Gigabyte GSmart i350 Owner's manual

Brand: Gigabyte

Model: GSmart i350

Type: Owner's manual

Getting Started

◎It may take up to several minutes for the GPS receiver to lock on 3 satellites as you first initialize

the positioning. The location information will be kept in memory and will be available the next

time you launch the process, which will save the acquisition time down to no longer than 1

minute.

◎Please avoid using GPS applications in the following environments as GPS signals are weak:

1. Surrounded by tall high-density buildings

2. Indoor

3. In the basement

4. Under the viaduct

5. In the tunnel

6. In the vehicle equipped with metal-coated windshields

7. Under tree canopy

◎The initializing and functioning of GPS receiver will cause higher power consumption of this

device. Please keep watch for the battery status once you have turned on the GPS applications.

◎While GPS application is in use, an GPS status icon will appear on top of Today screen;

meanwhile, the LED on front top of screen will blink in White.

GPS Tracking

GPS Tracking not only keeps the records of your travel routes, but also preserves the memorable

landmarks during your trip. You can share with friend these routes and landmarks containing

photos and notes through online geographic tools such as Google Earth!

How to Use GPS Tracking

1. Tap Start > Programs > GPS Utility > GPS Tracking

2. Tap

to start tracking as soon as GPS Status indicates “GPS Located”.

Strong GPS signal reception.

Tap to open GPS pop-up

menu.

Detecting GPS satellite

signals.reception. Tap to open

GPS pop-up menu.

Tap “X” or “Hide” to return to Today

screen, tracking will be running

while you are using other

applications

Tap ”Close” to terminate this

application and GPS positioning

As you start GPS Tracking, the application will begin to trail the route you are taking. You can

observe the “Total Distance” and “Speed” of your current trip on GPS Tracking screen.

. During the trip, you can always tap

to add a landmark for a specific site.

to end tracking and proceed to save the track.

5. Tap

Tip: You may add a landmark anytime without initializing GPS tracking as long as your GPS

the Name, Description or take a photo with i350’s built-in camera.

＊

Status shows “GPS Located”!

Adding a Landmark

To edit a landmark, you may input

Tap

to add a photo for this landmark.

beg

Start Tracking: Tap to

ap in recording your track. T

to pause recording.

Clear Record：Tap to clear

this track.

Add Landmark: Tap to add

a new landmark .

Info: Tap to view more

inf

ormation about this trip,

such as number of satellites

connected.

Stop Tracking: Tap to end

tracking, and proceed to save

the track.

After taking the photo, you

Save

Cancel

can review the photo and

choose whether to save it f

the landmark.

Saving Tracks

You will enter Save screen as soon as the tracking stops. To edit this track profile, you may input

Start Point, Destination, File Name and select where you would like to save this file.

Save

Cancel

Note

◎A single track or landmark file will be saved as both .kmz and .gpx formats in the storage location

you selected.

◎The photos included in a .kmz file will be duplicated and saved as .jpg format in the folder where

i350’s built-in camera keeps its taken images.

Get your journey photo-mapped!

Please download and install the free-of-charge program-Google Earth from the website

http://earth.google.com/

Load the .kmz file produced by

i350 with Google Earth to

review your journey.

The photo you took for a specific

landmark will pop up when you

click on the site.

Note:

The photos (.jpg) created by using “Add Landmark” will include the GPS information to its EXIF tag.

You may upload these photos to Geotagged photos-supported web blogs such as Flickr and

Mappr.

Gigabyte GSmart i350 Owner's manual

Gigabyte GSmart i350 Owner's manual

Gigabyte GSmart i350 Owner's manual

Related papers

Other documents