASE NOTE
This product has been built to conform to European standards relating to professional lighting equipment.
Any modification made to our products will void the manufacturers' warranty.
1 User’s instructions
Minimum
distance
Risk
group 2
651SX 4C :
0,5m (1,64 ft )
653SX 4C :
0,5m (1,64 ft )
654SX 4C :
0,5m (1,64 ft )
651SX 4C:
18,7m (61,35 ft )
653SX 4C:
8m (26,25 ft )
654SX 4C:
13,5m (44,29 ft )
Risk
group 1
Photobiological safety according to EN62471
Risk group 2
CAUTION: Possibly hazardous optical
radiation emitted from this product.
Do not stare at operating lamp.
Maybe harmful to the eye.
X1 X2
Group risk 2. Luminaires should be positioned so that prolonged staring into
luminaire at a distance closer than 18,7m (651SX 4C), 8m (653SX 4C) &
13,5m (654SX 4C) is not expected.
EN
1
3
2
4
12
6
5
11
8
18
19
7
17
10
15
13
14
16
9
1
EN - 2 -
2 Presentation
2.1 Functions
2.2 Identication labels
2.2.1 Label on LED compartment
Description
Units :
- Weight = kilogram (kg).
- Intensity = Ampere (A).
- Voltage = Volt (V).
- Frequency = Hertz (Hz).
- Temperature = degree Celsius (°C).
1. MOD. : Model
2. VERS. : Version
3. U : Nominal voltage input (V)
4. I : Nominal intensity (A)
5. P : Maximum power input (W)
6. IP : International Protection Rating
7. t°a : Maximum ambient temperature (°C)
8. t°c : Maximum external temperature of the unit (°C)
9. Net weight (kg)
10. Minimum distance between a flammable
material and the lighting unit (m)
11. LED type
12. Serial number
13. Replace broken glass
14. Class 1 product label
15. Read manual first label
16. European conformity label
17. WEEE directive label
18. CEI-TR-62778 - Do not stare at light source
19. EN62471 - Risk group
20. UKCA (UK Conformity Assessed) label
1 2
34
5 6
7 8
9
10
11
12
13 14
18 15 16 2019 17
Description
1. Identification plates
2. Data connector (IN and OUT)
3. Power connector (IN and OUT)
4. Local display and controls
5. Handle
6. Safety cable attachment point
7. Hanging yoke
8. Tilt index
9. Tilt locking handle
10. Shutters
11. Shutter locking system
12. Lens tube rotation locking button
13. Lens tube access
14. Focus adjustment
15. Front slot for accessories and gel frame holder
16. Front slot locking system
17. Zoom adjustment
18. Gobo holder
19. Iris
EN
EN - 3 -
2.2.2 Label on lighting unit
1 2 3 4 5 6
2.3 Accessories included
Reference Description
1 PF500M2 180 x 180 mm (7.1 x 7.1 in) metal filter holder
2 SGUX Universal A-size gobo holder (metal, glass, frosted glass)
3 D8 Shutter (x4)
4 DN41222600 Quick Start manual
1 CAL03 3 meter power cable ( 3G1,5 HO7RNF) with Neutrik PowerCon© True1 TOP
and CEE 7/7 (2P+T NF/SCHUKO) connectors (standard version)
2 CAL04 1,50m power cable UL/CSA with Neutrik PowerCon© True1 TOP connector
(North American version)
Description
Units :
- Weight = kilogram (kg).
- Intensity = Ampere (A).
- Voltage = Volt (V).
- Frequency = Hertz (Hz).
- Temperature = degree Celsius (°C).
1. Model beam angles
2. Net weight (kg) without LED compartment
3. Serial number
4. Class 1 product label
5. Read manual first label
6. European conformity label
7. WEEE directive label
8. Operating positions
9. UKCA (UK Conformity Assessed) label
Quick
Start
Guide
3 6 75 9
1248
EN
EN - 4 -
5
6 7 8 9 10
11
2.4 Accessories
1 2 3 4
Reference Description
1CAV 600A Double slot front cassette for 180 x 180 mm accessories
CAV 600AE Double slot front cassette for 185 x 185 mm accessories
2 PCP1716A 16A blue 2P+E 6h IEC60309 power connector
3 PF600M2 185 x 185 mm (7.28 x 7.28 in) metal filter holder
4 G500 180 x 180 mm safety grid
5 IWSX755 Drop-in iris (monoplane) with holder
6 VD 120 120 x 120 mm inner frosted glass
7 FCD600 Angled yoke
8 D8 Shutter
9 876 Hook clamp 40 x 10 mm with 28 mm M10 screw for Ø35 to Ø50 mm pipes
10 880 Hook clamp 40 x 10 mm with 28 mm M10 screw for Ø50 to Ø63 mm pipes
11 CS2 Safety cable Ø3 mm (length = 600 mm)
12 APH 68LED Double-condenser set for Led profile
13 T/650SXCW SULLY 115 W LED compartment - Cool White - 3 meter power cable with CEE 7/7 (2P+T NF/
SCHUKO) connector
14 T/650SXWW SULLY 115 W LED compartment - Warm White - 3 meter power cable with CEE 7/7 (2P+T NF/
SCHUKO) connector
15 TH600 180 x 180 mm "Top hat" (without safety cable)
16 FO100-10 Ø97 mm optical filter for coloured LED source - type 10
17 DMXcat Bluetooth DMX/RDM Multifunction test tool - City Theatrical DMXcat®
12 13 14 15
17 16
EN
EN - 5 -
3 Set-up
3.1 Mechanics
3.1.1 Operating positions
3.1.2 Minimum distance between a ammable material and the lighting unit
3.1.3 Instructions for use
3.1.4 Hanging
• Ensure fixture is correctly mounted on an appropriate support
Minimum : 40°C
104°F
5°C
40°F
IP20 - Indoor use only
Maximum :
0,5m / 1,64 ft
Net weight:
653SX 4C = 12.8 kg (28.2 lbs)
654SX 4C = 14.1 kg (31,1 lbs)
651SX 4C = 14.5 kg (32 lbs)
90° 90°
EN
EN - 6 -
Power supply
Voltage Frequency Input power Connectors
100 T 264 V 50-60 Hz
0.88 A / 175 W @ 230V cos y = 0,87
1.67 A / 178 W @ 110V cos y = 0,98
1.82 A / 178 W @ 100V cos y = 0,99
180 W max,
Max: 2.1 A
Neutrik powerCON TRUE1 TOP
Input :
ref. NAC3FPX-TOP
3.2 Electrical information
3.2.1 LED source
Never touch or scratch the LED surface.
TSee 6.1.4 LED cleaning procedure if cleaning is necessary.
3.2.2 Power supply
3.1.5 Safety cable
• Class 1 product. This luminaire must be earthed.
• Must be connected directly to AC power. Do not connect to dimmer power.
• Automatic mains voltage detection.
Power
Maximum :
8 units @ 230V
• When hung or flown the fixture must be secured by an additional hanging accessory (such as a
safety bond or cable) of suitable length.
• The combined weight of both the fixture and the accessories must be considered when choosing
the load-bearing capability of safety cable or bond.
• Safety cables or bonds must be securely attached to the back of the fixture and be as short as
possible, or rolled up as necessary, to minimise travel distance should the fixture be dislodged.
Daisy chain (with delivered power cable):
EN
2
1
In Out
DMX IN DMX OUT
2
3
4
5
51
4
3
2
1
EN - 7 -
Power cable
Power cable Connector Mains plug Cable type Cable length Wiring
1 Standard
version Neutrik® powerCON
TRUE1 TOP
NAC3FX-W-TOP
CEE7/7 3G1.5
H07RNF
3 m
9.8 ft
Live: Brown
Neutral: Blue
Ground: Yellow/Green
2
North
American
version
-
14AWG
SJ TYPE
(UL/CSA)
1.5 m
4.9 ft
Live: Black
Neutral: White
Ground: Green
DATA connectors
PIN # DMX Description
1 Shielding Foil & Braided Shield
2 DMX (-) 1st conductor of 1st twisted pair
3 DMX (+) 2nd conductor of 1st twisted pair
4 Not used 1st conductor of 2nd twisted pair
5 Not used 2nd conductor of 2nd twisted pair
3.3 DATA
3.3.1 DMX 512-A / RDM
Protocol Input connector Output connector
USITT DMX 512-A
RDM XLR 5-pin XLR 5-pin
Maximum :
31 units total
Daisy chain:
DMX Console
EN
EN - 8 -
3.4 Accessories
3.4.1 Front lter holder
3.4.2 Double-condenser set
For filter dimensions,
Tsee 4.12
The filter holder includes perforations designed
for stapling to keep the gel in position.
For full procedure, see section 6.1.7
Only possible with LED version
(not with halogen)
Tools
1 : Angled L- Shaped Open-Socket Wrench – 10 mm
or
2 : Flat spanner – 10 mm
EN
EN - 9 -
3.4.3 Internal lter holder
3.4.4 Gobo holder / Iris
For filter dimensions,
Tsee 4.12
For gobo dimensions,
Tsee 4.15
EN
EN - 10 -
3.4.5 Shutters
Step 1
Step 2
Step 3
EN
EN - 11 -
4 Operations
4.1 Source type
4.1.1 Range
4.1.2 Control
Compatible functions
Colour Mix
Colour
Temperature
CCT
High
Brightness
High
Quality
Colour
Filters DimShift
Source type See 4.3 See 4.4 See 4.5 See 4.5 See 4.6 See 4.9
Tungsten 3200 K - DimShift X X X
Tungsten 3000 K - DimShift X X X
Tungsten 3200 K X X
Tungsten 3000 K X X
Daylight 6500 K (D65) X X
Generic CCT - High Quality X X X
Generic CCT - High Brightness X X X
Generic CCT - High Quality - DimShift X X X X
Generic CCT - High Brightness - DimShift X X X X
Colour Mix - High Quality X X
Colour Mix - High Brightness X X
Remotely with DMX512-A protocol
Mode 3 - 4 - 5 - 6
(see 5.2.4 DMX chart for function details)
Locally with DMX mode 1 - 2 and
Stand Alone mode - see 5.6 Home value
White presets
Reproduce existing
source with the best
colour rendering
Tungsten
3000 K
Tungsten
3200 K
Daylight
6500 K
(D65)
CCT - High
Quality
1700 - 10000 K
CCT - High
Brightness
1700 - 10000 K
Colour Mix -
High Quality
Colour Mix-
High
Brightness
Generic CCT
White source with
adjustable colour
temperature (CCT)
Colour Mix
Manual colour
control
DMX512-A
EN
DMX512-A
EN - 12 -
4.2 Light intensity
4.2.1 Range
4.2.3 Parameters
4.2.3.1 Dimming resolution - DMX only
T Set through RDM protocol, DMX control channel or local control
4.2.3.2 Dimming curve
T Set through RDM protocol or local control
Resolution DMX mode
8 bits – 255 steps 1
16 bits – 65 535 steps 2 - 3 - 4 - 5 - 6
4.2.2 Control
Remotely with DMX512-A protocol
Mode 1 - 2 - 3 - 4 - 5 - 6
(see 5.2.4 DMX chart for function details)
Locally via
STAND ALONE mode
Focus mode: when standby screen displayed,
Push the UP arrow button for 3 secs → Light output = 100% for 1 minute
Push the UP arrow button to Exit → Light output = 0%
0% 100%
EN
EN - 13 -
4.2.3.3 Dimming mode
T Set through RDM protocol or local control
4.2.3.4 Response time
T See 4.8
4.2.3.5 DimShift
T See 4.9
Mode Frequency
PWM 1282 Hz / 2500 Hz / 5000 Hz / 6000 Hz / 15000 Hz* / 20000 Hz
(*) Default value
EN
EN - 14 -
4.3 Colour mix
4.3.1 Range
RGB (ANSI E1.54–2015)
Colour space:
NATIVE / SRGB-REC. 709 / REC. 2020 / PROPHOTO RGB
Tsee 4.3.3
CIE xy control (ANSI E1.54–2021)
x = 0 T 0,85
y = 0 T 0,85
Colour space: CIE 1931 xy
Hue Saturation (ANSI E1.54–2015)
Hue = 0 T 360°
Hue of 0° = Full Red (RGB = 100,0,0)
Hue of 120° = Full Green (RGB = 0,100,0)
Hue of 240° = Full Blue (RGB = 0,0,100)
Saturation = 0 (white) T 100% (saturated colour)
Colour space:
NATIVE / SRGB-REC. 709 / REC. 2020 / PROPHOTO RGB
Tsee 4.3.3
RED
GREEN
BLUE
EN
EN - 15 -
4.3.2 Control
RED
GREEN
BLUE
LIME
RAW Mode*
Locally via
STAND ALONE mode - see 5.6 Home value
CIE xy Mode 3 | Source type = Colour Mix
Hue Saturation Mode 4 | Source type = Colour Mix
RGB Mode 5 | Source type = Colour Mix
RAW Mode 6 | Source type = Colour Mix
Remotely with DMX512-A protocol
DMX512-A
(*) Calibration disabled
EN
EN - 16 -
4.3.3 Parameters
4.3.3.1 Colour space selection
ProPhoto (ROMM) – White point = D50 REC. 2020 - White point = D65
SRGB-REC. 709 - White point = D65 Native - LED engine gamut
Point Red Green Blue
R 100 % 0 % 0 %
G 0 % 100 % 0 %
B 0 % 0 % 100 %
W (White point) 100 % 100 % 100 %
T Set through RDM protocol, DMX control channel or local control
- For RGB and Hue Saturation modes only
EN
0% 100%
EN - 17 -
4.3.3.2 High Quality / High Brightness
T See 4.5
4.4 Colour Temperature CCT
4.4.1 Range
Colour
Temperature
CCT
1 700 Kelvin 10 000 Kelvin
Delta UV
-100% (Magenta) 0 +100% (Green)
EN
EN - 18 -
4.4.2 Control
4.4.3 Parameters
4.4.3.2 DimShift
T See 4.9
4.4.3.1 High Brightness / High Quality
T See 4.5
Remotely with DMX512-A protocol
Mode 3 - 4 - 5 - 6 | Source type = Generic CCT /
Colour Mix
(see 5.2.4 DMX chart for function details)
Remotely with DMX512-A protocol
Mode 3 - 4 - 5 - 6 | Source type = Generic CCT
(see 5.2.4 DMX chart for function details)
Locally with DMX mode 1 - 2 and
Stand Alone mode - see 5.6 Home value
Locally with DMX mode 1 - 2 and
Stand Alone mode - see 5.6 Home value
Example : Generic CCT @ 5600K
Mode Light output Colour rendering
HB – High Brightness + –
HQ – High Quality – +
4.5 High Brightness / High Quality
4.5.1 Range
4.5.2 Control
DMX512-A
DMX512-A
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49

Robert Juliat SULLY T/650DSX4C User manual

Brand
Robert Juliat
Model
SULLY T/650DSX4C
Category
Stroboscopes & disco lights
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents