Eglo 20446A Installation guide

Type
Installation guide
INSTRUCTIONS
INSTRUCCIONES
20446A
修改内容版次 日期修改人
孙四兵100202绘图/日期
审核/日期
批准/日期
20446A
SHENGDA
LIGHTING
ew
版次
V: 1.0
货号
通用
ERP编号
日期
美规洛维高单头吊灯
EGLO产品装配说明书
名称
Imported by /Importé par /Importado por Eglo Canada Inc. / Eglo USA Inc.
www.eglo.com
ON
C
OFF
A
B
Safety Precautions:
1.Turn off electrical power before starting installation of light fixture.Do not remove insulation from
fixture.
2.This product must be installed in accordance with the applicable installation code by a person
familiar with the construction and operation of the product and the hazards involved.
NOTE: product may not look exactly as shown in figures.
Mesures de Sécurité:
1.Fermez le courant au disjoncteur avant de debuter l'installation de la fixture. N'enlevez pas
l'isolation de la fixture.
2.Ce produit doit être installé selon le code d'installation pertinent, par une personne qui connaît
bien le produit et son fonctionnement ainsi que les risques inhérents.
N.B.: peut différer de illustration.
Precauciones de seguridad
1.Corte la corriente eléctrica antes de comenzar la instalación de la lámpara.no quite la protección
del producto.
2.Este producto debe ser instalado segun el código de instalación aplicable por una persona que conozca
la construcción y el funcionamiento del producto y los riesgos que supone.
NOTA:el producto puede no ser exactamente igual al mostrado en la figura.
10
8
7
6
5
4
3
2
1
9
11
12
13
14
GROUND/MISE A LA TERRE/TIERRA
BLACK/NOIR/NEGRO
WHITE/BLANC/BLANCO
  • Page 1 1

Eglo 20446A Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI