Titan Fitness Scratch and Dent - Single Motor Electric Adjustable Height A2 Sit-Stand Desk - FINAL SALE User manual

Brand: Titan Fitness

Model: Scratch and Dent - Single Motor Electric Adjustable Height A2 Sit-Stand Desk - FINAL SALE

Type: User manual

This manual is also suitable for

Single Motor Electric Adjustable Height A2 Sit-Stand Desk

MPN:

SKU:

UPC:

Titan Distributors Inc. 1 800-605-8241

141 Eastley St. Ste. 113

Collierville, TN 38017

WA2 Electric Height

adjustable desk frame

WA2 series using instruction

A2 Standing

Desk Frame

OWNER'S MANUAL

MPN: A2FRAME

SKU: 403021

A2 series parameter instruction

Electric Control Part:

Input Voltage:100-240V can be use

Output Voltage:24V DC 2.0A

Duty cycle:10%MAX 2min on 18 min off

Switch power supply,low energy consumtion

Manual device can move and long press

Desk frame part:

built-in limit switch

Dynamic load:40KG

The maximum static load:80KG

Load speed:20mm/s

Lift range:680mm---1160mm

The length of the adjusting range:1100mm~1600mm

Other part:

Packing Size：1080*270*325mm 1Set

Gross weight:37KG

Safety and warnings

This appliance can be used by children aged from 8 years and above and persons

withreduced physical,sensory or mental capabilities or lack of experience and

knowledge if they have been fiven supervision or instruction concerning use of

the appliance in asafe way and understand the hazards involved.Children shall not play

with the appliance.Cleaning and user maintenance shall not be made by children

without supervision.

This marking indicates that this product

should not be disposed with

other household wastes throughout the EU.

To prevent possoble harm to the environment or

human health from uncontrolled waste

disposal ,recycle it responsibly to promote the

sustainable reuse of material resources.To return

your used device,please use the ruturn and

collection systems or contact the retailer where

the procuct was purchased.They can take this

product for environmental safe recvcling.

Correct Disposal of this product

Installation instruction

left leg 1pc

Right leg 1pc

U tube 1pc Side frame 2pc

hexangular

base 2pcs

M10*25 4pcs

M8*12 4pcs

M8*25 8pcs

Handset 1pcs adjustable pad 4pcs

step 1,loose M8*10 screw，adjust the leg vertically.

①

②

③

④

⑤

⑥

⑦

⑧

⑨

⑩

⑪

step 2,loose the screw M10X25，then input “U” shape tube，adjust to the demand

length.

step 3,Install the side frame(as picture)

step 4, fasten the base on the legs with M8*25 screws(8pc)(see picture)

step 5,Adjust the hexangular beam to the required length.

step 6,Install panel and Handset(as picture)

Handset Instruction

Press M4 memoty key 5 seconds to memoty

the positon/to certain hight

Press M3 memoty key to set up a certain hight

Press M2 for 5 seconds to set up the memoty hight

Press M1 for 5 seconds to set up the memoty hight

Press the down key to down and stop pressing when reach the hight

Press the up key to rise,release the key when come to the hight you need

Titan Fitness Scratch and Dent - Single Motor Electric Adjustable Height A2 Sit-Stand Desk - FINAL SALE User manual

Brand: Titan Fitness

Model: Scratch and Dent - Single Motor Electric Adjustable Height A2 Sit-Stand Desk - FINAL SALE

Titan Fitness Scratch and Dent - Single Motor Electric Adjustable Height A2 Sit-Stand Desk - FINAL SALE User manual

This manual is also suitable for

Titan Fitness Scratch and Dent - Single Motor Electric Adjustable Height A2 Sit-Stand Desk - FINAL SALE User manual

Related papers

Other documents