Caliber PDVBT 101 Owner's manual

PDVBT 101
Caliber
Brand
Caliber
Model
PDVBT 101
Category
LCD TVs
Type
Owner's manual

This manual is also suitable for

Page is loading ...
Warning: Never stare directly into the laser beam.
Warning: when the unit using by child, parents must make sure
to let the child understand all contents in Instruction book how
battery using to guarantee using battery correctly all the time.
Warning: when find battery overheat, swell or dour, please
stop using battery and contact service centre for getting
replacement.
Warning: do not charging battery on the place of insufficient
ventilation such as: mattress, sofa, cushion , soft mat......
Warning: we will not take any responsibility if user incorrectly
use bat
tery, not following our warning instruction label on the
battery case.
It is forbidden by law to copy, broadcast, show,broadcast via
cable,play in public, or rent copyrighted material without permission.
This product features the copy protection function developed by
Macrovision.Copy protection signals are recorded on some
discs.When recording and playing the pictures of these discs picture
noise will appear.This product incorporates copyright protection
technology that is protected by method claims of certain U.S.Patents
and other intel
lectual property rights owned by Macrovision
Corporation and other rights owners.Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by macrovision Corporation. Reverse
engineering or disassembly is prohibited.
SERIAL NUMBER:
You can find the serial number on the back of the unit.This number
is unique to this unit and not available to others.You should record
requested information here and retain this guide as a permanen
t
record of your purchase.
Model No. ______________________________
Serial No. ______________________________
Date of Purchase_________________________
Safety Precautions
N
N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
Notes on Copyrights:
charge
over
heat
40 C
strong
impact
1
10
USB
To access the Menu, press the SETUP button and select USB.
Multi-Media
Switch to USB mode and plug in USB to view files.
Troubleshooting
The image stopped
suddenly or mosaic
Problem Potential Reasons What to do
No picture
Power isn't connected
Connect the power
The power switch
is not on
Switch on the power
Screen shows
No Signal
DVB-T cable not
Plug in the DVB-T cable
Incorrect setting
Reset setting
No sound from
speaker
No or incorrect
connection
with audio cable
Connect the audio
correctly
Sound on mute
Turn off mute function
Incorrect sound track Try another sound track
Only sound, no
image on the
screen
No or incorrect connection
with AV cable
Make sure cables
connected correctly
The program is a radio
program
Press <TV/RADIO> key
shift into TV mode
Remote Control
is not responding
The battery is exhausted
Change battery
Remote Control is not
facing or close enough
to the Set Top Box
Adjust the position
Remote Control and
closer to the unit
The signal is too weak
Strengthen the signal
cable
are
to
of the
move
connected
Technical Specifications
Video
Decoder Format
MPEG4 AVC/H.264 HP@L4
MPEG2 MP@ML.HL
Output Port
CVBS,HDMI
Audio
Decoder Format
MPEG-1 (layer1&2 )&3
Audio output
Stereo
Power
Voltage
DC 9V (1.5 A)
Working Power
10W
Item Sub Item Parameter
Tuner
Input Frequency
170~230MHz
470~860MHz
RF Input level
-25~-80dBm (64QAM)
-10~-75dBm (256QAM)
IF Bandwidth
7MHz and 8MHz
Modulation
QPSK,16QAM,64QAM,256QAM
HEVC/H.265 HT@L4
Photo Configure
Set the parameters for viewing photographs.
Movie Configure
Set the parameters for displaying movie subtitles.
PVR Configure
Set the parameters for record device.
Headrest Bracket (sold separately)
NOT included!
Product code: “DVD-Bracket”
EAN:
87.14505.04516.0
Warning: when the unit is used by a child, the parents must make sure
to let the child understand all contents in Instruction book how to use the
battery to guarantee useage of battery correctly all the time.
Warning: when nd battery overheat, swell or dour, please
stop using the battery and contact service centre for getting
replacement.
Warning: do not charge the battery on the place of insucient
ventilation such as: mattress, sofa, cushion , soft mat......
Warning: we will not take any responsibility if user incorrectly
uses the battery, not following our warning instruction label on the
battery case.
AV OUT COAXIAL OFF ON
DC IN
9-12V
HDMI ANT.
1
2
3
4
5
6 7
8
9
10
11
12
13
14
15
1.SETUP
2.ENTER
3.EXIT
4.UP
5. DOWN
6.LEFT/VOL-
7. RIGHT/VOL+
8.AV OUT
9.COAXIAL
10.Earphone Socket
11.ON/OFF
12.DC IN 9-12V
13. ANT.
14. HDMI
15.USB
Identification of Controls
Main Unit
2
ENGLISH
ENGLISH
1. SETUP
2. ENTER
3. EXIT
4. UP
5. DOWN
6. LEFT/VOL-
7. RIGHT/VOL+
8. AV OUT
Video output
9. COAXIAL
10. Earphone Socket
11. ON/OFF
12. DC IN 9-12V
13. ANT.
Connect the Antenna for reception
14. HDMI
HDMI output
15. USB slot
Play media from USB
Identification of Controls
Remote control unit
1.POWER
On/off the power supply
2.VOL -
Adjust VOLUME.
3.0-9 NUMBER BUTTON
Selects numbered items in a menu.
4.SUBTITLE
Press SUBTITLE repeatedly during playback to viwe a different
subtitle languages , if avilable.
5.ZOOM
JPEG: Use ZOOM to enlarge or shrink the picture.
Each press of the ZOOM button change the TV screen
6.REC
Record digital service.
7.ENTER
Confirm and Enter
8.
SETUP
Main Menu/Return
9.FAV
Open Favorite Programs List Menu
10.TV/RADIAO
Switch between TV and Radio source
11.EXIT
12.DISPLAY
Display the information of the c
urrent signal
13.SOURCE
DVD/USB
14.VOL +
Adjust VOLUME.
15.REPEAT
Repeat Play mp3 and video
3
1 2
3
4
5
6 7 8
9 0
ENTER
SOURCE
MODE
MUTE
REPEAT
FAV
TV/RADIO
EXIT
VOL- VOL+
POWER
REC
TTX EPG
ZOOM
1
2
3
4
6
7
8
9
10
11
12
13
14
16
15
19
18
17
20
21
22
24
25
23
26
27
28
5
ENGLISH
ENGLISH
1. POWER
On/o the power supply
2. VOL -
Adjust VOLUME.
3. 0-9 NUMBER BUTTON
Selects numbered items in a menu.
4. SUBTITLE
Press SUBTITLE repeatedly during
playback to view a dierent
subtitle languages , if available.
5. ZOOM
JPEG: Use ZOOM to enlarge or shrink
the picture.
Each press of the ZOOM button
changes the TV screen
6. REC
Record digital service.
7. ENTER
Conrm and Enter
8. SETUP
Main Menu/Return
9. FAV
Open favorite programs list menu
10. TV/RADIO
Switch between TV and radio
11. EXIT
12. DISPLAY
Display the information of the cur-
rent signal
13. SOURCE
USB/TV
14. VOL +
Adjust VOLUME.
15. REPEAT
Repeat Play mp3 and video
16. MUTE
Mute the sound
17. AUDIO
Press AUDIO repeatedly during play-
back to hear a dierent audio
language or audio track, if available.
18. MODE
Mode menu setting
19. STOP
20. PLAY/PAUSE
21. RETURN
22. TTX
teletext
23. EPG
Show EPG information
24. BUTTON
Previous option.
25. BUTTON
Next option.
26. BUTTON
Fast forward
27. BUTTON
Fast backward
28. RED/GREEN/YELLOW/BLUE
Some specic function
Identification of Controls
Remote control unit
16.MUTE
Mute the sound
17.AUDIO
Press AUDIO repeatedly during playback to hear a different audio
language or audio track, if avilable.
18.MODE
Mode menu setting
19.STOP
20.PLAY/PAUSE
21.RETURN
22.TTX
23.EPG
Show EPG information
24.
BUTTON
Previous option.
25.
BUTTON
Next option.
26. BUTTON
Fast forward
27.
BUTTON
Fast backward
28. RED/GREEN
Some specific function
4
PICTURE
STANDBY
This function makes it possible to automatically put the device into
standby mode 3 or 4 hours.
3 H (3 hours): The device will automatically go into standby mode after
3 hours have passed from the time that any button was pressed.
4 H (4 hours): The device will automatically go into standby mode after
4 hours have passed from the time that any button was pressed.
OFF (Off): The automatic standby function will be deactivated.
Brightness
Set the brightness of the screen.
Contrast
Set the Contrast of the screen.
Color
Set the colours of the screen.
ENGLISH
Set the OSD Language
RESET
Reset to default setting.
MODE MENU SETTING
50
50
50
BRIGHTNESS
CONTRAST
COLOR
ENGLISH
RESET
STANDBY 3H
ENGLISH
ENGLISH
ENGLISH
ENGLISH
Basic Operation
5
First Time Installation
After all connections have been made properly, switch on TV and
make sure the receiver is connected to the Main Power. Press Power
button to switch receiver on. If you are using the receiver for the first
time or restored to Factory Default, the Main Menu will appear on
your TV screen.
(1) Select [OSD Language] and press RIGHT/LEFT key to select an
language.
(2) Select [Country] and press RIGHT/LEFT key to select your
country of residence.
(3) Select [Channel Search] and press RIGHT or OK key to begin
Automatic channel search.
(4) Once channel tuning is complete, you are now ready to watch TV.
To access the Menu, press the SETUP button and select [Program].
The Menu provides options to adjust theProgram Manage Settings.
Select an option and press OK or RIGHT to adjust that setting.
Press the EXIT button to exit the Menu.
To edit your program preferences (lock, skip, favourite, move or
delete), you will need to enter the Program Edit Menu. This Menu
requires a password to access. Enter the default password '000000'.
Program Edit
Program Edit
ALL TV
< >
018 The HITS
019 UKTV Br’tideas
021 TMF
022 Ideal World
01:00.01:00
17:00-19:00 StarDate
Rename
GOTO
Lock DeleteSkip FAVMove
FAV
Program Manage Settings
Basic Operation
5
First Time Installation
After all connections have been made properly, switch on TV and
make sure the receiver is connected to the Main Power. Press Power
button to switch receiver on. If you are using the receiver for the first
time or restored to Factory Default, the Main Menu will appear on
your TV screen.
(1) Select [OSD Language] and press RIGHT/LEFT key to select an
language.
(2) Select [Country] and press RIGHT/LEFT key to select your
country of residence.
(3) Select [Channel Search] and press RIGHT or OK key to begin
Automatic channel search.
(4) Once channel tuning is complete, you are now ready to watch TV.
To access the Menu, press the SETUP button and select [Program].
The Menu provides options to adjust theProgram Manage Settings.
Select an option and press OK or RIGHT to adjust that setting.
Press the EXIT button to exit the Menu.
To edit your program preferences (lock, skip, favourite, move or
delete), you will need to enter the Program Edit Menu. This Menu
requires a password to access. Enter the default password '000000'.
Program Edit
Program Edit
ALL TV
< >
018 The HITS
019 UKTV Br’tideas
021 TMF
022 Ideal World
01:00.01:00
17:00-19:00 StarDate
Rename
GOTO
Lock DeleteSkip FAVMove
FAV
Program Manage Settings
After all connections have been made properly, switch ON TV and
make sure the receiver is connected to the Main Power. Press Power
button to switch receiver ON. If you are using the receiver for the rst
time or restored to Factory Default, the Main Menu will appear on
your TV screen.
(1) Select [OSD Language] and press RIGHT/LEFT key to select an language.
(2) Select [Country] and press RIGHT/LEFT key to select your country of
residence.
(3) Select [Channel Search] and press RIGHT or OK key to begin Automatic
channel search.
(4) Once channel tuning is complete, you are now ready to watch TV.
To access the Menu, press the SETUP button and select [Program].
The Menu provides options to adjust the Program Manage Settings.
Select an option and press OK or RIGHT to adjust that setting.
Press the EXIT button to exit the Menu.
To edit your program preferences (lock, skip, favourite, move or
delete), you will need to enter the Program Edit Menu. This Menu
requires a password to access. Enter the default password ‘000000’.
Basic Operation
5
First Time Installation
After all connections have been made properly, switch on TV and
make sure the receiver is connected to the Main Power. Press Power
button to switch receiver on. If you are using the receiver for the first
time or restored to Factory Default, the Main Menu will appear on
your TV screen.
(1) Select [OSD Language] and press RIGHT/LEFT key to select an
language.
(2) Select [Country] and press RIGHT/LEFT key to select your
country of residence.
(3) Select [Channel Search] and press RIGHT or OK key to begin
Automatic channel search.
(4) Once channel tuning is complete, you are now ready to watch TV.
To access the Menu, press the SETUP button and select [Program].
The Menu provides options to adjust theProgram Manage Settings.
Select an option and press OK or RIGHT to adjust that setting.
Press the EXIT button to exit the Menu.
To edit your program preferences (lock, skip, favourite, move or
delete), you will need to enter the Program Edit Menu. This Menu
requires a password to access. Enter the default password '000000'.
Program Edit
Program Edit
ALL TV
< >
018 The HITS
019 UKTV Br’tideas
021 TMF
022 Ideal World
01:00.01:00
17:00-19:00 StarDate
Rename
GOTO
Lock DeleteSkip FAVMove
FAV
Program Manage Settings
Basic Operation
5
First Time Installation
After all connections have been made properly, switch on TV and
make sure the receiver is connected to the Main Power. Press Power
button to switch receiver on. If you are using the receiver for the first
time or restored to Factory Default, the Main Menu will appear on
your TV screen.
(1) Select [OSD Language] and press RIGHT/LEFT key to select an
language.
(2) Select [Country] and press RIGHT/LEFT key to select your
country of residence.
(3) Select [Channel Search] and press RIGHT or OK key to begin
Automatic channel search.
(4) Once channel tuning is complete, you are now ready to watch TV.
To access the Menu, press the SETUP button and select [Program].
The Menu provides options to adjust theProgram Manage Settings.
Select an option and press OK or RIGHT to adjust that setting.
Press the EXIT button to exit the Menu.
To edit your program preferences (lock, skip, favourite, move or
delete), you will need to enter the Program Edit Menu. This Menu
requires a password to access. Enter the default password '000000'.
Program Edit
Program Edit
ALL TV
< >
018 The HITS
019 UKTV Br’tideas
021 TMF
022 Ideal World
01:00.01:00
17:00-19:00 StarDate
Rename
GOTO
Lock DeleteSkip FAVMove
FAV
Program Manage Settings
ENGLISH
ENGLISH
6
Set Favourite Program/s
You can create a shortlist of favourite programs that you can easily
access.Set Favourite TV or Radio program:
1.Select the preferred program then press the PAVOURITE button.
A heart-shaped symbol will appear and the program is marked as a
favourite.
2.Repeat the previous step to select more Favourite programs.
3.To confirm and exit the Menu,press the EXIT key.
Disable Favourite TV or Radio Program:
Press the FAV buton on the Remote Control with the heart-shaped
symbol.
View Favourite Programs:
1.Press the Fav button and the Favou
rite Menu will appear.
2.Press UP/DOWN to selest your Favourite Programs.
3.Press OK to select your favourite program.
Delete a TV or Radio Program/s
1.Select the Program and then press the BLUE button A message
will appear.Press OK to delete the program.
2.Repeat the previous step to select more programs to delete.
Skip TV or Radio Program/s
1.Select the program you would like to skip and press the GREEN
button A skip symbol is displayed. The program is marked as a
skip.
2.Repeat the previous step to select more programs.
3.To confirm and exit themenu,press EXIT key.
Di
sable a skip TV or Radio Program:
Press the GREEN button on the skip program with the skip symbol.
Move a TV or Radio Program/s
1. Select the preferred program then press the RED button. A
move symbolwill appear.
2. Press UP/DOWN to move the program.
3. Press OK to confirm.
4. Repeat the above steps to move more channels .
Lock Program/s
You can lock selected programs for restricted view.
Lock a TV or Radio Program:
1.Select the preferred program then press the YELLOW button. A
lock-shaped symbol is displayed. The program is now marked as
locked.
2. Repeat the prev
ious step to select more programs .
3. To confirm and exit the menu, press the EXIT button.
4. Press the YELLOW button to disable the locked program.
5. To view the locked program, you will be require to enter either
the default.
First Time Installation
EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows scheduled programs
seven days in advance for every tuned channel. Press the EPG
button on the Remote Control to access guide.
You can use the UP/DOWN key to select the preferred program. If
there is more than one page of information, use the BLUE button
for page up and the YELLOW button for page down.
Program Guide
002 UKTV Br’tldeas Fri. 19 Nov 2004 16:59
Street Café
< >
19 Nov 16:30-17:00 Street Cafe
19 Nov 17:30-18:00 Gardens Unplugged
19 Nov 18:00-18:30 Water Gardens
19 Nov 18:30-18:59 Garden ER
19 Nov 18:59-19:01 UK Bright Ideas
19 Nov 19:01-00:59 UK Bright Ideas
20 Nov 00:59-06:59 UK Bright Ideas
20 Nov 06:59-07:01 UKTV Bright Ideas
20 Nov 07:01-07:25 Style Street
20 Nov 07:25-07:30 Too Good to Eat
19 Nov 17:00-17:30 Good Food Bites
Amusement
Salvador: Series in which
Dan Roland travels the world
sampling the best authentic
street food. This edition
comes from Salvador.
Page: 1 / 1
Page Down Page Up
Book Book LIST
OK INFO
First time installation
Set favourite programs
You can create a shortlist of favourite programs that you can easily access. Set
favourite TV or radio program:
1. Select the preferred program then press the FAVOURITE button. A heart-sha-
ped symbol will appear and the program is marked as a favourite.
2. Repeat the previous step to select more Favourite programs.
3. To conrm and exit the Menu,press the EXIT key.
Disable Favourite TV or Radio Program:
Press the FAV buton on the Remote Control with the heart-shaped symbol.
View Favourite Programs:
1. Press the Fav button and the Favourite Menu will appear.
2. Press UP/DOWN to selest your Favourite Programs.
3. Press OK to select your favourite program.
Delete a TV or radio program
1. Select the Program and then press the BLUE button A message will appear.
Press OK to delete the program.
2. Repeat the previous step to select more programs to delete.
Skip TV or Radio Program/s
1. Select the program you would like to skip and press the GREEN button A skip
symbol is displayed. The program is marked as a skip.
2. Repeat the previous step to select more programs.
3. To conrm and exit themenu,press EXIT key.
Disable a skip TV or Radio Program:
Press the GREEN button on the skip program with the skip symbol.
Move a TV or Radio Program/s
1. Select the preferred program then press the RED button. A move symbolwill
appear.
2. Press UP/DOWN to move the program.
3. Press OK to conrm.
4. Repeat the above steps to move more channels.
Lock Program/s
You can lock selected programs for restricted view.
Lock a TV or Radio Program:
1. Select the preferred program then press the YELLOW button. A
lock-shaped symbol is displayed. The program is now marked as
locked.
2. Repeat the previous step to select more programs .
3. To conrm and exit the menu, press the EXIT button.
4. Press the YELLOW button to disable the locked program.
5. To view the locked program, you will be required to enter the
password.
EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows scheduled programs
seven days in advance for every tuned channel. Press the EPG
button on the Remote Control to access guide.
You can use the UP/DOWN key to select the preferred program. If
there is more than one page of information, use the BLUE button
for page up and the YELLOW button for page down.
Sort
Video Setting
Channel Search
LCN (Logical channel number)
7
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order.
[Name] - Sort the channels in alphabetical order.
[Service ID] - Sort the channels according to the station.
To access the Menu, press SETUP then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust that setting. Press
EXIT to exit the menu.
To access the menu, press SETUP and select [Search Channel].
The Menu provides options to adjust the Search Channel settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
Set LCN on or off.
Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3
L
etter Box,4:3 Full, 16:9 Wide Screen , 16:9 PillarBox or Auto to
get the maximum display when watching TV.
Resolution
If the video does not appear correctly, change the setting. This setting
is to match the most common setting for HDMI.
[480i] for NTSC system TV.
[480P]: for NTSC system TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
[1080P]: for NTSC or PAL system TV.
TV format
If the video does not appear correctly, you need to change the
settings. This should match the most common setting f
or TVs in your
country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
ENGLISH
ENGLISH
Sort
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order.
[Name] - Sort the channels in alphabetical order.
[Service ID] - Sort the channels according to the station.
LCN (Logical channel number)
Set LCN on or o.
Video Setting
To access the Menu, press SETUP then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust that setting. Press
EXIT to exit the menu.
Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3
Letter Box, 4:3 Full, 16:9 Wide Screen , 16:9 PillarBox or Auto to
get the maximum display when watching TV.
Resolution
If the video does not appear correctly, change the setting. This setting
is to match the most common setting for HDMI.
[480i]: for NTSC system TV.
[480P]: for NTSC system TV.
[576i]: for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
[1080P]: for NTSC or PAL system TV.
TV format
If the video does not appear correctly, you need to change the
settings. This should match the most common setting for TVs in your
country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
Channel search
To access the menu, press SETUP and select [Search Channel].
The Menu provides options to adjust the Search Channel settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
Sort
Video Setting
Channel Search
LCN (Logical channel number)
7
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order.
[Name] - Sort the channels in alphabetical order.
[Service ID] - Sort the channels according to the station.
To access the Menu, press SETUP then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust that setting. Press
EXIT to exit the menu.
To access the menu, press SETUP and select [Search Channel].
The Menu provides options to adjust the Search Channel settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
Set LCN on or off.
Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3
L
etter Box,4:3 Full, 16:9 Wide Screen , 16:9 PillarBox or Auto to
get the maximum display when watching TV.
Resolution
If the video does not appear correctly, change the setting. This setting
is to match the most common setting for HDMI.
[480i] for NTSC system TV.
[480P]: for NTSC system TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
[1080P]: for NTSC or PAL system TV.
TV format
If the video does not appear correctly, you need to change the
settings. This should match the most common setting f
or TVs in your
country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
Auto Search
Search and install all channels automatically. This option
overwrites all preset channels.
1. Select [Auto Search] and press OK or RIGHT to start channel
search.
2. To cancel channel search, press EXIT.
2. Press the RIGHT/LEFT key to select the channel frequency.
3. Press OK to start searching channels.
If a channel is found, it is saved and added to the channels list. If
channels cant be found, then exit the menu.
Country
Select your country of residence.
Manual Search
Install new channels manually. This option adds new channels
without changing the current channels list.
1. Select [Manual Search] then press OK or RIGHT. The channel
search screen will appear.
To access the Menu,press MENU then select [Time]. The Menu
provides options to adjust the time settings.
elect an option and press RIGHT/LEFT to adjust the
settings.Press EXIT to exit the menu.
Time Setting
Press UP/DOWN to
s
Time offset
Country Region
Country Region is set automatically when you set the country at channel
Select auto or manual for GMT offset adjustments.
Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
search menu.
8
001 Ideal World
001 Q
002 Magic
003 The Hits Radio
004 BBC World Sv.
005 oneword
006 JAZZFM
007 Kerrang!
008 Smash Hits!
009 Kiss
002 UKTV Br’ildeas
003 TMF
004 The HITS
Channel Search
Manual Search
Progress
818.0MHz/8MHZ
DTV:004 Radio: 009
SkipExit
EXIT
MENU
Quality
Frequency channel 21
Frequency(MHZ) 474.0
Bandwidth: 8M
ENGLISH
ENGLISH
Auto Search
Search and install all channels automatically. This option overwrites all preset
channels.
1. Select [Auto Search] and press OK or RIGHT to start channel search.
2. To cancel channel search, press EXIT.
Manual Search
Install new channels manually. This option adds new channels without
changing the current channels list.
1. Select [Manual Search] then press OK or RIGHT. The channel search screen
will appear.
2. Press the RIGHT/LEFT key to select the channel frequency.
3. Press OK to start searching channels.
If a channel is found, it is saved and added to the channels list. If channels
can’t be found, then exit the menu.
Country
Select your country of residence.
Time Setting
To access the Menu, press MENU then select [Time].
The Menu provides options to adjust the time settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the menu.
Time oset
Select auto or manual for GMT oset adjustments.
Country Region
Country Region is set automatically when you set the country at channel
search menu.
Time Zone
Select the Time Zone Oset when [Time Oset] is set to Manual.
Auto Search
Search and install all channels automatically. This option
overwrites all preset channels.
1. Select [Auto Search] and press OK or RIGHT to start channel
search.
2. To cancel channel search, press EXIT.
2. Press the RIGHT/LEFT key to select the channel frequency.
3. Press OK to start searching channels.
If a channel is found, it is saved and added to the channels list. If
channels cant be found, then exit the menu.
Country
Select your country of residence.
Manual Search
Install new channels manually. This option adds new channels
without changing the current channels list.
1. Select [Manual Search] then press OK or RIGHT. The channel
search screen will appear.
To access the Menu,press MENU then select [Time]. The Menu
provides options to adjust the time settings.
elect an option and press RIGHT/LEFT to adjust the
settings.Press EXIT to exit the menu.
Time Setting
Press UP/DOWN to
s
Time offset
Country Region
Country Region is set automatically when you set the country at channel
Select auto or manual for GMT offset adjustments.
Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
search menu.
8
001 Ideal World
001 Q
002 Magic
003 The Hits Radio
004 BBC World Sv.
005 oneword
006 JAZZFM
007 Kerrang!
008 Smash Hits!
009 Kiss
002 UKTV Br’ildeas
003 TMF
004 The HITS
Channel Search
Manual Search
Progress
818.0MHz/8MHZ
DTV:004 Radio: 009
SkipExit
EXIT
MENU
Quality
Frequency channel
21
Frequency(MHZ) 474.0
Bandwidth: 8M
Option
To access the Menu,press SETUP and select [Option]. The menu
provides options to adjust the OSD Language, Subtitle Language
and Audio Language. Select an option and press RIGHT/LEFT to
adjust the setting.Press EXIT to exit The Menu.
System Setting
To access the Menu,press SETUP and select [System].The menu.
Provides options to adjust the system settings. Press the
UP/DOWN key to select an option and press RIGHT/LEFT to adjust
the setting.Press EXIT to exit the Menu.
OSD Language
Audio Language
Select the preferred audio language for watching TV channels.If
the language is not available, the default program language will be
used.
Subtitle Language
Select an OSD language.
Select the preferred subtitle language.
Set Password
Restore Factory Default
Information
View model, hardware and software information.
Set or change the password for Locked programs. Enter your old
You can restrict access to channels that are unsuitable for children.
To restrict/lock the channel you will need to enter either the default
password '000000' or your own password.
Password or the default password '000000'. You will then be asked
to enter your new password. To confirm re-enter your new
password. Once it is confirmed, press EXIT to exit the Menu.
Reset your Set Top Box to the Default Factory Settings.In Main
Menu select [Restore Factory Default] and press OK or RIGHT to
select. Enter your password or the default password '000000' and
press OK to confirm. This option will delete all preset channels and
settings.
Software update
Software update
9
Parental Guidance
Digital Audio
Set the desired audio format at the HDMI slot: PCM, Raw HDIM On,
Raw HDMI Off, Off (if available).
ENGLISH
ENGLISH
Option
To access the Menu, press SETUP and select [Option]. The menu provides
options to adjust the OSD Language, Subtitle Language and Audio Language.
Select an option and press RIGHT/LEFT to adjust the setting.
Press EXIT to exit The Menu.
OSD Language
Select an OSD language.
Audio Language
Select the preferred audio language for watching TV channels.If
the language is not available, the default program language will be
used.
Subtitle Language
Select the preferred subtitle language.
Digital Audio
Set the desired audio format at the HDMI slot: PCM, Raw HDMI On,
Raw HDMI O, O (if available).
System Setting
To access the Menu, press SETUP and select [System]. The menu provides
options to adjust the system settings. Press the UP/DOWN key to select an
option and press RIGHT/LEFT to adjust the setting.
Press EXIT to exit the menu.
Parental Guidance
You can restrict access to channels that are unsuitable for children.
To restrict / lock the channel you will need to enter either the default
password ‘000000’ or your own password.
Set Password
Set or change the password for Locked programs. Enter your old
Password or the default password ‘000000’. You will then be asked
to enter your new password. To conrm re-enter your new
password. Once it is conrmed, press EXIT to exit the Menu.
Restore Factory Default
Reset your Set Top Box to the Default Factory Settings. In Main
Menu select [Restore Factory Default] and press OK or RIGHT to
select. Enter your password or the default password ‘000000’ and
press OK to conrm. This option will delete all preset channels and
settings.
Information
View model, hardware and software information.
Software update
Software update.
Option
To access the Menu,press SETUP and select [Option]. The menu
provides options to adjust the OSD Language, Subtitle Language
and Audio Language. Select an option and press RIGHT/LEFT to
adjust the setting.Press EXIT to exit The Menu.
System Setting
To access the Menu,press SETUP and select [System].The menu.
Provides options to adjust the system settings. Press the
UP/DOWN key to select an option and press RIGHT/LEFT to adjust
the setting.Press EXIT to exit the Menu.
OSD Language
Audio Language
Select the preferred audio language for watching TV channels.If
the language is not available, the default program language will be
used.
Subtitle Language
Select an OSD language.
Select the preferred subtitle language.
Set Password
Restore Factory Default
Information
View model, hardware and software information.
Set or change the password for Locked programs. Enter your old
You can restrict access to channels that are unsuitable for children.
To restrict/lock the channel you will need to enter either the default
password '000000' or your own password.
Password or the default password '000000'. You will then be asked
to enter your new password. To confirm re-enter your new
password. Once it is confirmed, press EXIT to exit the Menu.
Reset your Set Top Box to the Default Factory Settings.In Main
Menu select [Restore Factory Default] and press OK or RIGHT to
select. Enter your password or the default password '000000' and
press OK to confirm. This option will delete all preset channels and
settings.
Software update
Software update
9
Parental Guidance
Digital Audio
Set the desired audio format at the HDMI slot: PCM, Raw HDIM On,
Raw HDMI Off, Off (if available).
10
USB
To access the Menu, press the SETUP button and select USB.
Multi-Media
Switch to USB mode and plug in USB to view files.
Troubleshooting
The image stopped
suddenly or mosaic
Problem Potential Reasons What to do
No picture
Power isn't connected
Connect the power
The power switch
is not on
Switch on the power
Screen shows
No Signal
DVB-T cable not
Plug in the DVB-T cable
Incorrect setting
Reset setting
No sound from
speaker
No or incorrect
connection
with audio cable
Connect the audio
correctly
Sound on mute
Turn off mute function
Incorrect sound track Try another sound track
Only sound, no
image on the
screen
No or incorrect connection
with AV cable
Make sure cables
connected correctly
The program is a radio
program
Press <TV/RADIO> key
shift into TV mode
Remote Control
is not responding
The battery is exhausted
Change battery
Remote Control is not
facing or close enough
to the Set Top Box
Adjust the position
Remote Control and
closer to the unit
The signal is too weak
Strengthen the signal
cable
are
to
of the
move
connected
Technical Specifications
Video
Decoder Format
MPEG4 AVC/H.264 HP@L4
MPEG2 MP@ML.HL
Output Port
CVBS,HDMI
Audio
Decoder Format
MPEG-1 (layer1&2 )&3
Audio output
Stereo
Power
Voltage
DC 9V (1.5 A)
Working Power
10W
Item Sub Item Parameter
Tuner
Input Frequency
170~230MHz
470~860MHz
RF Input level
-25~-80dBm (64QAM)
-10~-75dBm (256QAM)
IF Bandwidth
7MHz and 8MHz
Modulation
QPSK,16QAM,64QAM,256QAM
HEVC/H.265 HT@L4
Photo Configure
Set the parameters for viewing photographs.
Movie Configure
Set the parameters for displaying movie subtitles.
PVR Configure
Set the parameters for record device.
ENGLISH
ENGLISH
USB
To access the Menu, press the SETUP button and select USB.
Multi-Media
Switch to USB mode and plug in USB to view les.
Photo Congure
Set the parameters for viewing photographs.
Movie Congure
Set the parameters for displaying movie subtitles.
PVR Congure
Set the parameters for record device.
10
USB
To access the Menu, press the SETUP button and select USB.
Multi-Media
Switch to USB mode and plug in USB to view files.
Troubleshooting
The image stopped
suddenly or mosaic
Problem Potential Reasons What to do
No picture
Power isn't connected
Connect the power
The power switch
is not on
Switch on the power
Screen shows
No Signal
DVB-T cable not
Plug in the DVB-T cable
Incorrect setting
Reset setting
No sound from
speaker
No or incorrect
connection
with audio cable
Connect the audio
correctly
Sound on mute
Turn off mute function
Incorrect sound track Try another sound track
Only sound, no
image on the
screen
No or incorrect connection
with AV cable
Make sure cables
connected correctly
The program is a radio
program
Press <TV/RADIO> key
shift into TV mode
Remote Control
is not responding
The battery is exhausted
Change battery
Remote Control is not
facing or close enough
to the Set Top Box
Adjust the position
Remote Control and
closer to the unit
The signal is too weak
Strengthen the signal
cable
are
to
of the
move
connected
Technical Specifications
Video
Decoder Format
MPEG4 AVC/H.264 HP@L4
MPEG2 MP@ML.HL
Output Port
CVBS,HDMI
Audio
Decoder Format
MPEG-1 (layer1&2 )&3
Audio output
Stereo
Power
Voltage
DC 9V (1.5 A)
Working Power
10W
Item Sub Item Parameter
Tuner
Input Frequency
170~230MHz
470~860MHz
RF Input level
-25~-80dBm (64QAM)
-10~-75dBm (256QAM)
IF Bandwidth
7MHz and 8MHz
Modulation
QPSK,16QAM,64QAM,256QAM
HEVC/H.265 HT@L4
Photo Configure
Set the parameters for viewing photographs.
