ABC Design Twister Operating instructions

Type
Operating instructions
Twister
- Door Hopser
- Stepless adjustable seat-height
- Weight: 3,4 kg
- Tested EN 14036
Dear Customer,
congratulations on the purchase of your ABC-Design Product. We are pleased that you have chosen one of our products
and hope that you will be completely satisfied with the service you receive from the product. We advise you to read the
instruction leaflet carefully before using the Twister. Keep this leaflet in a safe place for future reference. Kindly pay
attention to the washing and care instructions so that you enjoy trouble free use of your new purchase.
Your ABC Design Team
Hints for care and use
Hints for care and useHints for care and use
Hints for care and use
1. The manufacture of materials used in the fabrication of the production meet the standards required by the Deutsche Industrie Norm (DIN) for
clothing claimed light originality values. However, we advise you not to expose the product to the sun for a long time. Attrition and fading of the
colours during heavy solar radiation do not justify a damage claim. The fabric case of your Twister is washable. You can wash the case by hand or
machine coldwashing!
2. Regular care and maintance contribute to the safety and longevity of your product.
In adhearing to the aformationed hints you will enjoy satisfactory use of your ABC-Design product for a long time.
page 2
1. Mounting the Twister on the doorframe
1. Mounting the Twister on the doorframe 1. Mounting the Twister on the doorframe
1. Mounting the Twister on the doorframe
Turn the button to the left as far as possible, as shown ont
photo.
After turning the button pull the brackets apart, as shown on
the photo.
Pull the brackets apart as far as you are able to position the
one bracket on left side and the other on the right side on
the doorframe.
When you have positioned the bracket above the doorframe
then you can release the brackets slowly.
Please regard that the plastic parts on the brackets, leftside
and rightside, are lying above the doorframe, as shown on
the photo.
page 3
2. Height adjustment
2. Height adjustment2. Height adjustment
2. Height adjustment
Before tightening back the button you first have to adjust the
height.
If you want to adjust the Twister upwards you have to (1)
pull the strap with the Twister on it upwards . To release the
strap then (2) pull the end of the strap down.
If you want to adjust the Twister downwards (1) please take
the end of the strap an pull it upwards . Then move the
Twister together with the strap downwards.
When you fixed the height of the Twister, you can easily turn
the button again.
WARNING:
WARNING: WARNING:
WARNING: Never
NeverNever
Never adjust the height when a child is sitting
adjust the height when a child is sitting adjust the height when a child is sitting
adjust the height when a child is sitting
in the Twister!
in the Twister!in the Twister!
in the Twister!
page 4
3. Dismantling the Twister
3. Dismantling the Twister3. Dismantling the Twister
3. Dismantling the Twister
Turn the button to the left as far as possible as shown on
photo.
Pull the two brackets apart and you can remove the Twister
from the doorframe.
4. Belt adjustment
4. Belt adjustment4. Belt adjustment
4. Belt adjustment
Press the stab through the plastic part carefully.
When you have stripped off the stab, the plastic part has to
look as follows.
To adjust the strap arbitrary you first have to pull the strap
upwards. When you reached the wanted position you have
to push the strap back down into the mounting.
page 5
- Please read the instructions carefully before using and keep them for future reference.
- WARNING
WARNINGWARNING
WARNING: Never leave a child unsupervised in the Twister.
- WARNING
WARNINGWARNING
WARNING: Use only for limited periods e.g. 20 minutes at a time.
- WARNING
WARNINGWARNING
WARNING: Do not use until the child can sit up unaided.
- Maximum weight of the children. 12 kg.
- WARNING: DO NOT USE AS A SWING
WARNING: DO NOT USE AS A SWINGWARNING: DO NOT USE AS A SWING
WARNING: DO NOT USE AS A SWING!
!!
!
- WARNING: The twister must be fixed in the middle of the doorframe
WARNING: The twister must be fixed in the middle of the doorframeWARNING: The twister must be fixed in the middle of the doorframe
WARNING: The twister must be fixed in the middle of the doorframe!
!!
!
- WARNING
WARNINGWARNING
WARNING: Please make sure that your child sits save in the Twister.
- WARNING:
WARNING:WARNING:
WARNING: Don´t use the door if the Twister is fixed at the doorframe.
- WARNING
WARNINGWARNING
WARNING: Keep other children away from the twister during use.
- Maximum wide of the doorframe 40 cm.
- ATTENTION
ATTENTIONATTENTION
ATTENTION: Adjust the height of the Twister so that the feet of your child can touch the floor.
- WARNING
WARNINGWARNING
WARNING: Regularly inspect the Twister for loose damaged fittings and discontiniue use if
damaged or broken.
-
--
-
WARNING:
WARNING: WARNING:
WARNING: Keep the plastic-encasement away from children to prevent possible suffocation.
- Normal problems regarding to years of wear and damages through heavy uses is no reason for
reclamation.
- Damages which are caused by wrong using of this product are no reason for reclamation.
- Damages through wrong installations are no reason for reclamation.
- Damages through wrong using are no reason for reclamation.
- Parts of rust caused by missing servicing are no reason for reclamation.
- Scratches are normal damages and are no reasons for reclamation.
- Damp textile parts, which can’t be dried or mouldy parts, are no reason for reclamation.
- Through sun intensity, sweat, cleansing agent, rub-downs or often washings, the fabric colour can
fade out. And this is also no reason for a reclamation.
ABC Design GmbH
Dr. Rudolf-Eberle-Str. 29
D-79774 Albbruck
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

ABC Design Twister Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI