2. Toro
  3. Trimmer Mount Kit, Z Master 3000, 5000, or 6000 Series Riding Mower

Toro Trimmer Mount Kit, Z Master 3000, 5000, or 6000 Series Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Trimmer Mount Kit, Z Master 3000, 5000, or 6000 Series Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3422-358RevB
TrimmerMountKit
ZMaster
®
3000,5000,or6000SeriesRidingMower
ModelNo.137-9769
InstallationInstructions
Safety
SafetyandInstructional
Decals
Safetydecalsandinstructionsare
easilyvisibletotheoperatorandare
locatednearanyareaofpotential
danger.Replaceanydecalthatis
damagedormissing.
decal117-0346
117-0346
1.Fuel-leakhazard—readtheOperator'sManual;donot
attempttoremovetherollbar;donotweld,drill,ormodify
therollbarinanyway.
©2018—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3422-358*B
Installation
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Movethemotion-controlleverstotheNEUTRAL-LOCKposition.
3.Engagetheparkingbrake.
4.Shutofftheengineandremovethekey.
g037289
Figure1
2
2
AssemblingtheUpper
TrimmerMountAssembly
Partsneededforthisprocedure:
1Uppertrimmermountbracket
1
Largestclamp
1Largebackerplate
2
Carriagebolt(1/4x1-1/2inches)
2
Flangenut(1/4inch)
Procedure
Assembletheuppertrimmermountassembly(Figure
2).
g249810
Figure2
1.Flangenut(1/4inch)
4.Uppertrimmermount
bracket
2.Largebackerplate
5.Carriagebolt(1/4x1-1/2
inches)
3.Largestclamp
3
InstallingtheSupport
Bracket
Partsneededforthisprocedure:
1
Supportbracket
2Tubespacer
2
Carriagebolt(3/8x3inches)
2
Flangenut(3/8inch)
Procedure
1.Lowertherollbar.
2.Installthesupportbrackettotherightpostofthe
rollbarusing2tubespacers,2carriagebolts
(3/8x3inches),and2angenuts(3/8inch)as
showninFigure3.
3.Raisetherollbar.
g248751
Figure3
1.Supportbracket
3.Tubespacer
2.Flangenut(3/8inch)4.Carriagebolt(3/8x3
inches)
3
4
ApplyingtheDecal
Partsneededforthisprocedure:
1Decal117-0346
Procedure
Ifdecal117-0346isappliedtotherightpostofthe
rollbaronyourmachineandthesupportbracketnow
coversthatdecal,applythenewdecaltotheinner,
lowersideoftherightpostoftherollbar(Figure4).
Note:Ifdecal117-0346isnotappliedtotheright
postoftherollbaronyourmachine,discardthedecal.
g249924
Figure4
1.Applythenewdecalhere.2.Existing,covereddecal
5
SecuringtheUpper
TrimmerMountAssembly
totheSupportBracket
Partsneededforthisprocedure:
2
Carriagebolt(5/16x7/8inch)
2
Flangenut(5/16inch)
Procedure
Securetheuppertrimmermountassemblytothe
supportbracketusing2carriagebolts(5/16x7/8inch)
and2angenuts(5/16inch)asshowninFigure5.
Note:Multiplemountingholelocationsareprovided
toadjustthemountingpositionofthetrimmerfor
clearance.
g249811
Figure5
1.Uppertrimmermount
assembly
3.Carriagebolt(5/16x7/8
inch)
2.Supportbracket4.Flangenut(5/16inch)
4
6
InstallingtheLower
TrimmerMountAssembly
Partsneededforthisprocedure:
1Lowertrimmermountassembly
2
Carriagebolt(3/8x1inch)
2
Flangenut(3/8inch)
Procedure
Installthelowertrimmermountassemblytothe
tie-downhookmountinglocationonthefront,right
sideoftheframeusing2carriagebolts(3/8x1inch)
and2angenuts(3/8inch)asshowninFigure6.
g249903
Figure6
1.Flangenut(3/8inch)
3.Lowertrimmermount
assembly
2.Carriagebolt(3/8x1inch)
7
AssemblingtheTrimmer
MountBracket
Partsneededforthisprocedure:
1Trimmermountbracket
1Fist-mountplate
1
Smallstclamp
1
Smallbackerplate
4
Flangenut(1/4inch)
2
Carriagebolt(1/4x3/4inch)
2
Carriagebolt(1/4x1-1/4inches)
Procedure
Assemblethetrimmermountbracket(Figure7).
g248809
Figure7
1.Flangenut(1/4inch)5.Carriagebolt(1/4x1-1/4
inches)
2.Smallbackerplate
6.Trimmermountbracket
3.Smallstclamp7.Carriagebolt(1/4x3/4
inch)
4.Fist-mountplate
5
8
SecuringtheTrimmer
MountBrackettotheLower
TrimmerMountAssembly
Partsneededforthisprocedure:
2
Carriagebolt(1/4x3/4inch)
2
Flangenut(1/4inch)
Procedure
1.Fullylowerthemowerdeck.
2.Securethetrimmermountbracketassembly
tothelowertrimmermountassemblyusing2
carriagebolts(1/4x3/4inch)and2angenuts
(1/4inch)asshowninFigure8.
Note:Multiplemountingholelocationsare
providedtoadjustthemountingpositionofthe
trimmerforclearance.
g248811
Figure8
1.Trimmermountbracket3.Lowertrimmermount
assembly
2.Carriagebolt(1/4x3/4
inch)
4.Flangenut(1/4inch)
9
SecuringaTrimmertothe
MountAssemblies
NoPartsRequired
Procedure
Insertthehandleendofthetrimmerintothelargest
clampandthetrimmingendintothesmallstclamp.
Checkthetofthetrimmerforinterference,and
adjustthemountingholelocationsasrequiredfor
clearancetothemachine.
6
Notes:
/