Cisco 15454-CE-MR-10= Datasheet

Brand: Cisco

Model: 15454-CE-MR-10=

Category: Networking cards

Type: Datasheet

Data Sheet

Cisco ONS 15454 CE-Series 10-Port Multirate Ethernet

Card

The 10-port multirate Ethernet card for the Cisco

ONS 15454 Multiservice Provisioning

Platform (MSPP) enables the delivery of true carrier-class Ethernet Private Line services.

Product Overview

Through its portfolio of Ethernet service cards, the Cisco ONS 15454 MSPP has enabled service

providers and enterprises to effectively and efficiently expand their network capability from

transporting only time-division multiplexing (TDM) services to delivering multiple services over a

single, converged architecture and eliminating the need for multiple overlay infrastructures. With

the introduction of the Cisco ONS 15454 CE-Series 10-Port Multirate Ethernet Card (CE-MR), the

Cisco CE-Series card portfolio – which includes the 10/100 Mbps (CE-100) and the 1000 Mbps

(CE-1000) cards on the Cisco ONS 15454 and 15310 platforms – gives service providers the

ability to scale from 1.5-Mbps to 1-Gigabit Ethernet Private Line services. Additionally, the Cisco

CE-MR card provides the service flexibility for customers to deploy multirate Ethernet services

(10,100, 1000 Mbps) over a single card by supporting 10 Small Form-Factor Pluggable (SFP)-

based multirate ports.

The Cisco CE-MR (Figure 1) meets important requirements for an end-to-end Ethernet Private

Line application with features such as generic framing procedure (GFP), virtual concatenation

(VCAT), software link capacity adjustment scheme (LCAS and SW-LCAS), link integrity, and

comprehensive Ethernet and SONET statistics – including bandwidth utilization statistics and flow

control. The Cisco CE-MR, with GFP and VCAT, helps service providers and enterprises maximize

bandwidth utilization and promote industry-wide interoperability for Ethernet Private Line services.

With LCAS, the Cisco CE-MR gives service providers the flexibility to dynamically add and remove

bandwidth on Ethernet Private Line services. Ethernet and SONET statistics provide service-

monitoring capabilities. For example, bandwidth utilization statistics reveal the usage patterns of

end customers – data that can be critical for operations personnel or for network and business

planners. Features such as link integrity provide faster convergence capability to end customers’

Layer 2 networks connected through Ethernet private lines.

The Cisco ONS 15454 MSPP is the optical industry’s first metro optical transport platform. It

combines supercharged SONET/SDH transport, integrated optical networking (ITU grid

wavelengths and DWDM, for example), and unprecedented multiservice interfaces on demand

(such as TDM, Ethernet/IP, and storage) to deliver enormous economic benefits. The Cisco ONS

15454 provides the functions of multiple network elements in a single platform. As a critical

component of a complete, end-to-end, advanced service architecture from Cisco, the Cisco ONS

15454 delivers a scalable optical transport mechanism and the intelligent Ethernet/IP support to

cost-effectively deliver next-generation voice and data services.

Cisco continues its tradition of converged network services leadership with the introduction of the

CE-MR card to the Cisco CE-Series, enabling the efficient delivery of Ethernet Private Line

services without a major overhaul or redesign of existing transport infrastructure.

Data Sheet

Figure 1. Cisco ONS 15454 CE-Series 10-Port Multirate Ethernet Card

The Cisco CE-MR card includes the following features:

●

Ten multirate SFP-based Ethernet ports

●

Support for 10/1000/1000 Mbps SFP optics: 10/100/1000 Mbps BASE-T; 100 Mbps FX, LX,

BX; 1000 Mbps SX, LX, ZX

●

10-Gbps SONET/SDH transport bandwidth per card

●

Each multirate Ethernet port mapped to SONET/SDH (POS) using GFP-F (ITU-T G.7041)

or LAN Extension (LEX) High-Level Data Link Control (HDLC) encapsulation

●

Each POS can consist of high-order (HO) VCAT (SONET: STS-1-nv where n=1 to 21, STS-

3C-nv where n=1 to 7; SDH: VC-4-nv where n=1 to 7), (LO) VCAT (SONET: Vt1.5-nv where

n=1 to 64; SDH: VC-3-nv where n=1 to 21, VC12 where n=1 to 63) or contiguous

concatenation (CCAT) (SONET: STS-1, -3c, -6c, -9c, -12c, -24c, -48c; SDH: VC-4, -4-2c, -

4-3c, -4-4c, -4-8c, -4-16c) circuits

●

Dynamic capacity increment/decrement (LCAS or SW-LCAS) to VCAT circuits

●

Sub-50-millisecond (ms) SONET/SDH protection/restoration of CCAT transport circuits

●

Transparent to Layer 2 bridging, switching, Ethernet MAC control protocols (Cisco

EtherChannel® technology, 802.1x, Cisco Discovery Protocol, VLAN Trunking Protocol

[VTP], Spanning Tree Protocol), and VLAN (802.1Q and QinQ)

●

Ethernet link functions: autonegotiation, link speed auto sense, full/half duplex, flow control

(802.3x)

Data Sheet

●

QoS capabilities: Packet prioritization based upon IP type of service (ToS) or 802.1P

●

Jumbo packet support: 9600 bytes

●

A-to-Z provisioning (Cisco Transport Controller and Cisco Transport Manager), Transaction

Layer 1 (TL1) provisioning

●

Simple Network Management Protocol (SNMP) alarms and Remote Monitoring (RMON)

performance monitoring

●

Cisco Transport Controller/Cisco Transport Manager/TL1 management

●

Interoperation (over SONET/SDH) with Cisco G-Series and ML-Series cards

●

Back-pressure flow control

●

Terminal and facility loopback

●

Link integrity support

Applications

The Cisco CE-MR provides the flexibility to meet the demands of a wide variety of Ethernet Private

Line applications found within service provider and enterprise networks. Figures 2 and 3 outline a

few of the applications that can be met using the Cisco CE-MR cards.

Reliable Enterprise Networking

When the Cisco ONS 15454 MSPP is equipped with the CE-MR card, enterprise users can build

highly reliable multiservice networks to support data, voice, and video applications. Additionally, a

network based on a Cisco ONS 15454 provides the flexibility to support traditional TDM-based

services along with Ethernet services. The Cisco ONS 15454 provides transport scalability from

155 Mbps (OC-3/STM-1) up to 320 Gbps (32 10-Gbps wavelengths), positioning the enterprise

network for future growth (Figure 2).

Figure 2. Reliable Enterprise Networking

Private Line Carrier Ethernet

Data Sheet

A metropolitan network that supports a wide range of service capabilities allows service providers

to offer a tariff mix to meet each customer’s needs. The Cisco ONS 15454 provides the foundation

for building an advanced multiservice network over an extremely reliable SONET/SDH

infrastructure (Figure 3). The Cisco ONS 15454 with CE-Series cards facilitates the delivery of

data services such as transparent LAN services (TLS) or Internet access over a carrier-class

optical infrastructure supporting traditional TDM services. The Cisco CE-MR card, with VCAT and

LCAS functions, helps service providers offer a wide variety of Ethernet service-level agreements

(SLAs). Virtual concatenation (VCAT) provides a more efficient use of the transport bandwidth for

data user interfaces, and link capacity adjustment scheme (LCAS) provides an effective way for a

service provider to change the allocated bandwidth to each customer. Additionally, provisioning an

Ethernet circuit over a network equipped with a Cisco CE-MR card is easily accomplished through

the use of the Cisco ONS 15454’s embedded A-to-Z circuit provisioning wizard. The Cisco CE-MR

card also supports TL1-based provisioning to simplify integration with many embedded service

provider management systems.

Figure 3. Reliable Enterprise Network Using SDH/SONET Infrastructure

Product Specifications

Compact Design

●

Single-width card slot design for increased shelf flexibility and scalability

●

Up to 12 Cisco CE-Series cards per shelf assembly

●

Up to 120 Ethernet ports (10/100/1000 Mbps) per shelf assembly

Data Architecture Options

●

Point-to-point

●

Hub-and-spoke using multiple circuits

Data Sheet

Optical Transport Options

●

Unidirectional-path switched ring (UPSR) and subnetwork connection protection (SNCP)

●

2-fiber and 4-fiber bidirectional line switched ring (BLSR) and multiplex section-shared

protection ring (MS-SPR)

●

Automatic protection switching (APS) and subnetwork connection (SNC) (1+1 uni- or

bidirectional)

●

Path-protected mesh networking (PPMN)

●

Unprotected (0+1)

Table 1 outlines valid SONET and SDH circuit combinations for the Cisco CE-MR card according

to service type. Table 2 lists various product specifications for the Cisco CE-MR card.

Table 1. SONET and SDH Circuit Combinations

Service Type SONET Circuit Type SDH Circuit Type

1 Line-rate 1000 Mbps STS-1-21v

STS-3C-7v

STS-24C

STS-48c

VC4-7v

VC4-8C

VC-4-16c

VC3-21v

2 Sub-rate 1000 Mbps STS-1-nv , n = 1 to 20

STS-3C-nv, n = 1 to 6

STS-1, -3c, -6c, -9c, -12c

VC4-nv, n = 1 to 6

VC-4, -4-2c, -4-3c, -4-4c

VC3-nv, n = 1 to 20

3 Line-rate 100 Mbps STS-3c

STS-1-3v

STS-1-2v

VC4

VC3-2v

VC3-3v

VC12-50v

4 Sub-rate 100 Mbps STS-1

STS-1-1v

VT1.5-Xv (X = 1 to 64)

VC3

VC3-1v

VC12 (n = 1 to 49)

5 Line-rate 10 Mbps STS-1

VT1.5-Xv (X = 7)

VC12 (n = 5)

6 Sub-rate 10Mbps VT1.5-Xv (X = 1 to 6) VC12 (n = 1 to 4)

Table 2. Product Specifications

Attributes Description

Ports 10 SFP ports

Port speed 10/100/1000 Mbps

SFP types 10/100/1000 Mbps BASE-T; 100 Mbps FX, LX, BX; 1000 Mbps SX, LX, ZX

Duplex Full and autonegotiation

Flow control Supported

Transport Up to 10 “Virtual” POS (VCG) ports supporting HO-VCAT and LO-VCAT

Transport bandwidth per card* 10 Gbps in Cisco ONS 15454 slots 5,6,12,13

2.5 Gbps in Cisco ONS 15454 slots (1–4, 14–17)

Transport bandwidth allocation on

“virtual” POS (VCG) ports

SONET: STS-1-nv (n = 1 to 21), STS-3C-nv (n = 1 to 7), vt1.5-nv (n = 1 to 64),

STS-1, -3c, -6c, -9c, -12c, -24c, -48c;

SDH: VC-4-nv (n = 1 to 7), VC3-nv (n = 1 to 21), vc12-nv (n = 1 to 63), VC-4, -4-2c,

-4-3c, -4-4c, -4-8c, -4-16v

Transport bandwidth adjustment LCAS and SW-LCAS (dynamic addition and removal of bandwidth)

Ethernet-over-SONET encapsulation ITU-T G.7041 GFP-F, Cisco LEX, and Cisco HDLC options

QoS 802.1p and IP TOS-based prioritization

Frame size 64 to 9600 bytes

Data Sheet

Attributes Description

Link integrity Yes

Service provisioning A-to-Z service provisioning on Cisco Transport Controller, TL1-based service

provisioning

Maximum power 100W

Operating temperature 23 to 131°F (–5 to 55°C)

Operating humidity Noncondensing 5–95%

Dimensions (H x W x D) 12.65 x 0.72 x 9.99 in. (32.13 x 1.83 x 22.86 cm)

*Bandwidth usage restrictions when using LO-VCAT

Regulatory Compliance

EMC (Class A)

●

NEBS Bellcore GR-1089-CORE, Issue 3 (Level 3, Type 2, and Type 4)

●

IC ICES-003 Issue 3, 1997

●

FCC 47CFR15

●

ETSI 300-386-TC

●

EN55022, EN55024

●

CISPR 22, CISPR 24

●

VCCI V-3/2000.04

●

EN61000-6-1

●

Resolution 237 (Brazil)

Product Safety

●

NEBS Bellcore GR-1089-CORE, Issue 3 (Level 3, Type 2, and Type 4)

●

IEC 60950-1/EN 60950-1, First Edition (CB report/certificate with all country deviations)

●

UL and cUL/CSA 60950-1, First Edition

Laser Safety

●

EN or IEC-60825-2

●

IEC 60825-1 Amendment 2 (2001-01)

●

CSA60950-1 or IEC 60950-1/EN60950-1

●

21CFR1040 (Accession Letter and CDRH Report)

Environmental

●

NEBS Bellcore GR-63-CORE, Level 3

●

ETS 300 019-2-1 (Storage, Class 1.1)

●

ETS 300 019-2-2 (Transportation, Class 2.3)

●

ETS 300 019-2-3 (Operational, Class 3.1E)

System Requirements

Table 3 outlines the Cisco ONS 15454 system requirements for operation of the Cisco CE-MR

card.

Table 3. System Requirements

Data Sheet

System Parameter SONET SDH

Shelf assembly SA-ANSI, SA-HD SA-ETSI

Electrical Interface Assembly (EIA) panels or FMECs Not required Not required

Processor TCC2 or TCC2P TCC2 or TCC2P

Cross-connect XC-10G

XC-VXC-10G

XC-VXL-2.5

XC-VXL-10G

XC-VXC-10G

System software Release 8.5 or later (SONET) Release 8.5 or later (SDH)

Slot compatibility Slots 1 to 6, 12 to 17 Slots 1 to 6, 12 to 17

Ordering information

To place an order, visit the

Cisco Ordering Home Page. Table 4 outlines the ordering information

for the Cisco ONS 15454 CE-Series 10-Port Multirate Ethernet Card.

Table 4. Ordering Information

Product Description Part Number

Cisco CE-Series 10/100/1000-Mbps multirate Ethernet card, 10 ports, SONET system 15454-CE-MR-10=

Cisco CE-Series 10/100/1000-Mbps multirate Ethernet card, 10 ports, SDH system 15454E-CE-MR-10=

SFP – 10/100/1000 Ethernet BASE-T multirate copper RJ-45 ONS-SE-ZE-EL=

SFP – 10/100/1000 Ethernet BASE-T multirate copper RJ-45 ONS-SE-ZE-EL

SFP – 1000BASE-SX Gigabit Ethernet, 850 nm, MM, I-TEMP ONS-SI-GE-SX=

SFP – 1000BASE-SX Gigabit Ethernet, 850 nm, MM, I-TEMP ONS-SI-GE-SX

SFP – 1000BASE-LX Gigabit Ethernet, 1310 nm, SM, I-TEMP ONS-SI-GE-LX=

SFP – 1000BASE-LX Gigabit Ethernet, 1310 nm, SM, I-TEMP ONS-SI-GE-LX

SFP – 1000BASE-ZX Gigabit Ethernet, 1550 nm, SM, I-TEMP ONS-SI-GE-ZX=

SFP – 1000BASE-ZX Gigabit Ethernet, 1550 nm, SM, I-TEMP ONS-SI-GE-ZX

SFP – 100 Mbps Short Reach – 1310 nm, MM, LC, I-TEMP ONS-SI-100-FX=

SFP – 100 Mbps Short Reach – 1310 nm, MM, LC, I-TEMP ONS-SI-100-FX

SFP – 100 Mbps Long Reach – 1310 nm, SM, LC, I-TEMP ONS-SI-100-LX10=

SFP – 100 Mbps Long Reach – 1310 nm, SM, LC, I-TEMP ONS-SI-100-LX10

SFP – 10/100 BX-U, EXT ONS-SE-100-BX10U=

SFP – 10/100 BX-U, EXT ONS-SE-100-BX10U

SFP – 10/100 BX-D, EXT ONS-SE-100-BX10D=

SFP – 10/100 BX-D, EXT ONS-SE-100-BX10D

Service and Support

Cisco offers a wide range of services programs to accelerate customer success. These innovative

services programs are delivered through a unique combination of people, processes, tools, and

partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your

network investment, optimize network operations, and prepare the network for new applications to

extend network intelligence and the power of your business. For more information about Cisco

services, see

Cisco Technical Support Services or Cisco Advanced Services.

For More Information

For more information about the Cisco ONS 15454 MSPP, visit

http://cisco.com/en/US/products/hw/optical/ps2006/ps2010/index.html or contact your local

account representative.

Data Sheet

Printed in USA C78-425619-00 08/07

Cisco 15454-CE-MR-10= Datasheet

Brand: Cisco

Model: 15454-CE-MR-10=

Category: Networking cards

Type: Datasheet

Download PDF

report

Cisco 15454-CE-MR-10= Datasheet

Cisco 15454-CE-MR-10= Datasheet

Related papers

Other documents