- 17 -
Heating Element
The heating element can be activated using TEST
Mode.
The dual-wattage heating element produces 850
watts during wash, to help heat the water, and an
effective wattage due to cycling of 541 watts during
the dry cycle.
Water inlet temperature must be at least 120 F for
proper drying. Lower water inlet temperature will
prevent proper convection air movement and
increase drying time substantially.
If the problem is that the dishes are not drying
correctly, don’t overlook the rinse agent. A rinse
agent will improve the water sheeting action and
drying performance.
It is normal for the stainless steel tub and inner door
panel to retain water droplets even though the dishes
are dry.
)FBUJOHFMFNFOU4USJQ$JSDVJU
5IFIFBUJOHFMFNFOUOVUTBSFMPDBUFEPOUIFVOEFSTJEFPG
UIFXBTIFSOFBSUIFEPPS"NQMFGPSDFJTSFRVJSFEUP
SFNPWFUIFOVUT3FNPWJOHUIFEJTIXBTIFSGSPN
JOTUBMMBUJPONBZCFSFRVJSF
E
Test Mode
*OTUBOECZNPEFQVTI)*5&.1)&"5&%%3:BOE
)*5&.18"4)UIFNBDIJOFXJMMFOUFSJOUPUIFQSPDFTTPG
5FTU.PEF"GUFSFOUFSJOHUIFTFMGJOTQFDUJPONPEFBMM
MJHIUTXJMMCF
BOEUIFEJTQMBZXJMMTIPXUIFOPQFSBUF
UIFVOJUBDDPSEJOHUPUIFGPMMPXJOHPSEFS
5PVDIUIF10541"/4UIFJOMFUXBUFSWBMWFXJMM
XPSLGPSTFDPOET
5PVDIUIF/03."-UIFXBTIQVNQXJMMXPSLGPS
NJOVUFTBOETUPQGPSNJOVUFTUIFOSFQFBU
5PVDIUIF$)*/"QBE UIFEFUFSHFOUEJTQFOTFSXJMM
XPSLGPSNJOVUFBOETUPQGPSNJOVUFTUIFO
SFQFBU
5PVDIUIF4QFFEQBEUIFIFBUJOHFMFNFOUBOEXBTI
QVNQXJMMXPSLTJNVMUBOFPVTMZGPSNJOVUFBOETUPQ
GPSNJOVUFUIFOSFQFBU
5PVDIUIF3*/4&)0-%QBEUIFIFBUJOHFMFNFOUXJMM
XPSLGPSNJOVUFTBOETUPQGPSNJOVUFTUIFO
SFQFBU
5PVDIUIF4"/*5*;&3*/4&QBEUIFESBJOQVNQXJMM
XPSLGPSNJOVUFTBOETUPQGPSNJOVUFUIFO
SFQFBU
5PVDIUIF)*5&.1QBEUIFXBYNPUPSXJMMXPSLGPS
NJOVUFBOETUPQGPSNJOVUFUIFOSFQFBU
Turbidity Sensor
5IFUVSCJEJUZTFOTPSJTMPDBUFEJOUIFGSPOUPGTVNQ
Service Manual
Model No: DWL Series