Movie Configure
Set the parameters for displaying movie subtitles.
PVR Configure
Set the parameters for record device.
10
USB
To access the Menu, press the SETUP button and select USB.
Multi-Media
Switch to USB mode and plug in USB to view files.
Troubleshooting
The image stopped
suddenly or mosaic
Problem Potential Reasons What to do
No picture
Power isn't connected
Connect the power
The power switch
is not on
Switch on the power
Screen shows
No Signal
DVB-T cable not
Plug in the DVB-T cable
Incorrect setting
Reset setting
No sound from
speaker
No or incorrect
connection
with audio cable
Connect the audio
correctly
Sound on mute
Turn off mute function
Incorrect sound track Try another sound track
Only sound, no
image on the
screen
No or incorrect connection
with AV cable
Make sure cables
connected correctly
The program is a radio
program
Press <TV/RADIO> key
shift into TV mode
Remote Control
is not responding
The battery is exhausted
Change battery
Remote Control is not
facing or close enough
to the Set Top Box
Adjust the position
Remote Control and
closer to the unit
The signal is too weak
Strengthen the signal
cable
are
to
of the
move
connected
Technical
Specifications
Video
Decoder Format
MPEG4 AVC/H.264 HP@L4
MPEG2 MP@ML.HL
Output Port
CVBS,HDMI
Audio
Decoder Format
MPEG-1 (layer1&2 )&3
Audio output
Stereo
Power
Voltage
DC 9V (1.5 A)
Working Power
10W
Item Sub Item Parameter
Tuner
Input Frequency
170~230MHz
470~860MHz
RF Input level
-25~-80dBm (64QAM)
-10~-75dBm (256QAM)
IF Bandwidth
7MHz and 8MHz
Modulation
QPSK,16QAM,64QAM,256QAM
HEVC/H.265 HT@L4
Photo Configure
Set the parameters for viewing photographs.
Movie Configure
Set the parameters for displaying movie subtitles.
PVR Configure
Set the parameters for record device.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Identification of Controls
Remote control unit
1.POWER
On/off the power supply
2.VOL -
Adjust VOLUME.
3.0-9 NUMBER BUTTON
Selects numbered items in a menu.
4.SUBTITLE
Press SUBTITLE repeatedly during playback to viwe a different
subtitle languages , if avilable.
5.ZOOM
JPEG: Use ZOOM to enlarge or shrink the picture.
Each press of the ZOOM button change the TV screen
6.REC
Record digital service.
7.ENTER
Confirm and Enter
8.
SETUP
Main Menu/Return
9.FAV
Open Favorite Programs List Menu
10.TV/RADIAO
Switch between TV and Radio source
11.EXIT
12.DISPLAY
Displa
y the information of the current signal
13.SOURCE
DVD/USB
14.VOL +
Adjust VOLUME.
15.REPEAT
Repeat Play mp3 and video
3
1 2
3
4
5
6 7 8
9 0
ENTER
SOURCE
MODE
MUTE
REPEAT
FAV
TV/RADIO
EXIT
VOL- VOL+
POWER
REC
TTX EPG
ZOOM
1
2
3
4
6
7
8
9
10
11
12
13
14
16
15
19
18
17
20
21
22
24
25
23
26
27
28
5
1. POWER
Aan / uit
2. VOL -
Pas VOLUME aan.
3. 0-9 NUMMERKNOP
Selecteert genummerde items in een
menu.
4. SUBTITLE
Druk tijdens het afspelen herhaaldelijk
op SUBTITLE om een andere ondertite-
ling te bekijken, indien beschikbaar.
5. ZOOM
JPEG: gebruik ZOOM om de afbeelding
te vergroten of verkleinen.
Telkens wanneer u op de knop ZOOM
drukt, verandert het tv-scherm
6. REC
Record digitale service.
7. ENTER
Bevestig en Enter
8. SETUP
Hoofdmenu / Terug
9. FAV
Lijst met favoriete programma’s openen
10. TV / RADIO
Wissel tussen tv en radio
11. EXIT
12. DISPLAY
Geef de informatie van het huidige
signaal weer
13. SOURCE
USB / TV
14. VOL +
Pas VOLUME aan.
15. Herhaal
Herhaal MP3 en video afspelen
16. MUTE
Demp het geluid
17. AUDIO
Druk tijdens het afspelen herhaaldelijk
op AUDIO om een ander geluid te horen
taal of audiotrack, indien beschikbaar.
18. MODE
Instelling mode menu
19. STOP
20. PLAY / PAUZE
21. RETURN
22. TTX
teletekst
23. EPG
Toon EPG-informatie
24. KNOP
Vorige optie.
25. KNOP
Volgende optie.
26. KNOP
Snel vooruit
27. KNOP
Snel achteruit
28. rood / groen / geel / blauw
Een specieke functie
NEDERLANDS
NEDERLANDS
Aanduiding van bedieningselementen
Afstandsbediening
Page is loading ...
Basic Operation
5
First Time Installation
After all connections have been made properly, switch on TV and
make sure the receiver is connected to the Main Power. Press Power
button to switch receiver on. If you are using the receiver for the first
time or restored to Factory Default, the Main Menu will appear on
your TV screen.
(1) Select [OSD Language] and press RIGHT/LEFT key to select an
language.
(2) Select [Country] and press RIGHT/LEFT key to select your
country of residence.
(3) Select [Channel Search] and press RIGHT or OK key to begin
Automatic channel search.
(4) Once channel tuning is complete, you are now ready to watch TV.
To access the Menu, press the SETUP button and select [Program].
The Menu provides options to adjust theProgram Manage Settings.
Select an option and press OK or RIGHT to adjust that setting.
Press the EXIT button to exit the Menu.
To edit your program preferences (lock, skip, favourite, move or
delete), you will need to enter the Program Edit Menu. This Menu
requires a password to access. Enter the default password '000000'.
Program Edit
Program Edit
ALL TV
< >
018 The HITS
019 UKTV Br’tideas
021 TMF
022 Ideal World
01:00.01:00
17:00-19:00 StarDate
Rename
GOTO
Lock DeleteSkip FAVMove
FAV
Program Manage Settings
Nadat alle verbindingen correct zijn gemaakt, schakelt u de TV AAN en
zorg ervoor dat de ontvanger op de hoofdvoeding is aangesloten. Druk op
Power om de ontvanger AAN te zetten. Als u de ontvanger voor de eerste keer
gebruikt of wordt hersteld naar fabrieksinstellingen, verschijnt het hoofdmenu
op uw tv-scherm.
(1) Selecteer [OSD-taal] en druk op de RIGHT / LEFT-toets om een taal te
selecteren.
(2) Selecteer [Land] en druk op de RIGHT / LEFT-toets om uw land te selecteren
residentie.
(3) Selecteer [Kanaal zoeken] en druk op de RIGHT- of OK-toets om te beginnen
met automatisch zoeken naar kanalen.
(4) Nadat het afstemmen van het kanaal voltooid is, bent u nu klaar om TV te
kijken.
Eerste installatie
Basis operatie
Programma beheer instellingen
Om toegang te krijgen tot het menu, drukt u op de knop SETUP en
selecteert u [Programma].
Het menu biedt opties om de programma-instellingen te wijzigen.
Selecteer een optie en druk op OK of op RIGHT om die instelling aan te
passen. Druk op de knop EXIT om het menu te verlaten.
Programma bewerken
Om uw programmavoorkeuren te bewerken (vergrendelen, overslaan,
favoriet, verplaatsen of delete), moet u het Program Edit Menu openen.
Dit menu vereist een wachtwoord om toegang te krijgen. Voer het
standaard wachtwoord ‘000000’ in.
Basic Operation
5
First Time Installation
After all connections have been made properly, switch on TV and
make sure the receiver is connected to the Main Power. Press Power
button to switch receiver on. If you are using the receiver for the first
time or restored to Factory Default, the Main Menu will appear on
your TV screen.
(1) Select [OSD Language] and press RIGHT/LEFT key to select an
language.
(2) Select [Country] and press RIGHT/LEFT key to select your
country of residence.
(3) Select [Channel Search] and press RIGHT or OK key to begin
Automatic channel search.
(4) Once channel tuning is complete, you are now ready to watch TV.
To access the Menu, press the SETUP button and select [Program].
The Menu provides options to adjust theProgram Manage Settings.
Select an option and press OK or RIGHT to adjust that setting.
Press the EXIT button to exit the Menu.
To edit your program preferences (lock, skip, favourite, move or
delete), you will need to enter the Program Edit Menu. This Menu
requires a password to access. Enter the default password '000000'.
Program Edit
Program Edit
ALL TV
< >
018 The HITS
019 UKTV Br’tideas
021 TMF
022 Ideal World
01:00.01:00
17:00-19:00 StarDate
Rename
GOTO
Lock DeleteSkip FAVMove
FAV
Program Manage Settings
Basic Operation
5
First Time Installation
After all connections have been made properly, switch on TV and
make sure the receiver is connected to the Main Power. Press Power
button to switch receiver on. If you are using the receiver for the first
time or restored to Factory Default, the Main Menu will appear on
your TV screen.
(1) Select [OSD Language] and press RIGHT/LEFT key to select an
language.
(2) Select [Country] and press RIGHT/LEFT key to select your
country of residence.
(3) Select [Channel Search] and press RIGHT or OK key to begin
Automatic channel search.
(4) Once channel tuning is complete, you are now ready to watch TV.
To access the Menu, press the SETUP button and select [Program].
The Menu provides options to adjust theProgram Manage Settings.
Select an option and press OK or RIGHT to adjust that setting.
Press the EXIT button to exit the Menu.
To edit your program preferences (lock, skip, favourite, move or
delete), you will need to enter the Program Edit Menu. This Menu
requires a password to access. Enter the default password '000000'.
Program Edit
Program Edit
ALL TV
< >
018 The HITS
019 UKTV Br’tideas
021 TMF
022 Ideal World
01:00.01:00
17:00-19:00 StarDate
Rename
GOTO
Lock DeleteSkip FAVMove
FAV
Program Manage Settings
NEDERLANDS
NEDERLANDS
6
Set Favourite Program/s
You can create a shortlist of favourite programs that you can easily
access.Set Favourite TV or Radio program:
1.Select the preferred program then press the PAVOURITE button.
A heart-shaped symbol will appear and the program is marked as a
favourite.
2.Repeat the previous step to select more Favourite programs.
3.To confirm and exit the Menu,press the EXIT key.
Disable Favourite TV or Radio Program:
Press the FAV buton on the Remote Control with the heart-shaped
symbol.
View Favourite Programs:
1.Press the Fav button and the Favou
rite Menu will appear.
2.Press UP/DOWN to selest your Favourite Programs.
3.Press OK to select your favourite program.
Delete a TV or Radio Program/s
1.Select the Program and then press the BLUE button A message
will appear.Press OK to delete the program.
2.Repeat the previous step to select more programs to delete.
Skip TV or Radio Program/s
1.Select the program you would like to skip and press the GREEN
button A skip symbol is displayed. The program is marked as a
skip.
2.Repeat the previous step to select more programs.
3.To confirm and exit themenu,press EXIT key.
Di
sable a skip TV or Radio Program:
Press the GREEN button on the skip program with the skip symbol.
Move a TV or Radio Program/s
1. Select the preferred program then press the RED button. A
move symbolwill appear.
2. Press UP/DOWN to move the program.
3. Press OK to confirm.
4. Repeat the above steps to move more channels .
Lock Program/s
You can lock selected programs for restricted view.
Lock a TV or Radio Program:
1.Select the preferred program then press the YELLOW button. A
lock-shaped symbol is displayed. The program is now marked as
locked.
2. Repeat the prev
ious step to select more programs .
3. To confirm and exit the menu, press the EXIT button.
4. Press the YELLOW button to disable the locked program.
5. To view the locked program, you will be require to enter either
the default.
First Time Installation
EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows scheduled programs
seven days in advance for every tuned channel. Press the EPG
button on the Remote Control to access guide.
You can use the UP/DOWN key to select the preferred program. If
there is more than one page of information, use the BLUE button
for page up and the YELLOW button for page down.
Program Guide
002 UKTV Br’tldeas Fri. 19 Nov 2004 16:59
Street Café
< >
19 Nov 16:30-17:00 Street Cafe
19 Nov 17:30-18:00 Gardens Unplugged
19 Nov 18:00-18:30 Water Gardens
19 Nov 18:30-18:59 Garden ER
19 Nov 18:59-19:01 UK Bright Ideas
19 Nov 19:01-00:59 UK Bright Ideas
20 Nov 00:59-06:59 UK Bright Ideas
20 Nov 06:59-07:01 UKTV Bright Ideas
20 Nov 07:01-07:25 Style Street
20 Nov 07:25-07:30 Too Good to Eat
19 Nov 17:00-17:30 Good Food Bites
Amusement
Salvador: Series in which
Dan Roland travels the world
sampling the best authentic
street food. This edition
comes from Salvador.
Page: 1 / 1
Page Down Page Up
Book Book LIST
OK INFO
Eerste installatie
Stel favoriete programma’s in
U kunt een lijst met favoriete programma’s maken die u gemakkelijk kunt
openen. Stel favoriete tv- of radioprogramma in:
1. Selecteer het gewenste programma en druk vervolgens op de
FAVORITE-knop. Er verschijnt een hartvormig symbool en het programma is
gemarkeerd als favoriet.
2. Herhaal de vorige stap om meer favoriete programma’s te selecteren.
3. Druk op de toets EXIT om te bevestigen en het menu te verlaten.
Schakel het tv-programma of het radioprogramma uit:
Druk op de FAV-knop op de afstandsbediening met het hartvormige symbool.
Favoriete programma’s bekijken:
1. Druk op de knop Fav en het Favorite-menu verschijnt.
2. Druk op UP / DOWN om uw favoriete programma’s te selecteren.
3. Druk op OK om uw favoriete programma te selecteren.
Verwijder een tv- of radioprogramma
1. Selecteer het programma en druk vervolgens op de BLAUWE knop Er wordt
een bericht weergegeven. Druk op OK om het programma te verwijderen.
2. Herhaal de vorige stap om meer programma’s te selecteren om
te verwijderen.
Sla tv- of radioprogramma’s over
1. Selecteer het programma dat u wilt overslaan en druk op de GROENE toets.
Een symbool voor een overslaan wordt weergegeven. Het programma is
gemarkeerd als een overslaan.
2. Herhaal de vorige stap om meer programma’s te selecteren.
3. Druk op de EXIT-toets om te bevestigen en het menu te verlaten.
Schakel een skip-tv of radioprogramma uit:
Druk op de GROENE knop in het skip-programma met het skip-symbool.
Verplaats een tv- of radioprogramma
1. Selecteer het gewenste programma en druk vervolgens op de RODE knop. Er
verschijnt een verplaatsingssymbool.
2. Druk op UP / DOWN om het programma te verplaatsen.
3. Druk op OK om te bevestigen.
4. Herhaal de bovenstaande stappen om meer kanalen te verplaatsen.
Vergrendel programmas
U kunt geselecteerde programma’s vergrendelen.
Vergrendel een tv- of radioprogramma:
1. Selecteer het gewenste programma en druk op de GELE knop. Een
slotvormig symbool wordt weergegeven. Het programma is nu
gemarkeerd als vergrendeld.
2. Herhaal de vorige stap om meer programma’s te selecteren.
3. Druk op de knop EXIT om te bevestigen en het menu te verlaten.
4. Druk op de GELE knop om het vergrendelde programma uit te
schakelen.
5. Om het vergrendelde programma te bekijken, moet u het
wachtwoord invoeren.
EPG (elektronische programmagids)
De EPG is een tv-gids op het scherm met geplande programma’s
zeven dagen van tevoren voor elk afgestemd kanaal. Druk op de EPG
op de afstandsbediening om de gids te openen.
U kunt de OMHOOG / OMLAAG-toets gebruiken om het gewenste
programma te selecteren. Als er meer dan één pagina met infor-
matie is, gebruik dan de BLAUWE knop voor pagina omhoog en de
GELE knop voor pagina omlaag.
NEDERLANDS
NEDERLANDS
Sort
Video Setting
Channel Search
LCN (Logical channel number)
7
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order.
[Name] - Sort the channels in alphabetical order.
[Service ID] - Sort the channels according to the station.
To access the Menu, press SETUP then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust that setting. Press
EXIT to exit the menu.
To access the menu, press SETUP and select [Search Channel].
The Menu provides options to adjust the Search Channel settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
Set LCN on or off.
Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3
L
etter Box,4:3 Full, 16:9 Wide Screen , 16:9 PillarBox or Auto to
get the maximum display when watching TV.
Resolution
If the video does not appear correctly, change the setting. This setting
is to match the most common setting for HDMI.
[480i] for NTSC system TV.
[480P]: for NTSC system TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
[1080P]: for NTSC or PAL system TV.
TV format
If the video does not appear correctly, you need to change the
settings. This should match the most common setting f
or TVs in your
country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
Soort
Sorteer uw kanalen uit de volgende opties:
[LCN] - Sorteer de kanalen in oplopende volgorde.
[Naam] - Sorteer de kanalen in alfabetische volgorde.
[Service ID] - Sorteer de kanalen op basis van het station.
LCN (logisch kanaalnummer)
Stel LCN in of uit.
Video-instelling
Om toegang te krijgen tot het menu, drukt u op SETUP en selecteert u [Beeld].
Het menu biedt opties om de video-instellingen aan te passen. Druk op UP /
DOWN om selecteer een optie en druk op RECHTS / LINKS om die instelling aan
te passen. druk op EXIT om het menu te verlaten.
Beeldverhouding
U moet het weergaveformaat instellen op 4: 3 PanScan, 4: 3
Letter Box, 4: 3 Full, 16: 9 Wide Screen, 16: 9 PillarBox of Auto zodat je de
de maximale weergave krijgt wanneer je tv kijkt.
Resolutie
Als de video niet correct wordt weergegeven, wijzigt u de instelling. Deze instelling
is om de meest gebruikelijke instelling voor HDMI aan te passen.
[480i]: voor NTSC-systeem-tv.
[480P]: voor NTSC-systeem-tv.
[576i]: voor PAL-systeem-tv.
[576P]: voor PAL-systeem-tv.
[720P]: voor NTSC- of PAL-systeem-tv.
[1080I]: voor NTSC- of PAL-systeem-tv.
[1080P]: voor NTSC- of PAL-systeem-tv.
Tv-formaat
Als de video niet correct wordt weergegeven, moet u de instellingen. Dit moet
overeenkomen met de meest gebruikelijke instelling voor tv’s in uw land.
[NTSC]: voor NTSC-systeem-tv.
[PAL]: voor PAL-systeem-tv.
Kanalen zoeken
Om toegang te krijgen tot het menu, drukt u op SETUP en selecteert
u [Search Channel].
Het menu biedt opties om de zoekkanaalinstellingen aan te passen.
Selecteer een optie en druk op RECHTS / LINKS om de instellingen aan te passen.
Druk op EXIT om het menu te verlaten.
Sort
Video Setting
Channel Search
LCN (Logical channel number)
7
Sort your channels from the following options:
[LCN] - Sort the channels in ascending order.
[Name] - Sort the channels in alphabetical order.
[Service ID] - Sort the channels according to the station.
To access the Menu, press SETUP then select [Picture]. The Menu
provides options to adjust the video settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust that setting. Press
EXIT to exit the menu.
To access the menu, press SETUP and select [Search Channel].
The Menu provides options to adjust the Search Channel settings.
Select an option and press RIGHT/LEFT to adjust the settings.
Press EXIT to exit the Menu.
Set LCN on or off.
Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3
L
etter Box,4:3 Full, 16:9 Wide Screen , 16:9 PillarBox or Auto to
get the maximum display when watching TV.
Resolution
If the video does not appear correctly, change the setting. This setting
is to match the most common setting for HDMI.
[480i] for NTSC system TV.
[480P]: for NTSC system TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
[1080P]: for NTSC or PAL system TV.
TV format
If the video does not appear correctly, you need to change the
settings. This should match the most common setting f
or TVs in your
country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
NEDERLANDS
NEDERLANDS
Auto Search
Search and install all channels automatically. This option
overwrites all preset channels.
1. Select [Auto Search] and press OK or RIGHT to start channel
search.
2. To cancel channel search, press EXIT.
2. Press the RIGHT/LEFT key to select the channel frequency.
3. Press OK to start searching channels.
If a channel is found, it is saved and added to the channels list. If
channels cant be found, then exit the menu.
Country
Select your country of residence.
Manual Search
Install new channels manually. This option adds new channels
without changing the current channels list.
1. Select [Manual Search] then press OK or RIGHT. The channel
search screen will appear.
To access the Menu,press MENU then select [Time]. The Menu
provides options to adjust the time settings.
elect an option and press RIGHT/LEFT to adjust the
settings.Press EXIT to exit the menu.
Time Setting
Press UP/DOWN to
s
Time offset
Country Region
Country Region is set automatically when you set the country at channel
Select auto or manual for GMT offset adjustments.
Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
search menu.
8
001 Ideal World
001 Q
002 Magic
003 The Hits Radio
004 BBC World Sv.
005 oneword
006 JAZZFM
007 Kerrang!
008 Smash Hits!
009 Kiss
002 UKTV Br’ildeas
003 TMF
004 The HITS
Channel Search
Manual Search
Progress
818.0MHz/8MHZ
DTV:004 Radio: 009
SkipExit
EXIT
MENU
Quality
Frequency channel 21
Frequency(MHZ) 474.0
Bandwidth: 8M
Automatisch zoeken
Zoek en installeer alle kanalen automatisch. Met deze optie worden alle vooraf
ingestelde kanalen overschreven.
1. Selecteer [Auto Search] en druk op OK of RIGHT om het zoeken naar kanalen
te starten.
2. Druk op EXIT om het zoeken naar zenders te annuleren.
Handmatig zoeken
Installeer nieuwe kanalen handmatig. Met deze optie worden nieuwe kanalen
toegevoegd zonder de lijst met huidige kanalen wijzigen.
1. Selecteer [Handmatig zoeken] en druk vervolgens op OK of op RIGHT. Het
kanaalzoekscherm verschijnt.
2. Druk op de RIGHT / LEFT-toets om de kanaalfrequentie te selecteren.
3. Druk op OK om kanalen te zoeken.
Als een kanaal wordt gevonden, wordt het opgeslagen en toegevoegd aan
de lijst met kanalen. Als kanalen niet kunnen worden gevonden, verlaat u het
menu.
Land
Selecteer uw land van verblijf.
Tijd instelling
Om toegang te krijgen tot het Menu, drukt u op MENU en selecteert u [Tijd].
Het menu biedt opties om de tijdinstellingen aan te passen.
Selecteer een optie en druk op RECHTS / LINKS om de instellingen aan te passen.
Druk op EXIT om het menu te verlaten.
Tijdverschuiving
Selecteer auto of handmatig voor aanpassingen van GMT-oset.
Land Regio
Landregio wordt automatisch ingesteld wanneer u het land instelt in het ‘kanaal
zoek menu’.
Tijdzone
Selecteer de tijdzone-oset wanneer [Tijdverschuiving] is ingesteld op Handmatig.
Auto Search
Search and install all channels automatically. This option
overwrites all preset channels.
1. Select [Auto Search] and press OK or RIGHT to start channel
search.
2. To cancel channel search, press EXIT.
2. Press the RIGHT/LEFT key to select the channel frequency.
3. Press OK to start searching channels.
If a channel is found, it is saved and added to the channels list. If
channels cant be found, then exit the menu.
Country
Select your country of residence.
Manual Search
Install new channels manually. This option adds new channels
without changing the current channels list.
1. Select [Manual Search] then press OK or RIGHT. The channel
search screen will appear.
To access the Menu,press MENU then select [Time]. The Menu
provides options to adjust the time settings.
elect an option and press RIGHT/LEFT to adjust the
settings.Press EXIT to exit the menu.
Time Setting
Press UP/DOWN to
s
Time offset
Country Region
Country Region is set automatically when you set the country at channel
Select auto or manual for GMT offset adjustments.
Time Zone
Select the Time Zone Offset when [Time Offset] is set to Manual.
search menu.
8
001 Ideal World
001 Q
002 Magic
003 The Hits Radio
004 BBC World Sv.
005 oneword
006 JAZZFM
007 Kerrang!
008 Smash Hits!
009 Kiss
002 UKTV Br’ildeas
003 TMF
004 The HITS
Channel Search
Manual Search
Progress
818.0MHz/8MHZ
DTV:004 Radio: 009
SkipExit
EXIT
MENU
Quality
Frequency channel
21
Frequency(MHZ) 474.0
Bandwidth: 8M
NEDERLANDS
NEDERLANDS
Option
To access the Menu,press SETUP and select [Option]. The menu
provides options to adjust the OSD Language, Subtitle Language
and Audio Language. Select an option and press RIGHT/LEFT to
adjust the setting.Press EXIT to exit The Menu.
