Legrand G6007C-1 Installation guide

Category
Cable trays
Type
Installation guide
V6007C-1
G6007C-1
CG6007C-1
Device Plate
Installation Instructions
Listed
368B
Made in U.S.A.
The Wiremold Company, West Hartford, CT 06133
40453 495
1
Install G6000C cover on raceway up to
location of 6007C-1.
3
Snap top of 6007C-1 into raceway. Tighten
four screws and pull out wire loops.
4
Wire device and mount on 6007C-1. Install
G6000C abutting 6007C-1, and assemble
standard flush plate.
2
Back off screws in 6007C-1 and engage
6007C-1 with lower raceway flange.
Location of 6007C-1
6007C-1
6007C-1
G6000C
Standard
Flush plate
Latch plate
Depress
two screw
heads for
latch
clearance
G6000C
6007C-1
Raceway
Raceway
  • Page 1 1

Legrand G6007C-1 Installation guide

Category
Cable trays
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI