Displays2go PPLNRCKCRV Operating instructions

Hello! I've reviewed the assembly instructions for the DISPLAYS2GO clothing rack, model PPLNRCKCRV. The document outlines the steps for assembling the rack, including attaching the casters to the base, fitting side uprights, and securing the hangbar. I'm ready to answer any questions you have about assembling this rack.
What tool is needed to attach Casters?

How many casters are included?

What are the components of the clothing rack?

ASSEMBLY INSTRUCTIONS

PPLNRCKCRV

PARTS LIST

A. Base

B. Hangbar

C. Side Upright

D. Caster

E. Wrench

1 of 2

C E

Step 1. Screw (4) Casters into the base using the wrench provided with the unit. Tighten all

Casters to secure the cloth rack.

2 of 2

Step 3. Keep the assembly upright. Twist wing nuts on uprights to loosen adjustable connectors.

Align Top Hangbar with side uprights as shown, then Insert hangbar into uprights. Drop and lock

into position by tighten the nuts.

NOTE: Hardware may loosen overtime. Periodically check that all connections are tight.

Clean with soft, dry cloth. To protect nishing, avoid using chemicals and household cleansers.

Questions? Call 1-800-572-2194.

Step 2. Thread each Lower Upright into the base. Before move to next step, tighten uprights

completely to secure the clothing rack.