System Setting
To access the Menu,press SETUP and select [System].The menu.
Provides options to adjust the system settings. Press the
UP/DOWN key to select an option and press RIGHT/LEFT to adjust
the setting.Press EXIT to exit the Menu.
OSD Language
Audio Language
Select the preferred audio language for watching TV channels.If
the language is not available, the default program language will be
used.
Subtitle Language
Select an OSD language.
Select the preferred subtitle language.
Set Password
Restore Factory Default
Information
View model, hardware and software information.
Set or change the password for Locked programs. Enter your old
You can restrict access to channels that are unsuitable for children.
To restrict/lock the channel you will need to enter either the default
password '000000' or your own password.
Password or the default password '000000'. You will then be asked
to enter your new password. To confirm re-enter your new
password. Once it is confirmed, press EXIT to exit the Menu.
Reset your Set Top Box to the Default Factory Settings.In Main
Menu select [Restore Factory Default] and press OK or RIGHT to
select. Enter your password or the default password '000000' and
press OK to confirm. This option will delete all preset channels and
settings.
Software update
Software update
9
Parental Guidance
Digital Audio
Set the desired audio format at the HDMI slot: PCM, Raw HDIM On,
Raw HDMI Off, Off (if available).
Optie
Om toegang te krijgen tot het menu, drukt u op SETUP en selecteert u [Optie].
Het menu biedt opties om de OSD-taal, ondertitelingstaal en audiotaal aan te
passen. Selecteer een optie en druk op RECHTS / LINKS om de instelling aan te
passen. Druk op EXIT om het menu te verlaten.
OSD-taal
Selecteer een OSD-taal.
Audiotaal
Selecteer de gewenste audiotaal voor het kijken naar tv-kanalen waarvan de
taal niet beschikbaar is, de standaard programmeertaal wordt dan gebruikt.
Taal ondertitels
Selecteer de gewenste ondertitelingstaal.
Digitaal geluid
Stel het gewenste audioformaat in op de HDMI-sleuf: PCM, Raw HDMI On,
Raw HDMI O, O (indien beschikbaar).
Systeeminstellingen
Om toegang te krijgen tot het Menu, drukt u op SETUP en selecteert u
[Systeem]. Het menu biedt opties om de systeeminstellingen aan te passen.
Druk op de knop OMHOOG / OMLAAG om een optie te selecteren en druk op
RECHTS / LINKS om de instelling aan te passen.
Druk op EXIT om het menu te verlaten.
Ouderlijke begeleiding
U kunt de toegang beperken tot kanalen die niet geschikt zijn voor kinderen.
Om het kanaal te beperken / vergrendelen, moet u het standaard wachtwoord
‘000000’, of uw eigen wachtwoord invoeren.
Stel een wachtwoord in
Stel het wachtwoord in of wijzig het voor Vergrendelde programma’s. Voer je
oude in wachtwoord of het standaard wachtwoord ‘000000’. U wordt dan
gevraagd om je nieuwe wachtwoord in te voeren. Bevestig opnieuw uw nieuwe
wachtwoord. Als het eenmaal is bevestigd, drukt u op EXIT om het menu te
sluiten.
Fabrieksinstellingen herstellen
Reset uw Set Top Box naar de standaard fabrieksinstellingen. In Main
Selecteer Menu [Fabrieksinstellingen herstellen] en druk op OK of RECHTS om te
selecteren. Voer uw wachtwoord of het standaard wachtwoord ‘000000’ in en
druk op OK om te bevestigen. Met deze optie worden alle vooraf ingestelde
kanalen en instellingen verwijderd.
Informatie
Bekijk model-, hardware- en software-informatie.
Software-update
update de software.
Option
To access the Menu,press SETUP and select [Option]. The menu
provides options to adjust the OSD Language, Subtitle Language
and Audio Language. Select an option and press RIGHT/LEFT to
adjust the setting.Press EXIT to exit The Menu.
System Setting
To access the Menu,press SETUP and select [System].The menu.
Provides options to adjust the system settings. Press the
UP/DOWN key to select an option and press RIGHT/LEFT to adjust
the setting.Press EXIT to exit the Menu.
OSD Language
Audio Language
Select the preferred audio language for watching TV channels.If
the language is not available, the default program language will be
used.
Subtitle Language
Select an OSD language.
Select the preferred subtitle language.
Set Password
Restore Factory Default
Information
View model, hardware and software information.
Set or change the password for Locked programs. Enter your old
You can restrict access to channels that are unsuitable for children.
To restrict/lock the channel you will need to enter either the default
password '000000' or your own password.
Password or the default password '000000'. You will then be asked
to enter your new password. To confirm re-enter your new
password. Once it is confirmed, press EXIT to exit the Menu.
Reset your Set Top Box to the Default Factory Settings.In Main
Menu select [Restore Factory Default] and press OK or RIGHT to
select. Enter your password or the default password '000000' and
press OK to confirm. This option will delete all preset channels and
settings.
Software update
Software update
9
Parental Guidance
Digital Audio
Set the desired audio format at the HDMI slot: PCM, Raw HDIM On,
Raw HDMI Off, Off (if available).
NEDERLANDS
NEDERLANDS
USB
Om toegang te krijgen tot het menu, drukt u op de knop SETUP en selecteert
u USB.
Multi-Media
Schakel over naar USB-modus en sluit USB aan om bestanden te bekijken.
Foto congureren
Stel de parameters in voor het bekijken van foto’s.
Film congureren
Stel de parameters in voor het weergeven van lmondertiteling.
PVR congureren
Stel de parameters in voor het opnameapparaat.
10
USB
To access the Menu, press the SETUP button and select USB.
Multi-Media
Switch to USB mode and plug in USB to view files.
Troubleshooting
The image stopped
suddenly or mosaic
Problem Potential Reasons What to do
No picture
Power isn't connected
Connect the power
The power switch
is not on
Switch on the power
Screen shows
No Signal
DVB-T cable not
Plug in the DVB-T cable
Incorrect setting
Reset setting
No sound from
speaker
No or incorrect
connection
with audio cable
Connect the audio
correctly
Sound on mute
Turn off mute function
Incorrect sound track Try another sound track
Only sound, no
image on the
screen
No or incorrect connection
with AV cable
Make sure cables
connected correctly
The program is a radio
program
Press <TV/RADIO> key
shift into TV mode
Remote Control
is not responding
The battery is exhausted
Change battery
Remote Control is not
facing or close enough
to the Set Top Box
Adjust the position
Remote Control and
closer to the unit
The signal is too weak
Strengthen the signal
cable
are
to
of the
move
connected
Technical Specifications
Video
Decoder Format
MPEG4 AVC/H.264 HP@L4
MPEG2 MP@ML.HL
Output Port
CVBS,HDMI
Audio
Decoder Format
MPEG-1 (layer1&2 )&3
Audio output
Stereo
Power
Voltage
DC 9V (1.5 A)
Working Power
10W
Item Sub Item Parameter
Tuner
Input Frequency
170~230MHz
470~860MHz
RF Input level
-25~-80dBm (64QAM)
-10~-75dBm (256QAM)
IF Bandwidth
7MHz and 8MHz
Modulation
QPSK,16QAM,64QAM,256QAM
HEVC/H.265 HT@L4
Photo Configure
Set the parameters for viewing photographs.
Movie Configure
Set the parameters for displaying movie subtitles.
PVR Configure
Set the parameters for record device.
USB
Druk op SETUP en selecteer USB om het menu te openen.
Multimedia
Eerste installatie
NED-10
Schakel naar de USB-modus en sluit een USB aan om bestanden
te bekijken.
Fotoconfiguratie
De parameters instellen voor de weergave van foto’s.
Filmconfiguratie
De parameters instellen voor de weergave van filmondertitelingen.
PVR Configure
De parameters instellen voor het opname-apparaat.
USB
Druk op SETUP en selecteer USB om het menu te openen.
Multimedia
Eerste installatie
NED-10
Schakel naar de USB-modus en sluit een USB aan om bestanden
te bekijken.
Fotoconfiguratie
De parameters instellen voor de weergave van foto’s.
Filmconfiguratie
De parameters instellen voor de weergave van filmondertitelingen.
PVR Configure
De parameters instellen voor het opname-apparaat.
NEDERLANDS
NEDERLANDS
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91

Caliber PDVBT 101 Owner's manual

PDVBT 101
Caliber
Brand
Caliber
Model
PDVBT 101
Category
LCD TVs
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents