2. AEROKLAS
  3. TRITON SU

AEROKLAS TRITON SU Installation guide

  • Hello! I am an AI chatbot trained to assist you with the AEROKLAS TRITON SU Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
CANOPY
INSTALLATION MANUAL
TRITON SU SPOILER
Installation time : 20 mins. For Spoiler
2 Put the drill-jigs into the nut.
MANUAL
Drill 3, 8, mm.
Model Number Issue Date Page
2/4
00
10 05 6//201
TRITON SU
COMPONNENT PART
Washer M6 = 3 Pcs.
Seal = 3 Pcs.
Adhesive tape = 3 Pcs.
Drill jig = 3 Pcs.
Spoiler = 1 Pcs.
Manual = 1 Pcs.
Screw M6 = 3 Pcs.
Rubber seal T1.5mm.=1set
TOOLS
No. mm.10
Cleaning cloth
1 Clean the install area with the cloth.
7 Remove seal on all adhesive tape.
5 Drill 3 mm. -diameter pilot holes into the
drill-jigs (4 position). Afterward remove
the drill-jigs. Drill 8 mm.- diameter until
through inner canopy.
4 Take off spoiler.
3 Place the spoiler with drill-jigs at install
position and stick the drill-jigs with
adhesive tape.
Page
34/
Model Number Issue Date
00
10 05 6//201
TRITON SU
300
6 Take off Rubber Plug 3 point .
Rubber seal
Adhesive tape
7mm.
SECTION: A
A
B
C
7mm.
SECTION: B,C
300
9 Inside canopy : Tighten screw set to the
nut of spoiler, (3 position).
Page
44/
Model Number Issue Date
00
10 05 6//201
TRITON SU
8 Put the spoiler into the nuts hole.
10 Put rubber-plug in the hole.
11 Install completely.
/