Tascam HD-R1 Product information
- Category
- Musical Equipment
- Type
- Product information
Tascam HD-R1 is a solid-state audio recorder designed for sound contractors, offering reliable recording and playback of PCM and MP3 files with various connectivity options. It features XLR balanced mic/line inputs with switchable phantom power, Euroblock terminal I/O, unbalanced RCA I/O, and SPDIF digital I/O. With Ethernet, USB, and card reader connectivity, file transfer is made easy.
Tascam HD-R1 is a solid-state audio recorder designed for sound contractors, offering reliable recording and playback of PCM and MP3 files with various connectivity options. It features XLR balanced mic/line inputs with switchable phantom power, Euroblock terminal I/O, unbalanced RCA I/O, and SPDIF digital I/O. With Ethernet, USB, and card reader connectivity, file transfer is made easy.
1-U rack-mount solid-state audio recorder
Uses popular, secure CompactFlash card as
recording media
USB host interface for USB flash cards
Audio data formats: PCM (16-/24-bit), MP3
Samplig rates supported:
PC M: 44.1/48/88.2/96 kHz
MP3: 44,1/48 kHz
XLR balanced mic/line I/O with switchable
20-dB PAD
Phantom power (switchable on rear panel,
front LED indicator)
Euroblock terminal I/O
Unbalanced RCA I/O
Rotary analogue input level controls on front
panel
SPDIF Digital I/O (coaxial and optical)
RJ-45 Ethernet interface (100-Mbit/s) for file
transfer and control
RS-232 interface for control
D-sub 25-pin parallel remote control
interface
Direct Play via parallel interface
Power-on play (start playback when power
comes up)
Headphones jack with level control on front
panel
Input Through and Auto Fade functions
Input monitoring/mixing of live stereo input
along with play back
Play modes: Program, Folder, Shuffle,
Interval, and more
Pre-record buffer (up to 20 seconds at 44.1
kHz)
Av ailable as an option: RC-SS20 Direct Play
Controller for instant access to 16 tracks,
announcements or effects
HD-R1
Solid-State Audio Recorder
The HD-R1 is a two-channel, single rack-mount recording and playback device created with the sound
contractor in mind. Utilizing the highly reliable C ompactFlash card, the HD-R1 records PC M files at up
to 96 kHz or MP3 files at 44.1/48 kHz both with 16/24-bit resolution. File transfer can be accomplished
via Ethernet, USB, or a card reader. The ability to control the unit remotely is provided via RS-232,
Parallel, and RJ45 100-Mbit Ethernet.
To further enhance the HD-R1’s feature set, mic preamps with 20-dB PAD and phantom power (rear-
panel selectable) have been included. A variety of contractor-friendly I/O options, such as unbalanced
RC A, balanced XLR and Euroblock, and SPDIF digital (coaxial and optical) are also available.
And of course … the HD-R1 offers traditional source device features like power-on play, front panel
rotary input level controls, a headphone jack with level control, and a variety of playback modes.
Main Features
Specifications
General
Re cording Me dia Type I a nd Type II Com pact Fla sh m e dia
File Syste m s FAT16 and FAT32
File Form ats Broa dcast W ave (W AV) and MPEG 1 Audio Layer 3 (MP3)
file s)
Re cording T im e 6 ho urs 40 m inute s (4 GB C om pa ct Flash C a rd, 44.1 k Hz,
16-bit stere o, W AV)
about 70 ho urs (4 GB C om pact Fla sh Ca rd, 44.1 k Hz, 16-
bit ste reo, MP 3 128 k b/s)
Sa m pling Ra te s 44,1 k Hz, 48 k Hz, 88,2 kHz, 96 k Hz
The sa m pling rate fo r MP 3s is 44.1 or 48 k Hz.
Q uantization 16 o r 24 bits
MP 3 Bit Ra te s Stereo 64/80/96/112/128/160/192/224/256/320 k b/s
Mono 32/40/64/80/96/112/128/160 kb/s
Va ria ble Bit R a te (VBR) file s ca n be pla ye d but no t
recorded.
Pre-record buffer Up to 20 se conds (a t 44.1 kHz)
Audio Performance
Freque ncy re sponse , nom inal le ve l (MIC to LINE OUT) 20 Hz to 20 k Hz ±1.0 dB (44.1 kHz / 48 kHz)
20 Hz to 40 k Hz +0.5 dB / –4 dB (88.2 k Hz / 96 kHz)
Noise level a t m ax im um trim (MIC to LINE OUT) < –55 dBu (22 Hz to 22 kHz, 150 Ω input te rm inatio n)
Dynam ic range a t m inim um trim (MIC to LINE O UT) 105 dB(A) (44.1 k Hz, 22 k Hz LPF)
Tota l harm o nic disto rtio n + noise (MIC to LINE OUT) <0.01 % (m in trim , 22 k Hz LPF, 1 k Hz tone )
Crosstalk at 1 k Hz (MIC to LINE O UT) > 80 dB (150 Ω input te rm ina tion)
Delay 44.1 k Hz < 0.6 m s
96 k Hz < 0.6 m s
Analogue audio inputs and outputs
Micropho ne/Line input XLR-3-31 (1 = ground, 2 = hot, 3 = cold (–))
Im pe da nce 2.4 k Ω
Nom inal level –63.8 dBu (m ax trim ) to –7.78 dBu (m in trim )
Nom inal level with pad –43.8 dBu (m ax trim ) to +12.2 dBu (m in trim )
Max im um le vel +28.2 dBu
Max im um gain 56 dB
P hantom P owe r 2 x +48 V, 10 m A
Line Input RC A
Im pe da nce 10 k Ω
Nom inal level –66.0 dBV (m ax trim ) to –10 dBV (m in trim )
Max im um le vel +6 dBV
Max im um gain 56 dB
Ba lanced Line o utput XLR-3-32 (1 = ground, 2 = hot (+), 3 = cold (–))
Im pe da nce 100 Ω
O pe rating Le ve l (a djusta ble) +4 dBu nom ina l / +24 dBu m ax im um
+4 dBu nom ina l / +22 dBu m ax im um
+4 dBu nom ina l / +20 dBu m ax im um
+4 dBu nom ina l / +18 dBu m ax im um
+6 dBu nom ina l / +15 dBu m ax im um
Unba lanced Line o utput RC A
Im pe da nce 100 Ω
O pe rating Le ve l (a djusta ble) –10 dBV no m inal / +10 dBV m a xim um
–10 dBV no m inal / +8 dBV m a x im um
–10 dBV no m inal / +6 dBu m ax im um
–10 dBV no m inal / +4 dBu m ax im um
–8 dBV nom inal / +1 dBu m ax im um
He adphone s O utput 6.3-m m phone jack (tip = left, ring = right, slee ve =
ground)
Minim um load im peda nce 32 Ω
Max im um le vel +4.7 dBu (a t 1% distortion)
Max im um powe r 50 m W + 50 m W
Digital audio inputs and outputs
Digita l input and output C oa x ial R CA phono jack)
Im pe da nce 75 Ω
Form a t SP DIF (IEC 60958-2)
Q uantiza tion 16-bit o r 24-bit
Other connectors
RS-232C 9-pin D-sub (fem ale )
C lea rance Acce pts D-sub plugs with housings < 15m m high
Da ta rate 9600 bps
Pa ralle l control port 25-pin D-sub (fem ale)
C lea rance Acce pts D-sub plugs with housings < 15m m high
Input level 0 V to 3.3 V (lo gic lo w < 0.8 V, logic high > 2.0 V)
Inputs ha ve inte rna l pull-ups a nd can be a ctivated by
sho rting to ground.
Busy current loop rating 60 V DC (re la y ope n), 1.5 A DC (relay close d)
LAN RJ45
Da ta rate 10/100 Mbps
Form a t 100Ba se -TX (IEEE 802.3)
USB USB A-type 4-pin
Form a t USB 2.0
Power supply and other specifications
Ma ins powe r 100 VAC , 50/60 Hz
120 VAC , 60Hz
230 VAC , 50Hz
240 VAC , 50Hz
In-rush current 700 m A
Powe r consum ption 10 W
Displa y 192 x 32 pix e l, white LED back light
O perating T em perature 5ºC to 35ºC
Dim ensions (W x H x D) 483 x 280 x 44 m m (fits in a 1U 19” rack spa ce)
W eight 3.2 k g
Design and specifications subject to change without notice.
Last modified: 2015-02-12 12:33:11 UTC
-
1
-
2
-
3
Tascam HD-R1 Product information
- Category
- Musical Equipment
- Type
- Product information
Tascam HD-R1 is a solid-state audio recorder designed for sound contractors, offering reliable recording and playback of PCM and MP3 files with various connectivity options. It features XLR balanced mic/line inputs with switchable phantom power, Euroblock terminal I/O, unbalanced RCA I/O, and SPDIF digital I/O. With Ethernet, USB, and card reader connectivity, file transfer is made easy.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Tascam US-1x2 Product information
-
-
Tascam US-20X20 Product information
-
-
Tascam US-366 Product information
-
Tascam US-144MKII Product information
-
-
Tascam US-322 Product information
-
Tascam 2488neo Product information
-
Tascam MINISTUDIO CREATOR US-42 Product information
Other documents
-
SPL Crimson 1252 User manual
-
Apogee Trak2 Owner's manual
-
RME Fireface UC Owner's manual
-
Yamaha MW8cx Owner's manual
-
Lynx Studio Hilo silver USB User manual
-
Focusrite TTPRO Owner's manual
-
Denon Professional DN 900R User manual
-
-
Yamaha MW12C Owner's manual
-
Edirol R-09HR Quick start guide
