Titan Fitness Single Motor Electric Adjustable Height A2 Sit-Stand Desk User manual

Titan Fitness
Brand
Titan Fitness
Model
Single Motor Electric Adjustable Height A2 Sit-Stand Desk
Type
User manual

This manual is also suitable for

MPN:
SKU:
UPC:
Titan Distributors Inc. 1 800-605-8241
141 Eastley St. Ste. 113
Collierville, TN 38017
WA2 Electric Height
adjustable desk frame
WA2 series using instruction
A2 Standing
Desk Frame
OWNER'S MANUAL
MPN: A2FRAME
SKU: 403021
A2 series parameter instruction
Electric Control Part:
Input Voltage:100-240V can be use
Output Voltage:24V DC 2.0A
Duty cycle:10%MAX 2min on 18 min off
Switch power supply,low energy consumtion
Manual device can move and long press
Desk frame part:
built-in limit switch
Dynamic load:40KG
The maximum static load:80KG
Load speed:20mm/s
Lift range:680mm---1160mm
The length of the adjusting range:1100mm~1600mm
Other part:
Packing Size：1080*270*325mm 1Set
Gross weight:37KG
Safety and warnings
This appliance can be used by children aged from 8 years and above and persons
withreduced physical,sensory or mental capabilities or lack of experience and
knowledge if they have been fiven supervision or instruction concerning use of
the appliance in asafe way and understand the hazards involved.Children shall not play
with the appliance.Cleaning and user maintenance shall not be made by children
without supervision.
This marking indicates that this product
should not be disposed with
other household wastes throughout the EU.
To prevent possoble harm to the environment or
human health from uncontrolled waste
disposal ,recycle it responsibly to promote the
sustainable reuse of material resources.To return
your used device,please use the ruturn and
collection systems or contact the retailer where
the procuct was purchased.They can take this
product for environmental safe recvcling.
Correct Disposal of this product
Installation instruction
left leg 1pc
Right leg 1pc
U tube 1pc Side frame 2pc
hexangular
base 2pcs
M10*25 4pcs
M8*12 4pcs
M8*25 8pcs
Handset 1pcs adjustable pad 4pcs
step 1,loose M8*10 screw，adjust the leg vertically.
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
step 2,loose the screw M10X25，then input “U” shape tube，adjust to the demand
length.
step 3,Install the side frame(as picture)
step 4, fasten the base on the legs with M8*25 screws(8pc)(see picture)
step 5,Adjust the hexangular beam to the required length.
step 6,Install panel and Handset(as picture)
Handset Instruction
Press M4 memoty key 5 seconds to memoty
the positon/to certain hight
Press M3 memoty key to set up a certain hight
Press M2 for 5 seconds to set up the memoty hight
Press M1 for 5 seconds to set up the memoty hight
Press the down key to down and stop pressing when reach the hight
Press the up key to rise,release the key when come to the hight you need
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Titan Fitness Single Motor Electric Adjustable Height A2 Sit-Stand Desk User manual

Titan Fitness
Brand
Titan Fitness
Model
Single Motor Electric Adjustable Height A2 Sit-Stand Desk
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents