DeWalt DC820 User manual

Category
Power tools
Type
User manual
DC820
DC822
DC825
DC827
DC830
DC832
DC835
DC837
DC840
DC845
www.
.com
1
i
Figure 1
Figure 2
A
B
Figure 3
j
B
c
A
i
d
g
h
h
2
Figure 4
e
f
c
d
Figure 5
ENGLISH
28
DC820, DC822, DC825, DC827, DC830, DC832, DC835,
DC837, DC840, DC845
CORDLESS IMPACT WRENCHES/DRIVERS
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make
DEWALT one of the most reliable partners for professional power tool users.
Technical data
DC820 DC822 DC825 DC827 DC830 DC832 DC835 DC837 DC840 DC845
Voltage V
DC
18 18 18 18 14.4 14.4 14.4 14.4 12 12
Battery Type NiCd/NiMH – NiCd/NiMH – NiCd/NiMH NiCd/NiMH NiCd/NiMH NiCd/NiMH
– Li-Ion – Li-Ion – Li-Ion Li-Ion
No-load speed min
-1
0-2400 0-2400 0-2400 0-2400 0-2400 0-2400 0-2400 0-2400 0-2400 0-2400
Impact min
-1
2700 2700 2700 2700 2700 2700 2700 2700 2700 2700
Max. torque Nm 195 195 150 150 180 180 140 140 160 130
Tool holder 1/2" 1/2" 1/4" 1/4" 1/2" 1/2" 1/4" 1/4" 1/2" 1/4"
Square Square Hex Hex Square Square Hex Hex Square Hex
Max. bolt size mm M16 M16 M12 M12 M16 M16 M12 M12 M16 M12
Weight (without
battery pack) kg 0.98 0.96 0.98 0.96 0.96 0.96 0.96 0.96 0.96 0.96
Battery pack DE9180 DE9503 DE9140 DE9502 DE9501
Battery type Li-Ion NiMH Li-Ion NiMH NiMH
Voltage V
DC
18 18 14.4 14.4 12
Capacity Ah 2.0 2.6 2.0 2.6 2.6
Weight kg 0.68 1.0 0.58 0.86 0.69
Charger DE9130 DE9135
Mains voltage V
AC
230 230
Battery type NiCd/NiMH NiCd/NiMH/Li-Ion
Approx. charging time min 30 40
(2.0 Ah battery packs) (2.0 Ah battery packs)
Weight kg 0.52 0.52
Fuses:
Europe 230 V tools 10 Amperes, mains
U.K. & Ireland 230 V tools 13 Amperes, in plugs
3
ENGLISH
29
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
DC820 DC822 DC825 DC827 DC830 DC832 DC835 DC837 DC840 DC845
L
pA
(sound pressure) dB(A 91 91 90 90 91 91 90 90 91 90
K
pA
(sound pressure
uncertainty K) dB(A) 3 3 3 3 3 3 3 3 3 3
L
WA
(acoustic power) dB(A) 102 102 101 101 102 102 101 101 102 101
K
WA
(acoustic power
uncertainty K) dB(A) 3 3 3 3 3 3 3 3 3 3
Vibration total values (triax vector sum) determined according to EN60745:
Vibration
emission value m/s² 9.7 9.7 13.7 13.7 9.7 9.7 13.7 13.7 9.7 13.7
Uncertainty K m/s² 2.3 2.3 5.3 5.3 2.3 2.3 5.3 5.3 2.3 5.3
CAUTION: Indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert
symbol indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
The declared vibration emission value has been
measured in accordance with a standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission
value during actual use of the power
tool can differ from the declared value
depending on the ways in which the tool
is used. This could lead to a significant
underestimate of exposure when the
tool is used regularly in such a way.
An estimation of the level of exposure to vibration
experienced during a given period of work should
also take into account the times when the tool is
switched off and when it is running idle in addition to
the trigger time.
This may significantly reduce the exposure level over
the total working period.
EC-Declaration of conformity
DC820, DC822, DC825, DC827, DC830, DC832, DC835,
DC837, DC840, DC845
DEWALT declares that these tools have been
designed in compliance with:
98/37/EC, 89/336/EEC, 2006/95/EC, EN 60745-1,
EN 60745-2-2, EN 55014-2, EN 55014-1.
For more information, please contact DEWALT at the
address below, or refer to the back of the manual.
Director Engineering and Product Development
Horst Grossmann
DEWALT, Richard-Klinger-Strase 11,
D-65510, Idstein, Germany
16/08/2007
4
ENGLISH
30
WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING! Read all safety warnings
and instructions Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
The term “power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
5
ENGLISH
31
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these
instructions taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of
injury and fire.
c) When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws or other
small metal objects that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery, avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
ADDITIONAL SPECIFIC SAFETY RULES
Safety Instructions for All
Impact Drills
Wear ear protectors with impact drills.
Exposure to noise can cause hearing loss.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
Hold power tools by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring or its own cord. Contact with a “live"
wire will make exposed metal parts of the tool
“live" and shock the operator.
Use clamps or other practical way to secure
and support the workpiece to a stable
platform. Holding the work by hand or against
your body is unstable and may lead to loss of
control.
Wear safety goggles or other eye protection.
Hammering and drilling operations cause
chips to fly. Flying particles can cause
permanent eye damage.
Bits, sockets and tools get hot during
operation. Wear gloves when touching them.
Do not operate this tool for long periods of
time. Vibration caused by tool action may be
harmful to your hands and arms. Use gloves
to provide extra cushion and limit exposure by
taking frequent rest periods.
Residual risks
In spite of the application of the relevant safety
regulations and the implementation of safety
devices, certain residual risks cannot be avoided.
These are:
Impairment of hearing
Risk of personal injury due flying particles.
Risk of burns due to accessories becoming hot
during operation.
Risk of personal injury due to prolonged use.
Labels on tool
The following pictograms are shown on the tool:
Wear ear protection.
Wear eye protection.
6
ENGLISH
32
DATE CODE POSITION
Date Code, which also includes the year of
manufacture, is printed into the housing surface that
forms the mounting joint between tool and battery!
Example:
2007 XX XX
Year of Manufacture
Important Safety Instructions for All
Battery Chargers
SAVE THESE INSTRUCTIONS: This manual
contains important safety and operating instruc tions
for the DE9130/DE9135 battery chargers.
Before using charger, read all instructions and
cautionary markings on charger, battery pack,
and product using battery pack.
DANGER: Electrocution hazard.
230 volts are present at charging
terminals. Do not probe with conductive
objects. Electric shock or electrocution
may result.
WARNING: Shock hazard. Do not allow
any liquid to get inside charger. Electric
shock may result.
CAUTION: Burn hazard. To reduce
the risk of injury, charge only DEWALT
rechargeable batteries. Other types of
batteries may burst causing personal
injury and damage.
CAUTION: Under certain conditions,
with the charger plugged in to the
power supply, the exposed charging
contacts inside the charger can be
shorted by foreign material. Foreign
materials of a conductive nature such
as, but not limited to, steel wool,
aluminum foil, or any buildup of metallic
particles should be kept away from
charger cavities. Always unplug the
charger from the power supply when
there is no battery pack in the cavity.
Unplug charger before attempting to
clean.
DO NOT attempt to charge the battery pack
with any chargers other than the ones in
this manual. The charger and battery pack are
specifically designed to work together.
These chargers are not intended for
any uses other than charging D
EWALT
rechargeable batteries. Any other uses
may result in risk of fire, electric shock or
electrocution.
Do not expose charger to rain or snow.
Pull by plug rather than cord when
disconnecting charger. This will reduce risk of
damage to electric plug and cord.
Make sure that cord is located so that it
will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
Do not use an extension cord unless it
is absolutely necessary. Use of improper
extension cord could result in risk of fire, electric
shock, or electrocution.
An extension cord must have adequate wire
size (AWG or American Wire Gauge) for
safety. The smaller the gauge number of the
wire, the greater the capacity of the cable, that
is 16 gauge has more capacity than 18 gauge.
When using more than one extension to make
up the total length, be sure each individual
extension contains at least the minimum wire
size.
Do not place any object on top of charger
or place the charger on a soft surface that
might block the ventilation slots and result
in excessive internal heat. Place the charger
in a position away from any heat source. The
charger is ventilated through slots in the top and
the bottom of the housing.
Do not operate charger with damaged cord
or plug — have them replaced immediately.
Do not operate charger if it has received
a sharp blow, been dropped, or otherwise
damaged in any way. Take it to an authorized
service center.
Do not disassemble charger; take it to an
authorized service center when service or
repair is required. Incorrect reassembly may
result in a risk of electric shock, electrocution or
fire.
Disconnect the charger from the outlet
before attempting any cleaning. This will
reduce the risk of electric shock. Removing
the battery pack will not reduce this risk.
• NEVER attempt to connect 2 chargers together.
The charger is designed to operate on
standard 230V household electrical power.
Do not attempt to use it on any other
voltage. This does not apply to the vehicular
charger.
SAVE THESE INSTRUCTIONS
7
ENGLISH
33
Chargers
The DE9130 charger accepts 7.2 – 18 V NiCd and
NiMH batteries.
The DE9135 charger accepts 7.2 – 18 V NiCd,
NiMH or Li-Ion batteries.
These chargers require no adjustment and are
designed to be as easy as possible to operate.
Charging Procedure
DANGER: Electrocution hazard.
230 volts present at charging terminals.
Do not probe with conductive objects.
Danger of electric shock or
electrocution.
1. Plug the charger (j) into an appropriate outlet
before inserting battery pack.
2. Insert the battery pack (h) into the charger.
The red (charging) light will blink continuously
indicating that the charging process has started.
3. The completion of charge will be indicated by
the red light remaining ON continuously. The
pack is fully charged and may be used at this
time or left in the charger.
Charging process
Refer the table below for the state of charge of the
battery pack.
State of charge
charging – – – – – –
fully charged –––––––––––
hot/cold pack delay ––– – ––– –
replace battery pack •••••••••••
problem •• •• •• ••
Automatic refresh
The automatic refresh mode will equalise or balance
the individual cells in the battery pack at its peak
capacity. Battery packs should be refreshed weekly
or whenever the pack no longer delivers the same
amount of work.
To refresh your battery pack, place the battery in the
charger as usual. Leave the battery pack for at least
8 hours in the charger.
Hot/Cold Pack Delay
When the charger detects a battery that is too hot
or too cold, it automatically starts a Hot/Cold Pack
Delay, suspending charging until the battery has
reached an appropriate temperature. The charger
then automatically switches to the pack charging
mode. This feature ensures maximum battery life.
DEEP DISCHARGE PROTECTION
The battery pack is protected against deep
discharging when it is used in the tool.
Important Safety Instructions for All
Battery Packs
When ordering replacement battery packs, be sure
to include catalog number and voltage. Consult the
chart at the end of this manual for compatibility of
chargers and battery packs.
The battery pack is not fully charged out of the
carton. Before using the battery pack and charger,
read the safety instructions below. Then follow
charging procedures outlined.
READ ALL INSTRUCTIONS
Do not charge or use battery in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Inserting
or removing the battery from the charger may
ignite the dust or fumes.
Charge the battery packs only in DEWALT
chargers.
• DO NOT splash or immerse in water or other
liquids.
Do not store or use the tool and battery
pack in locations where the temperature
may reach or exceed 40˚ C (105° F) (such as
outside sheds or metal buildings in summer).
DANGER: Electrocution hazard. Never
attempt to open the battery pack for
any reason. If battery pack case is
cracked or damaged, do not insert into
charger. Electric shock or electrocution
may result. Damaged battery packs
should be returned to service center for
recycling.
WARNING: Never attempt to open the
battery pack for any reason. If battery
pack case is cracked or damaged, do
not insert into charger. Do not crush,
drop or damage battery pack. Do not
use a battery pack or charger that has
received a sharp blow, been dropped,
run over or damaged in any way (i.e.,
pierced with a nail, hit with a hammer,
stepped on). Damaged
battery packs should be returned to
service center for recycling.
8
ENGLISH
34
CAUTION: When not in use, place
tool on its side on a stable surface
where it will not cause a tripping or
falling hazard. Some tools with large
battery packs will stand upright on the
battery pack but may be easily knocked
over.
SPECIFIC SAFETY INSTRUCTIONS FOR NICKEL CADMIUM
(NiCd) OR NICKEL METAL HYDRIDE (NiMH)
Do not incinerate the battery pack even if it
is severely damaged or is completely worn
out. The battery pack can explode in a fire.
A small leakage of liquid from the battery
pack cells may occur under extreme usage
or temperature conditions. This does not
indicate a failure.
However, if the outer seal is broken:
a. and the battery liquid gets on your skin,
immediately wash with soap and water for
several minutes.
b. and the battery liquid gets into your eyes,
flush them with clean water for a minimum
of 10 minutes and seek immediate medical
attention. (Medical note: The liquid is
25-35% solution of potassium hydroxide.)
SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION
(LI-ION)
Do not incinerate the battery pack even if it
is severely damaged or is completely worn
out. The battery pack can explode in a fire.
Toxic fumes and materials are created when
lithium ion battery packs are burned.
If battery contents come into contact with
the skin, immediately wash area with mild
soap and water. If battery liquid gets into the
eye, rinse water over the open eye for
15 minutes or until irritation ceases. If medical
attention is needed, the battery electrolyte
is composed of a mixture of liquid organic
carbonates and lithium salts.
Contents of opened battery cells may cause
respiratory irritation. Provide fresh air. If
symptoms persists, seek medical attention.
WARNING: Burn hazard. Battery liquid
may be flammable if exposed to spark
or flame.
Battery Cap (fi g. 3)
A protective battery cap is supplied to cover the
contacts of a detached battery pack. Without the
protective cap in place, loose metal objects could
short circuit the contacts, causing a fire hazard and
damaging the battery pack.
1. Take off the protective battery cap before
placing the battery pack in the charger
or tool (Fig. 3A).
2. Place the protective cap over the contacts
immediately after removing the battery pack
from the charger or tool (Fig. 3B).
WARNING: Make sure the protective
battery cap is in place before storing or
carrying a detached battery pack.
Battery pack (fi g. 1)
BATTERY TYPE
The DC820, DC822, DC825 and DC827 operate on
18 volt battery packs.
The DC830, DC832, DC835 and DC837 operate on
14.4 volt battery packs.
The DC840 and DC845 operate on 12 volt battery
packs.
Storage Recommendations
1. The best storage place is one that is cool and
dry away from direct sunlight and excess heat
or cold.
2. Long storage will not harm the battery pack or
charger. Under proper conditions, they can be
stored for 5 years or more.
Labels on charger and battery pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual
before use.
Battery charging.
Battery charged.
Battery defective.
Hot/cold pack delay.
Do not probe with conductive objects.
Do not charge damaged battery packs.
9
ENGLISH
35
Use only with DEWALT battery packs,
others may burst, causing personal injury
and damage.
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack
NiMH, NiCd+ and Li-Ion.
Charges NiMH and NiCd
battery packs.
Charges Li-Ion battery packs.
See technical data for charging time.
Package contents
The package contains:
1 Cordless Impact Driver/Wrench
2 Battery packs
1 Charger
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs and chargers are not included
with N-models.
Check for damage to the tool, parts or
accessories which may have occurred during
transport.
Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1–5)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
INTENDED USE
These heavy-duty impact wrenches/drivers are
designed for professional impact screwdriving
applications.
The impact function makes this tool particularly
useful for driving fasteners in wood, metal and
concrete.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
These impact wrenches/drivers are professional
power tools. DO NOT let children come into
contact with the tool. Supervision is required when
inexperienced operators use this tool.
a. Trigger switch
b. Forward/reverse button
c. Sleeve
d. 1/4" hex quick-release chuck
e. Detent pin
f. Anvil
g. Worklight
h. Battery pack
i. Battery release buttons
Electrical safety
The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your DEWALT charger is double insulated
in accordance with EN 60335; therefore
no earth wire is required.
If the supply cord is damaged, it must be replaced
by a specially prepared cord available through the
D
EWALT service organization.
Mains plug replacement
(U.K. & Ireland only)
DANGER:
Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D
EWALT repair agent or a qualified electrician.
Disconnect the plug from the supply.
Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
10
ENGLISH
36
The cable wire colours, or a letter, will be
marked at the connection points of most good
quality plugs. Attach the wires to their respective
points in the plug (see below). Brown is for Live
(L) (2) and Blue is for Neutral (N) (4).
Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminals crews.
1
2
4
3
WARNING: NEVER use a light socket.
NEVER connect the live (L) or
neutral (N) wires to the earth
pin marked E or .
Using an extension cable
An extension cord should not be used unless
absolutely necessary. Use an approved extension
cable suitable for the power input of your charger
(see technical data). The minimum conductor size is
1 mm
2
; the maximum length is 30 m.
When using a cable reel, always unwind the cable
completely.
ASSEMBLY AND ADJUSTMENTS
WARNING: Prior to assembly and
adjustment, always remove the battery
pack. Always switch off the tool before
inserting or removing the battery pack.
WARNING: Use only DEWALT battery
packs and chargers.
Inserting and removing the
battery pack from the tool (fi g. 2)
WARNING: To reduce the risk of
serious personal injury, turn tool off
and disconnect battery pack before
making any adjustments or removing/
installing attachments or accessories.
An accidental start-up can cause injury.
TO INSTALL THE BATTERY PACK INTO THE TOOL HANDLE
1. Align the base of the tool with the notch inside
the tool’s handle (Fig. 2).
2. Slide the battery pack firmly into the handle until
you hear the lock snap into place.
TO REMOVE THE BATTERY PACK FROM THE TOOL
1. Press the battery release buttons (i) and firmly
pull the battery pack out of the tool handle.
2. Insert battery pack into the charger as
described in the charger section of this manual.
OPERATION
Instructions for use
WARNING: Always observe the safety
instructions and applicable regulations.
Variable Speed Trigger Switch
(fi g. 1)
To turn the tool on, squeeze the trigger switch (a).
To turn the tool off, release the trigger switch.
Your tool is equipped with a brake. The chuck will
stop as soon as the trigger switch is fully released.
Use lower speeds for starting holes without a
center punch, drilling in metals or plastics, or driving
screws. For maximum tool life, use variable speed
only for starting holes or fasteners.
NOTE: Continuous use in variable speed range is
not recommended. It may damage the switch and
should be avoided.
Forward/Reverse Control Button
(fi g. 1)
A forward/reverse control button (b) determines the
direction of the tool and also serves as a lock off
button.
To select forward rotation, release the trigger
switch and depress the forward/reverse control
button on the right side of the tool.
To select reverse, depress the forward/reverse
control button on the left side of the tool.
The center position of the control button locks the
tool in the OFF position. When changing the position
of the control button, be sure the trigger is released.
NOTE: The first time the tool is run after changing
the direction of rotation, you may hear a click on
start up. This is normal and does not indicate a
problem.
11
ENGLISH
37
Worklight (fi g. 1)
There is a worklight (g) located just above the trigger
switch (a). The worklight will be activated when the
trigger switch is squeezed.
NOTE: The worklight is for lighting the immediate
work surface and is not intended to be used as a
flashlight.
Quick-Release Chuck (fi g. 4)
DC825, DC827, DC835, DC837, DC845
NOTE: The chuck accepts 1/4" hex accessories
only.
Place the switch in the locked off (center) position or
remove battery pack before changing accessories.
To install an accessory, pull the chuck collar (c)
away from the front of the tool, insert the accessory
and release the collar. The accessory is locked in
place.
To remove an accessory, pull the chuck collar
away from the front of the tool. Remove the
accessory and release the collar.
Anvil With Detent Pin (fi g. 5)
DC820, DC822, DC830, DC832, DC840
Place the switch in the locked off (center) position or
remove battery pack before changing accessories.
To install a socket on the anvil, align the hole in
the side of the socket with the detent pin (e) on the
anvil (f). Press the socket on until the detent pin
engages in the hole. Depression of detent pin may
be necessary to aid installation of socket.
CAUTION: Use only impact sockets.
Non-impact sockets may break and
cause a hazardous condition. Inspect
sock et prior to use to ensure that it
con tains no cracks.
To remove a socket, depress the detent pin
through the hole and pull the socket off.
Usage
Your impact tool generates the following output
torque:
Cat # Ft.-Lbs. In.-Lbs. Nm
DC820 145 1740 195
DC822 145 1740 195
DC825 111 1330 150
DC827 111 1330 150
DC830 135 1620 180
DC832 135 1620 180
Cat # Ft.-Lbs. In.-Lbs. Nm
DC835 103 1240 140
DC837 103 1240 140
DC840 120 1440 160
DC845 96 1150 130
CAUTION: Ensure fastener and/or
system will withstand the level of torque
generated by the tool. Excessive torque
may cause breakage and possible
personal injury.
1. Place the socket on the fastener head. Keep
the tool pointed straight at the fastener.
2. Press switch to start operation. Always check
torque with a torque wrench, as the fastening
torque is affected by many factors including the
following:
Voltage: Low voltage, due to a nearly
discharged battery, will reduce fastening
torque.
Socket size: Failure to use the correct
socket size will cause a reduction in fastening
torque.
Bolt Size: Larger bolt diameters generally
require higher fastening torque. Fastening
torque will also vary according to length,
grade, and torque coefficient.
Bolt: Ensure that all threads are free of rust
and other debris to allow proper fastening
torque
Material: The type of material and surface
finish of the material will affect fastening
torque.
Fastening Time: Longer fasten ing time
results in increased fastening torque.
Using a longer fastening time than recom-
mended could cause the fasteners to be
overstressed, stripped or damaged.
MAINTENANCE
Your DEWALT power tool has been designed to
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of
serious personal injury, turn tool off
and disconnect battery pack before
making any adjustments or removing/
installing attachments or accessories.
An accidental start-up can cause injury.
12
ENGLISH
38
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the charger
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.
Optional accessories
WARNING: Since accessories, other
than those offered by D
E
WALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D
E
WALT, recommended
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
E
WALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D
E
WALT provides a facility for the collection and
recycling of D
E
WALT products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
E
WALT office at the address indicated in this
manual. Alternatively, a list of authorised D
E
WALT
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
Rechargeable Battery Pack
This long life battery pack must be recharged when
it fails to produce sufficient power on jobs which
were easily done before. At the end of its technical
life, discard it with due care for our environment:
Run the battery pack down completely, then
remove it from the tool.
Li-Ion, NiCd and NiMH cells are recyclable. Take
them to your dealer or a local recycling station.
The collected battery packs will be recycled or
disposed of properly.
13
੄Ⱥը
,+ ,+ ,+ ,+ ,+ ,+ ,+ 
,+ ,+ ,+ 
Ӻؚ޴০ৃюࣺ
μШޭՅ
ࣛੂੈ͈͒
,-?)4<લૐ൐໓ሳጄ჎໧໏੢ຫጁఁఋ,-?)4<௴࿼೯ઠጔ઴႞ዜ੭෧ෟጡཅၕቛጄ
႖බ႖౏લૐຫဧၴ౹ၦၨႜዻ௴ૺ࿕ၒചၴ൘ၼྤတཀఁఋ
Ɂ٣ͼޭ঄
DC820
DC822 DC825 DC827 DC830 DC832 DC835 DC837 DC840 DC845
V
DC
18 18 18 18 14.4 14.4 14.4 14.4 12 12
NiCd/NiMH - NiCd/NiMH - NiCd/NiMH - NiCd/NiMH - NiCd/NiMH NiCd/NiMH
- Li-Ion - Li-Ion - Li-Ion - Li-Ion - -
min
-1
0-2400 0-2400 0-2400 0-2400 0-2400 0- 2400 0-2400 0-2400 0-2400 0-2400
min
-1
2700 2700 2700 2700 2700 2700 2700 2700 2700 2700
Nm 195 195 150 150 180 180 140 140 160 130
1/2" 1/2" 1/4" 1/4" 1/2" 1/2" 1/4" 1/4" 1/2" 1/4"
mm M16 M16 M12 M12 M16 M16 M12 M12 M16 M12
( )
kg 0.98 0.96 0.98 0.96 0.96 0.96 0.96 0.96 0.96 0.96
DE9180 DE9503 DE9140 DE9502 DE9501
Li-Ion NiMH Li-Ion NiMH NiMH
V
DC
18 18 14.4 14.4 12
Ah 2.0 2.6 2.0 2.6 2.6
kg 0.68 1.0 0.58 0.86 0.69
DE9130 DE9135
V
AC
230 230
NiCd/NiMH NiCd/NiMH/Li-Ion
30 40
(2.0 Ah
)
(2.0 Ah )
kg 0.52 0.52
:
230 V 10 A,
230 V
13 A,
14
ߣި"ۭߝ࠵ऀ
ఋၗႜၡ௴ੜઠધබૐၡཉੜ౅൐໕඗ጁ
ఁఋຫဧ໕඗໏൐ၪધఋၗ઴੪ၔૺጭ౹࿝
၉ၡዻཊགྷ࿼
੄Ⱥը
DC820
DC822 DC825
DC827 DC830 DC832 DC835 DC837
DC840
DC845
L
pA
( )
dB(A
)
91 91 90 90 91 91 90 90 91
90
K
pA
( K)
dB(A)
33 33 33333
3
L
WA
( )
dB(A)
102 102 101 101 102 102 101 101 102
101
K
WA
(
K)
dB(A)
3
33333333
3
EN60745 ( ):
m/s
9.7 9.7 13.7 13.7 9.7 9.7 13.7 13.7 9.7
13.7
K
m/s
2.3 2.3 5.3 5.3 2.3 2.3 5.3 5.3 2.3
5.3
඗གྷౘჰ౏෮ᆖ੤ၔዑაቇ༺ቼ෮ฅ࿝ಋೡᆬ
ႜ౗࿘ၒඑલૐ൐໏ച๗ોዾಕຫဧዾ༘ၰཀ
ఁఋ
඗གྷౘჰ౏෮ᆖ੤ၔிᆖ࿝ఝዽ࿵๗ዀਜ਼࿝౅
ຫဧዾ༘ၰཀఁఋ
჎࿌ჰၵ࿕ૺ੝౏ྦ௲୶௴ჰ౏࿝ఝዽிᆖ
༘აၕዀਜ਼ዾಕ௴લૐ൐ၵ౏གྷሢགྷ੝ဘ࿝౅
લૐ൐୬གྷ੝઴၉፨ືሲചၰ࿘పགྷ੝౅ધ
഍ጄ྽ጁఁఋ
ၦഄ઎ዻඓ႖ᅰၵ࿕ૺ੝࿝ઃᅸிᆖ༘აၕ
ሙ઎ბၩ༘ၰཀఁఋ
-+ߜੈأؚܕ
,+ ,+ ,+ ,+ ,+ ,+ 
,+ ,+ ,+ ,+ 
ၴໞዽႜพ௴ྤ೭ၡ჎໴ച,-?)4<࿝බၡዻ੿୾ຫဧ
໕඗໏౮ิึၕᅒႮዻཊགྷ࿼
࿟ხఁ࿌ൟෟ႞ዜ੭෧ಀആሽ0WZ[\/ZW[[UIVV
15
ވਜ਼"႗෢ዽ၁ጔືሲ൐୾ረஏඑ
෮ხዻხྨၒඓײҲϼ̻ڐƣ੄
ջ׾ၕᅾ೭ጁఁఋ
ǧǮ"ၻႁ႕ၒച၁ጔዽືሲ൐୾ረ
ஏඑ෮ხዻხྨၒඓײҲϼ̻ڐƣ
੄ջ׾ၕᅾ೭ዾ༘౅ၰཀఁఋ
ࠕި"ၻႁ႕ၒച၁ጔዽືሲ൐୾ረஏ
එ෮ხዻხྨၒඓǧԛੂdž˅Ƣ՚ݱ
ջ׾ၕᅾ೭ዾ༘ၰཀఁఋ
ࠕި"ྦ႖ઠધૺጭ࿖ၦຫဧ౗ඓ
ၻႁ႕ၒച၁ጔዽືሲ൐୾ረஏඑ
෮ხዻხྨၒඓ߈׵׾ၡؾੋਜ਼෧ແዾ
༘ၰཀఁఋ
੢႖၁ጔၕ୾ረஔఁఋ
ጷႁ၁ጔၕ୾ረஔఁఋ
ǧǮ"႖౏લૐၡཇ႞ຫဧૺ੝
౏ྦჰ౏෮ᆖ੤ၔલૐ൐ຫဧዻ௴
෮ฅ࿝ಋೡ඗གྷౘ੤઴ఐೡჲ༘
ၰཀఁఋၦಕබ࿝લૐ൐ၦ೻ዽ
෮ངၒചઢ໵ጄ໏ຫဧዻඓிᆖၦ
ཇ႞พఋືఙᎁ઴໴ዀਜ਼ౙ༘ၰཀ
ఁఋ
,-?)4<௴၁લૐਜ਼ఋၗຫጃၕა༘ዻ࿥໕ઢ౗࿘
ၗၕ໓࿎ጁఁఋ
! -+ !--+!-+-6
-6-6-6
,-?)4<:QKPIZL3TQVOMZ;\ZI[M
,1L[\MQV/MZUIVa
 
੄Ⱥը
ߝΖǹȗܤǽ੄ްԬۭߝǧǮ
੕ક࢙Ǯ੅ٟ޷ΌѢӡξǧǮԦ࠵ڊ
ײ੊ޜեǽੋΥڑڊ݃
16
ǧǮ"ิື၁ጔၕბၦ഍ඓຫဧ໕඗
໏൐༙ხዻཊགྷ࿼
ǧǮۭߝܤǽ੄ӡξǧǮԦ࠵ڊ
ײ੊ޜ٠࠵ੂڑڊ݃ઠધෟხགྷຫጃ
ၕა༘ዻხྨၒඓ੢႖ጷႁෟವ௴
ཉੜዽิືၕᅾ೭ዾ༘ၰཀఁఋ
ઠધ࿝໏ຫဧ౗௴Ŕ႖౏લૐŕೡ௴൥ၔᇬ౵
ຫဧ႖౏લૐವ௴ᇬ౵ුຫဧ෰ሽ൘ૐ౏
႖౏લૐ൐ၡුጁఁఋ
޼ܜܸܭۭߝ
I޼ܜܸܭޜࢶǢੂǮԯǕސ࠵ੂڑڊ݃
ጯၼዻ੿୾࿌౞ဪၵ࿕࿱࿦࿝໏௴ຫધਜ਼෧ແዻૺ
༱ཀఁఋ
JƢܯأۼࢷƢځϼ̻ӆ࠵υ਍ԮأսވɁܤؖ
ߝΖǹȗҗײݮੂ࠵ҧڑڊ݃႖౏લૐ࿝ൿხ୾
࿨ૺ൐෧ጷགྷሣ༘ၰ௴ุିၦታ༘ၰཀఁఋ
K႖લલૐ൐ຫဧዻ௴౏ྦ࿝௴࿌൚ၦဉ჎ตຫ
೥౹ၦၵ࿕࿱࿦࿝ਜ਼ଆၦ౹࿌࿼ხජዻ౅ഛዻཊ
གྷ࿼჎ตၦຮൢጄႦቛ႞എၕၬၕ༘ၰཀఁఋ
ߝɁۭߝ
IߝΖǹȗިਸ਼тȶ̻वاৃݐ੯ڋޭҳ۫܄ੈ͈͒
ਸ਼тȶҗܓϧԵڋޙѡΌߞͤƴߵੂ࠵ҧڑڊ݃ߡ࠵
Ο࠵Ӛߡ࠵ߝΖǹȗݐੇɯܓͩ঄ਸ਼тȶΌײݮੂ
࠵ҧڑڊ݃੭Ⴎ౗ხྨၔዯ೻૯ෟጨངၦ൬௴
ᇮ໠ቼ൐ຫဧዻඓ੢႖၁ጔၦბ࿌౼ఁఋ
J৙ޭ਴Шχܤޭ঄ю࠵Ԧ˞߆ǮυǻƱޭߡ࠵Ο
ਘӚܤӧޭͣ࠵ۯΌѢੂڑڊ݃චၦႚხ౗࿌ၰၒ
ඓ੢႖၁ጔၦைྤჵఁఋ
K႖౏લૐ൐๗ವ௴ཀዽጹઠ࿝ிᆖགྷሠხྨ
౅ഛ჎ၡዻཊགྷ࿼႖౏લૐ࿝මၦ౹࿌ਜ਼ඓ੢႖
၁ጔၦைྤჵఁఋ
Lळμҗੇջѡ͒Ѻ࠵ҧڑڊ݃ळμҗ߃ǮߝΖ
ǹȗҗݱԬੂdž˅߃۫͠Ɂdž˅ਸ਼тȶҗִ࠵ҧڑڊ݃
ܰ݃ްˊऄѡݱӡؖҟϼ̻ݵ࠶ޭ̻ջਣܤͣ࠵
ۯΌѢळμҗեǽੂڑڊ݃ᇬ౵ਜ਼໷ື౗੿୾౪࿒ጠ
ၰၒඓ੢႖၁ጔၦைྤჵఁఋ
MߝΖǹȗҗڎݟܤؖײݮ੅Ϝ̻ڎݟײݮܤ
ߜੈ੄ܯ߆ळμҗײݮੂڑڊ݃ཇဘຫဧ࿝႕ጁ
ዽᇬ౵൐ຫဧዻඓ੢႖၁ጔၦბ࿌౼ఁఋ
Nܓ࡜ٟܝޭڇ੄߆ػܤؖߝΖǹȗҗײݮੋ܄
ੂ̻ǧݯܤ̻࢔͕Ɂ:+,ѡեੴΟߝݻޜǹȽ
ੂڑڊ݃:+,൐ຫဧዻඓ੢႖၁ጔၦბ࿌౼ఁఋ
ڌࢷۭߝ
I႖౏લૐ൐ຫဧዾಕ௴෮ཉዻხ൥ધၵ࿕࿝
჎ၡዻඓ໏ືངၕಋ്ཊགྷ࿼ዳ઩ዽືሲၦ੿୾
྾ම༜ᆳഭ႞൐ฟဧዽືሲ࿝໏௴႖౏લૐ൐
ຫဧዻხൠཊགྷ࿼႖౏લૐ൐ຫဧዻ௴თ࿝჎ၡ
എၕၬ࿌ཅᅰิືၕఙዾ༘ၰཀఁఋ
Jڌࢷեੴ߆ȗҗ࢕ݮੂڑڊ݃੊׾̤եੴ߆
ȗҗ࢕ݮੂڑڊ݃႕ጁዽືጼ࿝໏෮ჰൠ༺ሙ
ු୪೿෮ხྦ႖ጷྦ႖කವ௴ᅯഎพጭૺૐ౾
ၡྦ႖ၿૐ൐ຫဧዻඓཅᅰิື၁ጔၦბ࿌౼ఁ
ఋ
KިΌੂ࠵ۯޛ߆֞ƢΖԵ࠵ߝݻԦϼ̻Է঄
ҟ০ܤܯǢ੄׾ॹѡǹȗҗ߃dž˅ݱԬ੅Ϝ̻
ײߝܤځވࣺƢɥ࠻ވࣺܤ޷̻࠵Ԭμڊ੿ޯੂ
ڑڊ݃༺၁ᆳਜ਼ᇣჴ၁ᆳ࿝ၰ௴ືሲ࿝໏༺၁ᆳ
࿝໷ਜ਼ೢၦజၔືሲച႖౏લૐ൐ဪ෥ዻ੿୾
႖౏લૐ࿝႖ဴၕલ૶ዻඓຫધਜ਼෧ແጁఁఋ
LߝΖǹȗҗपɁߝܤӡξߵߣ१ϼ̻юࣺҗ
ߥdžੂڑڊ݃႖౏લૐၡፂ႖ิ࿝ഇᆳ୾ሠਜ਼
ิᅎ౗࿌ၰၒඓཅᅰิືၕఙዾ༘ၰཀఁఋ
MӺҟੂǕঢ়ޜ׃࠵ҧڑڊ݃੊׾݆ԨҖ޻إѡ
ؖؖȴ੯ޜސ࠵ੂڑڊ݃૯೻ඓ࿵ૺᆳྨၔືጼ
࿝໏႖౏લૐ࿝ఝዽ႞࿌എၦጎື౛ఁఋ
Nߜߞ੄ިզޜ࢕ݮੈ͈͒ਖ਼ъ੄ݍޭ˅߆ڌȗ
җ࢕ݮੂ࠵ҧڑڊ݃ӄҟऄЩݍԦ߆ƪޭݵ࠶
ޭ̻ջਣܤͣ࠵ۯΌѢސިੂڑڊ݃ጒഃዽဆ
ၿཅૐವ௴ૼൽ൘ਜ਼ီჯၦ௴ิዜ࿝൥഍౹༘
ၰཀఁఋ
Oӆ࠵ԷࣝԦ࠼࠷ڊܯǢޜވ੄߆ࣺƢߥǹ
Οǧݯޭπ߆ࣺƢܯǢΞܓߜߞૈײݮΞǮ޷
̻࠵Ԭμڊ੿ޯੂڑڊ݃ჵჰၿᆳ൐ຫဧዻඓ
ൿხဉશഏౘ၁ጔၕბၩ༘ၰཀఁఋ
ߝΖǹȗײݮԦࠕިײ੊
IߝΖǹȗܤӺҟ੄ૌޜƢੂ࠵ҧڑڊ݃
ੋ͠ݮΌܤҳ̻݆ԨҖߝΖǹȗҗײݮੂڑڊ݃
࿿෡൏႖౏લૐ൐ຫဧጄ྽໕ઢౘ໵౅ചၵ࿕ၕ
ధဩྦ႖ዻધႜጸዻ઎༘ጌዾ༘ၰཀఁఋ
Jځވࣺѡप࠵Ǯɥ࠵࠵ۯ̻ߝΖǹȗ̻
ײݮੂ࠵ҧڑڊ݃༺၁ᆳച႞࿌౗ხྨ௴႖౏
લૐ௴၁ጔዻඑ༘൘ਜ਼ዶဠጁఁఋ
KߝΖǹȗҗߵߣੂdž˅ۼإؖҟҗ՜ǧੂdž˅
եǽੂɁߝܤߝݻԦϼ̻Է঄ҟ০ܤؖਸ਼тȶҗ
ִڑڊ݃ၦ೻ዽ࿵෮႕ྦ႖Ⴎᆳ൐ಋೡ྽႖౏
લૐਜ਼੣ၴૺၵ౏ዾ၁ጔၦბ࿌౼ఁఋ
੄Ⱥը
t
t
t
t
t
t
t
17
Lײݮੂ࠵ۯ̻ߝΖǹȗ̻ܓҡޭިؾޭͣ࠵
ۯ̻ǸܤեǽੂǮߝΖǹȗ˅ը࠵ڊײ੊ܤ
ޮ٠ੂ࠵ۯޛײЬޭߝΖǹȗҗߞͤײݮੂ࠵
өੂǕੂڑڊ݃႖౏લૐ௴ፐഏၕ෦ხྨၔ
ຫဧၴਜ਼ఋളඓ၁ጔጁఁఋ
MߝΖǹȗސ࠵եٟݵ࠶ޭ̻ջਣި߀өΟ
ߣїޭ˅Ԩޯϐջਣ৙ؾԦɁ९ߝΖǹȗި
޼Ζܤܸ੕ޜԛࣾٟ޷̻׾ॹƢ޷̻࠵੿ޯੂ
ڑڊ݃ؾ׾Οջսޭ޷̻ǧݯײݮੂɁߝܤ
ߝΖǹȗҗٟҟੂڑڊ݃ൣၔຫધ௴႖౏લૐ
൐႞ఝച၉ხพ༘ዻხྨྤ෧ແጁఁఋ
Nߞ׳ǹȗҗܼҟੂǮəʺ੄׾ॹѡސ࠵ੂڑ
ڊ݃၉ხพ༘൐࿿෡ച༘ጌዻ࿥႗ຬਜ਼ၿၴ൘
ਜ਼࿵൘ዽ႗ຬલૐ൐ຫဧዻඓ෡ၨಉၦ႕ધ
ఋളૺਜ਼ဧၦጁఁఋ
O޼ܜ઀ǧǻٟ੓੅޼ܜޜǮєੂܬը࠵ڊ
ײ੊ܤϒШߝΖǹȗۼإؖҟԦয֞ৃυޜ
ײݮੂڑڊ݃มຫဧ໕඗໏ၡஏဧ઴ఋ൏ဧ౅
ച႖౏લૐ൐ຫဧዻඓ၁ጔዽືጼၦ෧ແዾ༘
ၰཀఁఋ
Է঄ҟǹȗײݮԦࠕިײ੊
Iߥߵܜࢷܤؖ࠵ߣ੄࣡ߝɁѡҩ࣡ߝੂڑڊ݃
ዽႶ൅ၡ෰ሽ൘ኟ࿝႕ጁዽᆚ႖ૺ൐ఋ൏෰ሽ
൘ኟ઴ጀନຫဧዾઠဨጷႁ၁ጔၦၰၕ༘
ၰཀఁఋ
JߝΖǹȗܤ̻ߝݮޙѡǩΟԷ঄ҟ০ҩ
ײݮੂڑڊ݃ఋ൏෰ሽ൘ኟၕຫဧዻඓิືෟ
ጷႁၡ၁ጔၦၰၕ༘ၰཀఁఋ
KԷ঄ҟ০ޜײݮੂ࠵ۯޜϜܤ̻͕޻җؖѡ
͕Щڊ४ٟ޷̻߽ޭॣҤΖߝّܰө˅ײ
ϼ̻Ɂ९޼ޛȼؼӿࢷυޙѡջ঄ӇҟϨܓ࠷
߆ػܤեǽੂڑڊ݃෰ሽ൘ఎၴਜ਼໏ചఎೢౙ
ઠဨጷືၦ୾ጷႁၡ၁ጔၦၰཀఁఋ
Lܰ۬੄ߵLjܤ̻ؖԷ঄ҟܤؖ̢ۼޭԮ؈੅
ٟ޷ޙӘޭϜ̻̢ۼޭ਺ջܤͣ࠵ۯΌѢ
ੂڑڊ݃ҩ܅̢ۼޭ਺ջܤӾޛǧݯܤ̻શҔ
̻ӿѡ۩ܓ˖ڑڊ݃̢ۼޭ̤ܤπܓƤǧݯ
ިײި࠷࢘ޜԭɁԨЭ͈͒෰ሽ൘௛ྵ࿝ႚᅿ
གྷዳิ෧ჰၦ୾ጷືၕ၉෧ዾ༘ၰཀఁఋ
ߣ֞
I޻ǞޜƯࣜɁ٣޻ƢΖްȒࢷջਣޜײݮੂ
ܬߣ֞޼ܜޜٟ੓ੋ܄ੈ͈͒૯೭྽႖౏લૐ
ၡྦ႖ၦพၿ౛ఁఋ
ࣚƢۭߝȳࣻ
ӡξ޴০ৃμҢܤͤ੄ۭߝ࠵ऀ
޴০ৃμҢޜײݮ੅Ϝ̻ࢶѕեੴ߆ȗҗ࢕ݮੂ
ڑڊ݃
໴ၗ࿝ிᆖ౗ඓᅯഎၦ໷ཇౙ༘ၰཀఁఋ
ǹȗݐੇɯߥǹΞ̻եߵ੍πޜײݮੂڑڊ݃
႞࿌എၕၬၒඓཅᅰิືၕఙዾ༘ၰཀఁఋ
ߞ׳ǹȗƢ٤ǝ࠷Էؚϼ̻޻ࢷळμܤߡࣆ੅
ٟ޷̻޼ܜޜٟ੓੅Ϝ̻ߞܯΟȶҤੁਘӚҩ
ͣΌѢੂܬߝΖǹȗҗ߃ޙڑڊ݃Ŕጺໜጷືሲ
ၨ႖໓࿝ႚᅿዻඓલૐၡிᆖౘ૵໵ิዜၦ
Ŕጺໜጷືሲŕਜ਼౗ාചၵ࿕ၴਜ਼੢႖౛ఁఋ
ॣи਴ϼ̻͒Җߜߞ੄ԵڋޜޭݮੂܬۭߣΟ
޼ܜͤܤ޼ܜǹȗπޜǮߣԦ࠵࠵ੂڑڊ݃
ၵ࿕මၕ໷ၒചၼ੿୾ච࿝ხხዻ௴ጌ౏ၔ
ุྦႜዻඑ႞࿌എၕၬၕ༘ၰཀఁఋ
ۭߝǮȺϼ̻Ɂ९̤եੴ߆ȗҗ࢕ݮੂڑڊ݃
ੋӄԦμҢ޼ܜڊ৙ਂޭˊ۫Ʀٟ޷ڇ͈͒
ኒኻၦஃྤਜ਼௝ၦ࿱ૐ႕ၒച໷ືౙ༘ၰཀఁఋ
޼ܜࠞܤ̻֞ৃػनԦǹȗƢДǍڇ͈͒
ၦ൐ൢჲಕ௴ၿ੣ၕᅎဧዻཊགྷ࿼
݃жڊƤǹȗҗ޼Ζڊ१࠵ҧڑڊ݃લૐၵ౏
ၒച෧ແዻ௴ჰ౏ၔ໷઴ኖ࿝ጄചါ༘ၰཀ
ఁఋᆓਜ਼႕ၨဋᆚၕ၁ጄၿ੣ၕᅎဧዻધ
༘གྷച፨ངགྷ੝ၕ౞࿌ிᆖၕბၦཊགྷ࿼
Ɂ९޽Ҍވਜ਼
શഏౘྦ႖૬ႜၕა༘ዻધྦ႖ၿᆳ൐ຫဧዽఋ
ધጄ౅ችႜዽ၁ጔၔዳዾ༘࿖ཀఁఋၦ೻ዽ
၁ጔၔఋၗ઴੪ཀఁఋ
ᅯഎ໷ື
ኒኻஃ൜ၒചၨዽཅᅰิື၁ጔ
ၵ࿕თ್੿ဲხ௴ྵໞ໏൘ചၨዽጷື၁ጔ
ၿགྷ੝ຫဧၒചၨዽཅᅰิືၡ၁ጔ
ǹȗܤջ࢕ΟШՔ
લૐ࿝௴ఋၗ઴੪ၔ૯൜ၦၰཀఁఋ
૥พጭၿૐ൐ᅎဧዻཊགྷ࿼
௝พጭၿૐ൐ᅎဧዻཊགྷ࿼
੄Ⱥը
t
t
t
t
t
t
t
t
t
t
t
t
t
t
t
18
ˊࡂळμވࣺ
ஃ჻ᇬ౵࿝௴႞Ⴎஶ౅ਜ਼ዅጀ౗එલૐဉ෰ሽ൘
ຫၦၡၿᅎ࿨છิઋඓ࿝ၨ༄౗࿌ၰཀఁఋ࿵"
@@@@
႞Ⴎஶ౅
ӡξԷ঄ҟ࣡ߝɁܤͤ੄ࠞݧۭߝ࠵ऀ
ၦხགྷஏဧၕၹพશዻཊགྷ࿼ၦຫဧ໕඗໏࿝௴
,-!,-!෰ሽ൘ᆚ႖ૺ࿝ఝዽთဠྦ႖
ෟၵ࿕ხᆹၦዅጀ౗࿌ၰཀఁఋ
ᆚ႖ૺ൐ຫဧዻૺ႖࿝ක౷ხགྷຫጃෟᆚ
႖ૺ෰ሽ൘ኟ෰ሽ൘ኟၕၦဧዽ႞ዜ࿝
႕ᎃ჎ၡዑགྷ൐ၪ࿌พཊགྷ࿼
ވਜ਼"੢႖ຫ၁ጔᆚ႖ఎၴ࿝௴>
ၡ႖ྮၦ፯൒ఁఋ႖౅ໜමᅰ൐ၦဧ
ዻ࿥ርᆹዻხൠཊགྷ࿼੢႖ವ௴੢႖
ຫਜ਼෧ແዾ༘ၰཀఁఋ
ǧǮ"੢႖၁ጔᆚ႖ૺྦ࿝࿌ಠྵᅰ
౅౹࿌ਜ਼ხྨ౅ഛዻཊགྷ࿼ຫဧၴਜ਼
੢႖ౙ༘ၰཀఁఋ
ࠕި"ጷື၁ጔิື၁ጔၕბၦ഍ඓ
,
-?)4<ᆚ႖ხൢᆚ႖ዻཊགྷ࿼
ఋ൏Ⴖ൅ၡ෰ሽ൘௴዆෧ዻ࿥ཅᅰ
ิືෟ႞ዜ໷ືၕ၉෧ዾ༘ၰཀఁఋ
ࠕި"ઠဨ࿝ಋೡᆚ႖ૺਜ਼႖ဴ࿝
࿨છౘືሲ࿝໏ᆚ႖ૺஏิၡிᆖౘ
ႚ႙ၦၦමჲചၨጄఎೢౙ༘ၰཀఁఋ
੧ᅪ໺ྩളු௯ጭၩವ௴௛႕ౘ
૵໵ໜൿხ౾ၡ႖౅ໜၦමჲၦᆚ႖
ૺၡ෰ሽ൘ၿᅎิ࿝౹࿌ਜ਼ხྨ౅ഛ
ጄ྽ጁఁఋ෰ሽ൘ၿᅎิ࿝෰ሽ൘ਜ਼
࿖ၕಕ௴ጃືᆚ႖ૺዯ೻૯൐႖ဴ࿝໏
๭௉ၒཊགྷ࿼ᅯ໴ዻૺ႖࿝౅ᆚ႖ૺၡ
ዯ೻૯൐๭ཊགྷ࿼
ըײݮӞؖܤؖ࠵ڊੂ̻࣡ߝɁޭݟި͒
Җ࣡ߝɁҗײݮੂܬԷ঄ҟ০ޜ࣡ߝੂ࠵ҧ
ڑڊ݃ᆚ႖ૺဉ෰ሽ൘ኟၔ໏ച൬௴႞ዜ
୶൘ຫဧዻ౅ഛ໕ઢ౗࿌ၰཀఁఋ
ޭπ࣡ߝɁ̻,-?)4<࣡ߝԷ঄ҟҗ࣡ߝੂ̻
ޭݟިݮΌѡײݮ੅ٟܝڇ͈͒ఋ൏ဧ౅ച
ຫဧዻඓጷႁ੢႖ವ௴੢႖ຫၡ၁ጔၦ
ၰཀఁఋ
࣡ߝɁҗ֞˅̤ܤ̆ࣝڊ१࠵ҧڑڊ݃
࣡ߝɁܯǢޜʴޜϜܤ̻ळμƢ͈۫Шਸ਼т
ȶҗ߃۫͠Ɂڑڊ݃૯೭྽႖ૺዯ೻૯ဉ
ᇬ౵ၡ໷ື၁ጔၦბ࿌౼ఁఋ
ळμ̻ײЬޭԱdž˅NJєˬܓ࠵࠵ۯǕϼ̻
۵ѕޜԭ࠵ۯΌѢ߀ΨтؖܯǢੂڑڊ݃
ܯ߆ळμ̻Ԭμڊ਽ݧ੄ǧݯܤҩײݮੂڑ
ڊ݃ิ႕ጁዽ࿨ၿᇬ౵൐ຫဧዻඓጷႁ
੢႖ವ௴੢႖ຫၡ၁ጔၦၰཀఁఋ
ܯ߆ळμ̻ۭߝޜވੋߜߣ੄ߝؚॠɁ)?/ި
ߥਣޜײݮੋ܄ੈ͈͒႖໓ၡ઎ၦხ฀ጭਜ਼
ၵၕ༘ഛᇛၦ๓ဧ೺ၦᇑჵఁఋ
ყ઎ၦხਜ਼ ઎ၦხพఋဧ೺ၦሞఁఋ
ዻ୾ၦືၡ࿨ၿᇬ౵൐ຫဧዾಕ࿝௴෥౵གྷ
ੜ࿨ၿᇬ౵ၡဉၦ࿌ሙૺਜ਼ᆊ໴ဉၦ࿌ሙૺ
พఋᇑ྽ጁఁఋ
઀ɁȗƢҨ੧˖ջǻܰޭԮ؈੅ٟ޷ޙԖѡ
࣡ߝɁ׾͕ܤӿLjޜ݆є̐dž˅ջμтݱਘӚ
ވܤ࣡ߝɁҗ̐࠵ҧڑڊ݃ක౷Ⴖ൅ၡ࿩ဴ
ၒചิሽ඀൘ಡ࿌ჰ၁ᆳ࿝ᆚ႖ૺ൐౞ཊགྷ࿼
ᆚ႖ૺ௴ᇛၦ༺ືఎ઴ዻఎ࿝ၰ௴ጲၕቛጄ
ጹૺ౛ఁఋ
ळμ˅ਸ਼тȶƢ৙ؾΟ࣡ߝɁ̻ײݮੂ࠵ҧڑ
ڊ݃ၦઠဨყགྷોᅰዻཊགྷ࿼
ƮੂǕջϑࣺdž˅ϨܓДҟ̻υޙѡޯੋ৙ؾ
Ο࣡ߝɁ̻޼Ζڊ१࠵ҧڑڊ݃ၦಕ௴ᆚ႖
ૺ൐લၨ໏๗༺໠ሽചਜ਼Ⴆਜ਼ཊགྷ࿼
ؖ֞ځ˅ٟҟƢ਽ݧ੅Ϝ̻࣡ߝɁҗੋࢷੂ࠵
ҬǮǹޯؖ֞ځا঄ѡƢ߭Ƣڑڊ݃ၹජႮ
൝ዾઠဨ੢႖੢႖ຫವ௴ጷႁၡ၁ጔၦ
ၰཀఁఋ
ࢶػҗੂɁߝܤ੊׾वاৃܤؖ࣡ߝɁळμ
җחޙڑڊ݃ȶд܄Ʃߝވਜ਼ޭ࠘ܓσ͈͒
෰ሽ൘ኟၕ๭௴ઇၒച௴ၦ೻ዽ၁ጔၦბ࿌
౹ხྨཀఁఋ
ߞͤѡᆚ႖ૺ੭൐ጀନ࿨છዻხൠཊགྷ࿼
ޭ࣡ߝɁ̻ਘࠗ>Ƣߣݮߝݻܤؖ޼ΖੂΌѢ
ǩΞܟڇ͈͒ϒШؖ͒Җߝ۵ޜޭݮੂܬޭ
࣡ߝɁҗײݮੂ࠵ҧڑڊ݃ၦຫጃၔᅍ೺ဧ
ᆚ႖ૺ࿝௴႕ဧ౗ხྨཀఁఋ

ը࠵ऀޜ߀եǽੋΥڑڊ݃
੄Ⱥը
t
t
t
t
19
࣡ߝɁ
,-!ᆚ႖ૺ࿝௴ō >6Q+Lෟ6Q50
෰ሽ൘൐ຫဧዾ༘ၰཀఁఋ
,-!ᆚ႖ૺ࿝௴ō >6Q+Lෟ6Q50
ವ௴4Q1WV෰ሽ൘൐ຫဧዾ༘ၰཀఁఋ
ၦ౹ᆚ႖ૺ௴Ⴎႜၦุዶဠዻඑਜ਼௻ዽዽ੝ఎᎁ
ၵ౏ዾ༘ၰ౅ഛ໕ઢ౗࿘ཀఁఋ
࣡ߝߞ࢔
၁ጔ"੢႖ຫ၁ጔᆚ႖ఎၴ࿝௴>
ၡ႖ྮၦ፯൒ఁఋ႖౅ໜමᅰ൐
ၦဧዻ࿥ርᆹዻხൠཊགྷ࿼੢႖ၦ୾
੢႖ຫၡ၁ጔၦၰཀఁఋ
෰ሽ൘ኟၕິၮዻૺ႖࿝ᆚ႖ૺRዯ೻૯൐
႕ጁዽᇮ໠ቼ࿝ାཀఁఋ
෰ሽ൘ኟPၕᆚ႖ૺ࿝ິၮጁఁఋᆚ႖ၦ
གྷၵ౗࿘ၗၕྩ൘௴๥੝຺ዑགྷ౾ᆚ႖თၦ
ઢ໵ଌ෢ၮఁఋ
๥੝຺ዑགྷ౾ၦઢ໵ᇣႦၰၒඓᆚ႖ၦဋഭౘ
ઇၮఁఋኟၦဋ႖ᎁᆚ႖౗ඓપ෡ചຫဧዻ੿୾
ᆚ႖ૺ࿝૯ఝച౞࿌౅౛ఁఋ
࣡ߝǻߣ
ྤ೭ዑ࿝໏෰ሽ൘ᆚ႖ືሲ൐ᅒႮዻཊགྷ࿼
ᆚ႖ືሲ
ᆚ႖თōōōō
ဋ႖ᆚ႖ౚ ōōōōōōōōōō
ጂᇯ౵ኟხ࿨ ōōōōōōōō
෰ሽ൘ኟોᅰ ҟҟҟҟҟҟҟҟҟ
බ႞ҟҟҟҟҟҟҟҟ
޻Ζҟ਴ьڊ
੉शμ০࠵ܯ
ᆚ႖ૺਜ਼ஞඳ್આ੿୾ஞඳᅍਜ਼ဪ෰ሽ
൘࿾౅൐ርხዻඓၴ౏ၒചጂᇯ౵ኟ
ხ࿨ၕགྷၵዻધ෰ሽ൘ਜ਼႕ႜ࿾౅࿝
౅ఐዾಕଆხᆚ႖ၕพ൅ጁఁఋ૯ఋၗ
ᆚ႖ૺ௴ၴ౏ၒചኟᆚ႖ක౵ച႖ጹ౛
ఁఋၦૺ௻ၔ෰ሽ൘༘඗ၕᆊఝዽ
࿨ၿጁఁఋ
ǻԵߝեੴ
෰ሽ൘ኟၦલૐ࿝໏ຫဧౙಕ௴઴౅ዽ෮႖ၒച
ิሽพጭ౛ఁఋ
ӡξԷ঄ҟ࣡ߝɁܤͤ੄ࠞݧۭߝ࠵ऀ
ોᅰ෰ሽ൘ኟၕ჎බዾಕ௴ଶᆽራച૯฀ጭဉ
ຫဧ႖ྮၕጀନ႕࿌჎ཊགྷ࿼ᆚ႖ૺဉ෰ሽ൘
ኟၡ႕ጁໜ࿝ఝጄ໏௴มຫဧ໕඗໏౮ิึၡ
ዑ൐ᅒႮዻཊགྷ࿼
෰ሽ൘ኟၔኞሠხ෣࿝໏௴ဋ႖ᆚ႖౗ხྨཀ
ఁఋ෰ሽ൘ኟ઴ᆚ႖ૺ൐ຫဧዻૺ႖࿝ྤ೭ၡ
ྦ႖ხᆹၕၪ࿌พཊགྷ࿼૯ఋၗဠ྾໕඗ౘ
ᆚ႖႗ᅍ൐ಋ്ཊགྷ࿼
ӡξ࠵ऀޜޱޙڑڊ݃
ƢܯأۼࢷƢځϼ̻ӆ࠵υ਍ԮأսވɁ
ܤؖԷ঄ҟҗ࣡ߝੂdž˅ײݮੂ࠵ҧڑڊ݃
ᆚ႖ૺ࿝໏෰ሽ൘൐๭੿୾୶ါಕൿხ୾
ჭૺ࿝ุၦ฿ၕ༘ၰཀఁఋ
,
-?)4<ᆚ႖ૺ࿝໏ൢ෰ሽ൘ኟၕᆚ႖ዻཊ
གྷ࿼
මၦ୾ૺረྵᅰ൐ተૺ੿୾ၦ೻ዽྵᅰ࿝
క૯ხҧڑڊ݃
݅ΌƢȈ+Ū.ޭ׾ޙѡ݆ШƢ̻߆ػܤ̻ؖ
ǹȗݐԷ঄ҟ০ޜեǽϼ̻ײݮੂ࠵ҧڑڊ݃
ܬҘࢱ࢝Ǯ˅ȼؼ߈Ljӿ˖ջυ
ވਜ਼"
ǧǮ"
1 / 1

DeWalt DC820 User manual

Category
Power tools
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document