Step comm 1100 User manual

Type
User manual

This manual is also suitable for

February 2003 STEP COMMUNICATIONS Doc. 10721100-01
MOTOROLA TIMEPORT 270c BLUETOOTH™ MOBILE PHONE
PAIRING INSTRUCTIONS for STEP 1100™ Earpiece
These instructions need to be completed only once when the S
TEP 1100
Earpiece is first paired with your Bluetooth enabled
phone. After pairing, whenever the mobile phone and earpiece are both turned on they will automatically reestablish their
pairing. You simply put on the earpiece and communicate naturally. These instructions are for the Motorola Timeport
270c mobile phone.
Motorola 270c – First turn on the phone
1. Push the “Menu” button on the phone
2. Use the 4-Way Navigation Key to scroll to “Settings”
3. Select “Settings” by depressing the right Soft Key
4. Use the 4-Way Navigation Key to scroll to “Connection
5. Select “Connection” by depressing the right Soft Key
6. Select “Bluetooth Link” by depressing the right Soft Key
7. Select “Handsfree” by depressing the right Soft Key
8. Use the 4-Way Navigation Key to scroll to “Scan All”
9. Turn On the S
TEP 1100 Bluetooth Earpiece by pushing its button and holding it depressed for 4 seconds
(Until the LED is alternately flashing Red/Green. A low to high pitch tone will be heard from the
Earpiece)
10. Select “Scan All” by depressing the right Soft Key on the phone
11. The cell phone will indicate “Scanning…”
12. “Bond with BTHS?” will appear on the cell phone screen and the phone will beep. If other Bluetooth
devices are in the vicinity it will recognize them as well. The S
TEP Communications Earpiece will appear
as BTHS (Bluetooth Head Set). If necessary, scroll to and select “BTHS” utilizing the 4-Way Navigation
Key
13. Select “Yes” by depressing the left Soft Key
14. It will ask you to “Enter Bluetooth Pass Key” – enter “8888”.
15. Select “OK” by depressing the right Soft Key
16. The cell phone will indicate “Verified Bluetooth” and then “BTHS?”
17. Select “Link” by depressing the right Soft Key
18. The cell phone then indicates “Connecting…” Followed by “Connected BTHS”. A low to high pitch tone
will be heard from the Earpiece.
19. The cell phone is now paired with the S
TEP 1100 Bluetooth Earpiece and the Earpiece LED will be slowly
blinking Green. You can now press the “END” key on the cell phone keypad to go back to the cell phone’s
standby screen.
Your Bluetooth Earpiece is now ready to use with the Motorola 270c.
  • Page 1 1

Step comm 1100 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI