Page is loading ...
Backlit Bluetooth Keyboard
Owner’s Guide
www.Sharkk.com
2
I
Thank you for your purchase of the SHARKK
Backlit Bluetooth Keyboard. Please take the time
to read this manual carefully before you begin
using your new item.
In this age of mobile device proliferation, the wire-
less keyboard has become an almost ubiquitous
phone and tablet companion. Featuring classic alu-
minum styling and a slim lightweight design, the
3
I
SHARKK Backlit Bluetooth Keyboard was crafted
with the intent to blend convenience and utility
into the ultimate mobile accessory.
In addition to the Backlit Bluetooth Keyboard, the
SHARKK Lifestyle Brand is pleased to be able to
oer a wide range of consumer accessories across
many dierent product categories. Keyboards,
Tablet and Phone Cases, Speakers and Wallets are
Introduction
4
but a few of the items that make up our extensive
online catalog.
Here at SHARKK, the quality of our products and
the satisfaction of our customers are the two great-
est passions of our enterprise, as we endeavor to
bring you top quality items at competitive prices.
5
G S
Box Content
•1x Wireless Back-lit Bluetooth Keyboard
•1x Micro-USB charging cable
•1x User Manual
•1x Pouch
Instructions
Before you begin using your new keyboard, please
use the micro-USB charging cable (included) to
6
G S
charge the keyboard for 1 - 4 hours or until the
battery status light ( ) turns o.
Power Switch
The power switch for your device is located on the
underside of the keyboard. When powering on,
the status indicator ( ) will briefly turn blue,
indicating that your device is now active.
Stat u s
OFF / O N
7
G S
Bluetooth Connection
•While the keyboard is powered on, press the
connect button located on the underside of the
keyboard to begin bluetooth pairing with your
device.
•After pressing the connect button, the blue
keyboard status indicator light ( ) will begin
to blink, and will continue to do so until pairing
is complete.
Co n n ect
Stat u s
8
G S
•Once the status indicator light is blinking, turn
on the bluetooth setting on your mobile device
and scan for nearby bluetooth-enabled devices.
•Once the scan is complete, the keyboard will
appear on your screen as “SHARKK Keyboard”,
select this option and input the displayed code
on the keyboard then press enter to complete
the pairing.
9
G S
Charging/Battery
•The charging indicator light ( ) located on the
underside of the keyboard will turn red when
the keyboard is plugged in and charging. The
charging indicator will turn o when the key-
board is fully charged.
•When the keyboard battery is running low, the
power indicator located on the bottom of
the
10
G S
keyboard will begin to blink. When blinking,
please charge battery for no less than 2 hours.
•Use the Micro-USB cable (included) to charge
your keyboard by inserting the larger end of the
cable into the USB port of a computer or power
adapter.
•Charge for 1 - 4 hours, or until the battery status
l
ight ( ) on the bottom of the keyboard turns o.
11
G S
Sleep Mode
•To conserve energy and maximize battery life, the
keyboard will automatically enter sleep mode if
left on and unused for approx. 1 minute.
•Simply press any key on the keyboard to reawaken.
Note: The keyboard will also automatically enter sleep
mode if it is turned on and there is no attempt made to pair it
with a device.
12
G S
Backlight
•Press the backlight button ( ) to turn on.
•Press the backlight button a second time to
increase the level of backlighting.
•Press a third time to turn o.
•Press
( + ) or ( + )
to
change
backlight
colors
.
Note: Backlight is automatically disabled when battery
capacity falls below 20%.
13
P O
OS Function Keys
The keyboard contains a unique OS settings
button for each of the three operating systems it
supports.
Note: because the keyboard supports multiple operating
systems, it includes buttons that are nessecary for some but
may not be nessecary for others, such as the cmd key for IOS
and the Fn key for Windows.
14
P O
After pairing your device with the keyboard, press
the OS button that matches the operating system
of your device.
IOS ( press )
IOS is the default keyboard setting. IOS does not
currently support the “Insert” key.
Virtual Keyboard
Only available for use with IOS
Fn +
Q
Fn
+
Control
15
P O
Search
Press to activate the search function of your device.
Home
Pressing this button will take you back to the
home/main screen of your device.
Brightness -
Press to darken screen.
Brightness +
Press to increase the level of screen brightness.
esc
f1
f2
16
P O
Cut (cmd + X)
Press to cut text from screen and copy to clipboard.
Copy (cmd + C)
Press to copy selected text to clipboard.
Paste (cmd + V)
Press to paste clipboard contents.
Copy All (cmd + A)
Press to copy all text from screen to clipboard.
f3
f4
f5
f6
17
P O
Previous Track
Press to skip to the previous media track.
Play/Pause
Press to play or pause the current track.
Next Track
Press to skip to next track.
Mute
Press to mute all media.
f7
f8
f9
f10
18
P O
Volume Down
Press to lower media volume.
Volume Up
Press to raise media volume.
Lock
Press to lock the screen of your device.
Switch Language
Press to switch between languages on your device.
f11
f12
19
P O
Android ( press )
Note: Multi-media keys are intended for use with Samsung
Android Tablets and may not work with other devices. Addi-
tionally, Andorid does not support the “Insert” key.
Home
Press to go to the home/main screen of your device.
Search
Press to activate the search function of your device.
esc
Fn +
W
20
P O
Cut (control + X)
Press to cut text from screen and copy to clipboard.
Copy (control + C)
Press to copy selected text to clipboard.
Paste (control + V)
Press to paste clipboard contents.
Copy All (control + A)
Press to copy all text from screen to clipboard.
f3
f4
f5
f6
/
