Anest Iwata LPH2003 is a spray gun designed for painting high viscosity paints such as adhesives and FRP resin. It features a maximum working pressure of 6.8 bar (98 PSI), a noise level of 76 dB(A), and a temperature range of 5~40 °C. The gun has a fluid nozzle orifice of 1.2 mm (0.047 in) and an atomizing air pressure of 2.0 bar (28 psi). It uses a G2 air cap set and has a pattern width of 400 mm (15.7 in) at a spray distance of 200-300 mm (7.9-11.8 in). The gun weighs 500 g (17.7 lbs) and uses the PC-19B fluid pressure container.