2. Williams Sound
  3. RPK 005-006

Williams Sound RPK 005-006 User manual

  • Hello! I am an AI chatbot trained to assist you with the Williams Sound RPK 005-006 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1/2 RACK PRODUCT
LONG RACK EARSHORT RACK EAR
(2) 6-32 x 3/8"
SCREWS
OPTIONAL 1" SET-BACK:
USE REAR HOLES ON BOTH RACK EARS
HOLE PLUG
(PLASTIC)
(2) 6-32 x 3/8"
SCREWS
A128-1
RPK 005 Installation Steps
1. Attach the short and long rack ears as shown with four 6-32 x
3
⁄8" machine screws. Use the front set of holes on the rack ears
for a ush mount. Use the rear set of holes on the rack ears for a 1" recessed mount.
2. Attach the rack panel assembly to the rack with the machine screws and nylon washers provided.
RPK 005 Single Rack Panel Kit
RPK 005
RPK 006
Rack Panel Kit
Installation Instructions
Model RPK 005 Single Rack Panel Kit
Model RPK 006 Dual Rack Panel Kit
For use with Williams Sound 1/2 rack products
MAN 047i
(2) 6-32 x 3/8"
SCREWS
OPTIONAL 1" SET-BACK:
USE REAR HOLES ON BOTH RACK EARS
4-40 x 3/4" SCREW
4-40 x 3/4" SCREW
COMPLETE ASSEMBLY
LINKING BARS
THREADED HOLE
CLEARANCE HOLE
CLEARANCE HOLE
RACK EAR
1/2 RACK PRODUCT 1/2 RACK PRODUCT
(2) 6-32 x 3/8"
SCREWS
(4) 6-32 x 3/8"
SCREWS
THREADED HOLE
A129-1
RPK 006 Installation Steps
1. Attach the short rack ears as shown with four 6-32 x
3
⁄8" machine screws. Use the front set of holes on the rack ears for a ush
mount. Use the rear set of holes on the rack ears for a 1" recessed mount.
2. Attach the linking bars to each
1
⁄2 rack unit as shown with four 6-32 x
3
⁄8" machine screws. Be sure to install the linking bars so
the clearance hole in one bar is next to the threaded hole in the other.
3. Place the two
1
⁄2 rack units together, so the linking bars overlap. Use two 4-40 x
3
⁄4" machine screws to tie the linking bars
together, as shown in the lower drawing.
4. Attach the rack panel assembly to the rack with the machine screws and nylon washers provided.
Recycling Instructions
Help Williams Sound protect the environment! Please take the time to dispose of your equipment properly.
Product Recycling for Customers in the European Union:
Please do NOT dispose of your Williams Sound equipment in the household trash. Please take the equipment to a electronics
recycling center; OR return the product to the factory for proper disposal.
RPK 006 Dual Rack Panel Kit
Model RPK 005 Single Rack Panel Kit, Model RPK 006 Dual Rack Panel Kit
MAN 047i ©2012 Williams Sound, LLC • All Rights Reserved
10300 Valley View Rd • Eden Prairie, MN 55344
800-328-6190 / 952-943-2252 • FAX: 952-943-2174
www.williamssound.com
/