STANDBY GENERATOR ACCESSORIES
Maintenance Kits
Liquid-Cooled Engines
Model 5655
Model 5656
Model 5657
Model 5658
Model 5659
Model 5660
OIL RECOMMENDATIONS
DESCRIPTION
Preventative maintenance is a necessity for all standby generators.
The Liquid-Cooled Scheduled Maintenance Kits offer all the hardware
necessary to perform a complete maintenance on Generac liquid-
cooled generators. Oil and coolant will need to be purchased
separately based upon manufacturer recommendations listed below.
Maintenance is recommended at every 200 hours or 2 years. If
running in a dusty environment, more frequent maintenance may be
required. Further maintenance details can be found in the generator
owner’s manual.
KIT CONTENTS
Kit Model 5655 5656 5657 5658 5659 5660
Engine Size 1.6L 2.4L 3.0L 4.2L 4.6L 6.8L
Air Filter
• • • • • •
Pre-Cleaner
• • • •
Oil Filter
• • • • • •
Spark Plug(s)
4 4 6 8 8 10
Spark Plug Wrench
• • • • •
Oil Funnel
• • • • • •
Chamois
• • • • • •
Reminder Sticker
• • • • • •
*Contents of kits may vary
SAE 30
Synthetic 5W-30
10W-30
Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • generac.com
©2008 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0177510SBY/Printed in U.S.A. 04.08, rev. 05.08