BenQ PD2720U User manual

LCD Monitor

User Manual

DesignVue Designer Monitor | PD Series

2

Copyright

be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any

language or computer language, in any form or by any means, electronic, mechanical, magnetic,

optical, chemical, manual or otherwise, without the prior written permission of BenQ

Corporation.

Disclaimer

BenQ Corporation makes no representations or warranties, either expressed or implied, with

respect to the contents hereof and specifically disclaims any warranties, merchantability or

fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this

publication and to make changes from time to time in the contents hereof without obligation of

BenQ Corporation to notify any person of such revision or changes.

The performance of flicker-free may be affected by external factors such as poor cable quality,

unstable power supply, signal interference, or poor grounding, and not limited to the above

mentioned external factors. (Applicable for flicker-free models only.)

BenQ ecoFACTS

BenQ has been dedicated to the design and development of greener product as part of its

aspiration to realize the ideal of the "Bringing Enjoyment 'N Quality to Life" corporate vision

with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory

requirement and standards pertaining to environmental management, BenQ has spared no

efforts in pushing our initiatives further to incorporate life cycle design in the aspects of

material selection, manufacturing, packaging, transportation, using and disposal of the products.

BenQ ecoFACTS label lists key eco-friendly design highlights of each product, hoping to ensure

that consumers make informed green choices at purchase. Check out BenQ's CSR Website at

http://csr.BenQ.com/ for more details on BenQ's environmental commitments and

achievements.

3

Power Safety

• The AC plug isolates this equipment from the AC supply.

• The power supply cord serves as a power disconnect device for pluggable equipment. The

socket outlet should be installed near the equipment and be easily accessible.

• This product should be operated from the type of power indicated on the marked label. If you

are not sure of the type of power available, consult your dealer or local power company.

• The Class I pluggable equipment Type A must be connected to protective earth.

• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm

2

must

be used.

For Germany only:

• (If the weight of the product is less than or equal to 3 kg) An approved power cord greater or

equal to H03VV-F, 3G, 0.75mm

2

must be used.

• (If the weight of the product is more than 3 kg) An approved power cord greater or equal to

H05VV-F or H05RR-F, 3G, 0.75mm

2

must be used.

• (If a remote control is provided) RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE

INSTRUCTIONS.

For models with adapter:

• Use only the power adapter supplied with your LCD Monitor. Use of another type of power

adapter will result in malfunction and/or danger.

• Allow adequate ventilation around the adapter when using it to operate the device or charge

the battery. Do not cover the power adapter with paper or other objects that will reduce

cooling. Do not use the power adapter while it is inside a carrying case.

• Connect the power adapter to a proper power source.

• Do not attempt to service the power adapter. There are no service parts inside. Replace the

unit if it is damaged or exposed to excess moisture.

Care And Cleaning

• Do not place the monitor face down on the floor or a desk surface directly. Otherwise,

scratches on the panel surface may occur.

Please follow these safety instructions for best performance, and long life for your monitor.

0~3000 m10~90 %0~40 C 0~12000 m10~60 %-20~60 C

4

• The equipment is to be secured to the building structure before operation.

• (For models that support wall or ceiling mounting)

• Install your monitor and monitor mounting kit on a wall with flat surface.

• Ensure that the wall material and the standard wall mount bracket (purchased separately) are

stable enough to support the weight of the monitor.

• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.

• Always unplug the product from the power outlet before cleaning. Clean the LCD monitor

surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.

• Slots and openings on the back or top of the cabinet are for ventilation. They must not be

blocked or covered. Your monitor should never be placed near or over a radiator or heat

sources, or in a built-in installation unless proper ventilation is provided.

• Do not place heavy loads on the monitor to avoid possible personal injury or damage to the

monitor.

• Consider keeping the box and packaging in storage for use in the future when you may need

to transport the monitor.

• Refer to the product label for information on power rating, manufacture date, and

identification markings.

Servicing

• Do not attempt to service this product yourself, as opening or removing covers may expose

you to dangerous voltages or other risks. If any of the above mentioned misuse or other

accident such as dropping or mishandling occurs, contact qualified service personnel for

servicing.

• Contact your place of purchase or visit the local website from www.BenQ.com for more

support.

Caution

• The monitor should be 50 ~ 70 cm (20 ~ 28 inches) away from your eyes.

• Looking at the screen for an extended period of time causes eye fatigue and may deteriorate

your eyesight. Rest your eyes for 5 ~ 10 minutes for every 1 hour of product use.

• Reduce your eye strain by focusing on objects far way.

• Frequent blinking and eye exercise help keep your eyes from drying out.

5

Typographics

In this document, the steps needed to reach a menu may be shown in condensed form, for

example: Menu > System > Information.

Icon / Symbol Item Meaning

Warning Information mainly to prevent the damage to components,

data, or personal injury caused by misuse and improper

operation or behavior.

Tip Useful information for completing a task.

Note Supplementary information.

6

Table of Contents

Copyright ......................................................................................................................................2

Getting started .............................................................................................................................8

Getting to know your monitor ............................................................................................. 11

Front view.................................................................................................................................................. 11

Bottom view.............................................................................................................................................. 11

Back view ................................................................................................................................................... 12

Connections .............................................................................................................................................. 14

How to assemble your monitor hardware ........................................................................ 19

How to detach the stand ....................................................................................................................... 27

Adjusting the monitor height ................................................................................................................ 29

Rotating the monitor (PD2720U / PD3220U only) ......................................................................... 30

Viewing angle adjustment ....................................................................................................................... 31

Using the monitor wall mounting kit ................................................................................................... 32

Getting the most from your BenQ monitor ...................................................................... 33

How to install the monitor on a new computer .............................................................................. 34

How to upgrade the monitor on an existing computer ................................................................. 35

How to install on Windows 10 system .............................................................................................. 36

How to install on Windows 8 (8.1) system .......................................................................................37

How to install on Windows 7 system ................................................................................................ 38

How to adjust your monitor ................................................................................................. 39

The control panel..................................................................................................................................... 39

5-way controller and basic menu operations .................................................................................... 40

Working with the hot keys.................................................................................................................... 42

Hotkey Puck G2 and its basic operations .......................................................................................... 44

Adjusting Display Mode....................................................................................................................... 46

Choosing an appropriate color mode................................................................................................. 46

Working with two video sources (KVM Switch).......................................................................... 46

Video source selection in PIP mode.................................................................................................... 48

Video source selection in PBP mode................................................................................................... 49

Connecting multiple monitors (Thunderbolt™ 3 daisy chaining)(PD2720U / PD3220U) ..... 49

Working with HDR technology............................................................................................................ 50

Working with two color settings on the same image (DualView) ............................................ 51

Navigating the main menu ...................................................................................................... 53

Input menu ............................................................................................................................................... 54

Picture menu .......................................................................................................................................... 57

Color menu .............................................................................................................................................. 59

Audio menu ............................................................................................................................................. 64

KVM Switch menu ................................................................................................................................ 65

Custom Key menu ................................................................................................................................ 67

System menu .......................................................................................................................................... 69

Troubleshooting ........................................................................................................................74

Frequently asked questions (FAQ)....................................................................................................... 74

Need more help?...................................................................................................................................... 76

10/23/19

8 Getting started

Getting started

When unpacking please check you have the following items. If any are missing or damaged,

please contact the place of purchase for a replacement.

BenQ LCD Monitor (PD2720U)

(PD3220U)

(PD3420Q)

Monitor Stand

Monitor Base

Back Cover

9 Getting started

Quick Start Guide

CD-ROM

Installation Guide

Power Cord

(Picture may differ from product supplied

for your region.)

Video Cable: DP to mini DP

Video Cable: HDMI

Video Cable: Thunderbolt™ 3

(Optional accessory for models with

Thunderbolt™ 3 inputs)

A Thunderbolt™ 3 passive cable that supports

up to 40 Gb/s data transfer.

Video Cable: USB-C™

(Optional accessory, purchased separately)

The length of USB-C™ cable should be less

than 1 meter to make the connection easy.

10 Getting started

USB Cable

Hotkey Puck G2

• Available accessories and the pictures shown here may differ from the actual contents and the product supplied

for your region. And the package contents may subject to change without prior notice. For cables that are not

supplied with your product, you can purchase them separately.

• Consider keeping the box and packaging in storage for use in the future when you may need to transport the

monitor. The fitted foam packing is ideal for protecting the monitor during transport.

Always keep the product and accessories out of reach of small children.

11 Getting to know your monitor

Getting to know your monitor

Front view

Bottom view

(PD2720U) (PD3220U)

(PD3420Q)

1. Power LED indicator

1

2. Speakers

22

12 Getting to know your monitor

Back view

(PD2720U) 3. Power button

4. Control keys

5. Headphone jack

6. (PD2720U/PD3220U) USB 3.1

Gen 2 ports

(PD3420Q) USB 3.1 Gen 1 ports

(downstream; connecting to the

USB devices)

7. (PD2720U/PD3220U) USB 3.1

Gen 2 port

(PD3420Q) USB 3.1 Gen 1 ports

(upstream; connecting to the

PC)

8. Hotkey Puck G2 socket

9. HDMI1 socket

10. HDMI2 socket

11. DisplayPort socket

12. Thunderbolt™ 3 socket 1 (*)

13. Thunderbolt™ 3 socket 2 (**)

14. Kensington lock slot

15. AC power input jack

16. USB-C™ port (for data transfer

only)

17. USB-C™ port (for data transfer

and power delivery up to 65W)

(PD3220U)

(PD3420Q)

3

4

5 6 789101112131415

3

4

5

6 7 8 9 10 11 12 13 14

16

6

15

4

7

15

10 17 6 14

16

6

3

5

98

11

13 Getting to know your monitor

• *: 1) Thunderbolt™ 3 with up to 40Gbs bandwidth; 2) supports up to two 4K monitors by daisy chain; 3)

power delivery up to 85W (PD3220U) or 65W (PD2720U). See Power delivery of Thunderbolt™ 3 ports on

your monitor (PD2720U / PD3220U only) on page 17 for more information.

• **: 1) Thunderbolt™ 3 with up to 40Gbs bandwidth; 2) supports up to two 4K monitors by daisy chain; 3)

power delivery up to 15W (PD3220U / PD2720U). See Power delivery of Thunderbolt™ 3 ports on your

monitor (PD2720U / PD3220U only) on page 17 for more information.

• With Thunderbolt™ 3 video input, the USB data transmission speed is up to USB 3.1 Gen 2.

With DP or HDMI video input, the USB data transmission speed is up to USB 3.1 Gen 1.

• Above diagram may vary depending on the model.

• Picture may differ from product supplied for your region.

14 Getting to know your monitor

Connections

The following connection illustrations are for your reference only. For cables that are not

supplied with your product, you can purchase them separately.

For detailed connection methods, see page 23 - 24.

33

PC / Notebook

Headphone/

Speakers

USB

peripherals

External graphics card /

storage / monitor

PD2720U

15 Getting to know your monitor

33

PC / Notebook

Headphone/

Speakers

USB

peripherals

External graphics card /

storage / monitor

PD3220U

USB

peripherals

16 Getting to know your monitor

PC / Notebook

Headphone/

Speakers

USB

peripherals

PD3420Q

USB

peripherals

17 Getting to know your monitor

Connectivity of Thunderbolt™ 3 port on your monitor (PD2720U /

PD3220U only)

The Thunderbolt™ 3 ports on your product are compatible with Thunderbolt™ 3 and

USB-C™ connectors. The connectivity, however, may vary depending on the cable used and

the capability of the connected computer.

Power delivery of Thunderbolt™ 3 ports on your monitor (PD2720U /

PD3220U only)

With the power delivery function, your monitor helps supply power to the connected

Thunderbolt™ 3 devices. Available power varies by port. Make sure the devices are connected

to the appropriate ports to be activated properly with sufficient power.

Computer’s port

for connection

Cable for connection

Monitor’s port for

connection

Connectivity

Thunderbolt™ 3

port

• Passive Thunderbolt™

3 cable (as provided)

• USB-C™ cable

(purchased separately)

Thunderbolt™ 3

port

OK

USB-C™ port Passive Thunderbolt™ 3

cable (as provided)

Thunderbolt™ 3

port

OK

USB-C™ port Active Thunderbolt™ 3

cable (purchased

separately)

Thunderbolt™ 3

port

OK (*)

USB-C™ port USB-C™ cable

(purchased separately)

Thunderbolt™ 3

port

OK

• The length of USB-C™ cable should be less than 1 meter to make the connection easy.

• *: The connectivity is available only when working with compatible Intel IC launched in 2019. Make sure you

have a compatible IC before purchasing the cable.

PD3220U PD2720U

Thunderbolt™ 1

()

Thunderbolt™ 2

()

Thunderbolt™ 1

()

Thunderbolt™ 2

()

5V / 3A 5V / 3A 5V / 3A 5V / 3A

9V / 3A N/A 9V / 3A N/A

15V / 3A N/A 15V / 3A N/A

20V / 4.25A N/A 20V / 3.25A N/A

18 Getting to know your monitor

Power delivery of USB-C™ ports on your monitor (PD3420Q only)

With the power delivery function, your monitor helps supply power to the connected

USB-C™ devices. Available power varies by port. Make sure the devices are connected to the

appropriate ports to be activated properly with sufficient power.

• A connected device needs to be equipped with a USB-C™ connector that supports charging

function via USB power delivery.

• The connected device can be charged via USB-C™ port even when the monitor is in power

saving mode.(*)

• The USB power delivery is up to 65W. If the connected device requires more than 65W for

operation or for boot up (when the battery is drained), use the original power adapter that

came with the device.

• The information is based on the standard testing criteria and is provided for reference. The

compatibility is not guaranteed as the user environments vary. If a separately purchased

USB-C™ cable is used, make sure the cable is certified by USB-IF and is full-featured, with

power delivery and video / audio / data transfer functions.

PD3420Q

USB-C™ 65W

(on the rear of the monitor)

USB-C™

(on the left side of the monitor)

5V / 3A 5V / 1.5A

9V / 3A N/A

12V / 3A

N/A

15V / 3A N/A

20V / 3.25A N/A

*: Charging via USB-C™ in monitor power saving mode is available when the USB-C Awake function is

enabled. Go to System > USB-C Awake and select ON.

19 How to assemble your monitor hardware

How to assemble your monitor hardware

• If the computer is turned on you must turn it off before continuing.

Do not plug-in or turn-on the power to the monitor until instructed to do so.

• The following illustrations are for your reference only. The location and available input and output jacks may

vary depending on the purchased model.

Avoid finger pressure on the screen surface.

1. Attach the monitor base. (PD3420Q)

Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a

mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor

around on your desk will scratch or damage the monitor surround and controls.

While the monitor is still inside the box, remove the

cushion that protects the back of the monitor.

Remove the foam wrap from the monitor stand and

base. Attach the monitor stand to the monitor base as

illustrated.

Raise the thumbscrew lid and tighten the thumbscrew

as illustrated. Then push the lid back.

2

1

20 How to assemble your monitor hardware

Unfold the front side of the box as illustrated to leave

some room for stand and base attachment.

Open the foam wrap that protects the monitor.

Lift the end of the monitor stand high and orient and

align the stand arm with the monitor, then push them

together until they click and lock into place.

Take the monitor out of the box by holding the stand

arm. Carefully lift the monitor, turn it over and place it

upright on its stand on a flat even surface.

As the product is heavy, you may need assistance from

another person to balance and ensure safety.

Remove the foam wrap from the monitor. Continue with Connect the PC video cable. on page 23 to

complete the hardware assembly.

1. Attach the monitor base. (PD2720U / PD3220U)

Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a

mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor

around on your desk will scratch or damage the monitor surround and controls.

1

2

Page is loading ...

BenQ PD2720U User manual

This manual is also suitable for

BenQ PD2720U User manual

Related papers

Other documents