Eglo 89587A Installation guide

Type
Installation guide
您正在使用
ZWCAD 2008i 试用版
详情请查阅WWW.ZWCAD.COM
Safety Precautions:
1.Turn off electrical power before starting installation of light fixture.Do not remove insulation from
fixture.
2.This product must be installed in accordance with the applicable installation code by a person
familiar with the construction and operation of the product and the hazards involved.
NOTE: product may not look exactly as shown in figures.
Mesures de Sécurité:
1.Fermez le courant au disjoncteur avant de debuter l'installation de la fixture. N'enlevez pas
l'isolation de la fixture.
2.Ce produit doit être installé selon le code d'installation pertinent, par une personne qui connaît
bien le produit et son fonctionnement ainsi que les risques inhérents.
N.B.: peut différer de illustration.
Precauciones de seguridad
1.Corte la corriente eléctrica antes de comenzar la instalación de la lámpara.no quite la protección
del producto.
2.Este producto debe ser instalado segun el código de instalación aplicable por una persona que conozca
la construcción y el funcionamiento del producto y los riesgos que supone.
NOTA:el producto puede no ser exactamente igual al mostrado en la figura.
B
名称
日期
ERP编号
通用
货号
EGLO产品装配说明书
V: 1.0
版次
ew
SHENGDA
LIGHTING
89587A
美规斯比科 E17 单头射灯
A
OFF
C
ON
INSTRUCTIONS
INSTRUCCIONES
89587A
Imported by /Importé par /Importado por Eglo Canada Inc. / Eglo USA Inc.
www.eglo.com
批准/日期
审核/日期
绘图/日期
日期修改人
修改内容
版次
张金虎090908
王组云090908
罗功龙090908
2
GROUND/MISE A LA TERRE/TIERRA
BLACK/NOIR/NEGRO
WHITE/BLANC/BLANCO
3
1
4
5
7
6
  • Page 1 1

Eglo 89587A Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI