Abbey RY-XD01 User manual

ABBEY

(Air Purifier)

Formaldehyde Removal | Deodorization | Disinfection

User Manual

RY-XD01

Features

Formaldehyde Removal Deodorization Disinfection Environmental

Noiseless Built-in battery Touch switch

○ Convenient to use with simple design and touch buttons

○ Universal USB power interface and long battery life

○ Highly remove odor and gases to purify air

○ Decompose organic pollutants such as formaldehyde, benzene rapidly

○ Reactive oxygen sterilization, disinfection and mildew proofing

○ No consumables, no residual harmful substances

Accessories instruction

Host Lanyard USB cable User Manual

PAGE: 02

Operation instruction

1. Press the switch for 2 seconds, the device starts working (the first default mode is to commonly

remove formaldehyde, disinfect and deodorize), the buzzer then makes a sound “bee” with a blue

indicator light on, and the device automatically stops after working for 30 minutes.

2. Touch the switch again to start the second gear (deeply remove formaldehyde, disinfect and

deodorize), the buzzer then makes a sound “bee” with two blue indicator lights on, and the device

automatically stops after working for 60 minutes.

3. Touch the switch again, the buzzer then makes a sound “bee” and the device goes off.

4. Charging instruction:

A: Low battery: two red indicator lights flicker and the buzzer makes a sound “bee” for 1.5 seconds,

continually for 5 times;

B: While charging, the red indicator light intermittently flickers every 1.5 seconds.

C: While charging and working on the same time, one red indicator light is constantly ON in the first

gear and two red indicator lights are constantly ON in the second gear.

D: When it is fully charged, two green indicator lights are constantly ON.

5. When it is in working mode, the buzzer makes a sound “bee” for 3 times, when the device works for 5

minutes, this is a reminder that the device is under disinfection and formaldehyde removal procedure,

people and animals should leave the room at this time.

Technical parameters

Product name

ABBEY

Rated voltage

DC-5V

Product model

RY-XD01

Maximum power

2.5W

Product net weight

160g

Ozone concentration

20mg/Hour

Product size

Diameter: 98mm, thickness: 30mm

Applicable area

5-10m³

Package size

110*130*40mm

PAGE: 03

Applicable environments

Car Shoe cabinet Wardrobe Bedroom

Refrigerator Kitchen Toilette Bathroom

Warning

1. When the device is working, people and animals shall keep away from the working area.

2. This device should be charged with voltage of DC-5V, do not use non-standard adapter.

3. Do not operate the device or plug the power line with wet hands.

4. Please keep the device out of children.

5. If the device is not used for a long time, please put it in a dust-proof bag and place it in the right place.

6. Please clean with soft cloth, do not immerse in the liquid, and do not clean with gasoline and other

organic solvents.

7. If the damaged power line or other abnormal conditions are found, please send it to a professional

technician for repair, and do not repair by yourself.

8. This product is only used for the purposes specified in the manual but not be used for any other

purposes.

PAGE: 04

Maintenance

1. Keep the device case clean and free from dust.

2. Please clean the device with soft and dry cloth.

3. Do not put the device in the dusty, high heat or humid (relative humidity is above 80%) place.

Troubleshooting

Not working after turning on

1. Make sure the device is charged fully.

2. Make sure the adapter is properly connected, and the product is

connected to the adapter.

No response when charging

1. Make sure the charger is correct, coordinated to the adaptor’s

specification

2. Make sure the adapter is properly connected, and the product is

connected to the adapter.

Water goes into the device

accidentally

1. Turn off the device. If it is charging, turn it off and unplug the power

line.

2. Dry up with a soft and dry cloth.

3. Gently shake the device to drain the water as much as possible and

put in a safe place for 24 hours to dry naturally.

PAGE: 05

After-sales service card

Instructions:

Please fill in the warranty card carefully and keep it properly for service.

This device can enjoy one year free warranty from the date of purchase.

The following conditions are not free services:

1. Products damaged due to improper use or storage by users.

2. Damage caused by maintenance of non-company maintenance personnel.

3. No valid purchase certificate or with alteration.

4. Products with unstable voltage or beyond the specified range causing damage.

5. Products damaged by failure to comply with specifications.

6. Products beyond warranty period or beyond warranty range.

7. Products disassembled by oneself or repaired by a non-commissioned point of our company.

8. Products purchased by dealers without our company's authorization.

Product model______________________________________________________________________

Date of purchase____________________________________________________________________

User name_________________________________________________________________________

Contact number_____________________________________________________________________

Address____________________________________________________________________________

Malfunction description________________________________________________________________

PAGE: 06

Abbey RY-XD01 User manual

Abbey RY-XD01 User manual

Other documents