PELER 6E
ENGLISH
EN - 7
Please pay attention when adding water to:
1. Unplug the appliance
2. Beforerelling,removeanyremainingwater
3. Use only clean water
4. Fill the water tank slowly
5. Payattentiontothefrontwaterleveldisplaywindowtonotexceedthemaximum
level
6. Lockthetankwiththesliderpin,topreventthetankfalling.
3 - OPERATING INSTRUCTIONS
- Beforeconnectingthepowersupply,pleasereadthesafetyprecautionsandmake
surethatthepowersocketvoltageconformstotherequirementsoftheair-cooler
unit.
- Afterturningonthepower,theair-coolerwillsoundBiBitwice,thenenterStandby
mode.AtthistimeotherkeysareinvalidexceptthePoweron/speedkey(Poweron
sound:BiBi,KeySound:Bi,Switchoffsound:Bi).
1. ON-OFF KEY:Onpressingthiskey,issuingaBisound,theapplianceentersnormal
workingstate.
Inworkingstate,pressingthisbuttonwillmakeaBisound,thenitwillgotostandby
status.
2. Speed Key:pressthiskeytoselectthedesiredventilationspeed,minimum,medium
ormaximum.
3. Swing Key:pressthiskeytoswitchoscillationon,theindicatorswitcheson;press
thekeyagain,theindicatorswitchesoff,andsoon.
4. Cooling Key:toswitchthecoolingfunctionon,relevantindicatorswitcheson;press
thebuttonagain,thecoolingfunctionandrelativeindicatorwillturnoff,andsoon.
4.1. WhentheCoolingfunctionturnson,thewaterpumpwillworkfor45secondsbefore
testingthewaterlevel;ifthewaterlevelremainsbelowthesetlevelfor5seconds,
thecoolingfunctionwillturnoffautomatically,andtheBiBisoundwilllastfor10
seconds.
5. Timer Key:Intheinitialstate, press thiskeytoopen the timerfunction,setting
model:1-2-3-1-2-3.....andsoon.
TheLEDindicatesacorrespondingtime.