Husky C201H Installation guide

Type
Installation guide
START
Pull the ring on the safety
valve to release air for
about 20 seconds (if any).
Release the ring to close.
Close regulator knob by
turning in a counterclock-
wise direction until the
outlet pressure reaches zero
Attach air hose to the quick
coupler (air hose and
accessories NOT included)
Close the drain valve by
turning in a clockwise
direction.Drain tank after
every use.
Plug in the power cord.
Use of an extension cord is
not recommended with this
product. Please use a longer
hose instead.
Turn the switch to the ON (I)
position. After starting, wait
until the compressor shuts
off before using.
Adjust the pressure
regulator by turning in a
clockwise direction to the
working pressure of the tool.
Ensure the switch is in
the OFF (0) position
AIR COMPRESSOR QUICK START UP GUIDE
Model: C201H
SKU: 1001487189
111
33
3
44
4
55
5
66
6
77
7
88
8
22
2
  • Page 1 1

Husky C201H Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI