KidKusion 6021 Installation guide

Type
Installation guide
Corner Cushions Model 6021
For sharp corners. Tape included. 4 Pack.
To install:
1. Thoroughly clean surface area, using rubbing alcohol on table surfaces and the inside of foam cushion.
2. Remove backing from tape and apply to inside surface of cushion. 3 pieces per corner.
3. Remove backing from applied tape and position corner. Press and rub firmly to adhere. Allow several hours for
adhesive to adhere.
4. Because all furniture finishes are different, we cannot guarantee furniture finishes, only softer corners.
This product is not a substitute for adult supervision.
Questions - Please call 1-800-845-9236 or visit www.kidkusion.com
KidKusion is a registered trademark of KidKusion Inc.
C 2011 KidKusion Inc. All Rights Reserved This product is not a toy. Do no allow
Made in the USA
Distributed by KidKusion Inc. children to play with it.
www.kidkusion.com
1-800-845-9236
  • Page 1 1

KidKusion 6021 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI