True Manufacturing TG2HPT-2G-2S Datasheet

Brand: True Manufacturing

Model: TG2HPT-2G-2S

Type: Datasheet

Toll Free Number • 1-800-325-6152

Specifications subject to change without notice.

FEATURES/BENEFITS

All dimensions rounded up to the nearest 1/8".

TG SERIES

TG2H-2S

TG1H-1S

• Powerfully provides holding temperatures

of 80°F to 180°F throughout the cabinet for

uniform, forced-air, heating.

• Low velocity fan(s) provided to assure even

temperature throughout cabinet. A vent is

located at the top of the cabinet for positive

humidity control.

• Heater - stainless steel for corrosion resis-

tance.

• Shelving - (3) heavy duty, chrome shelves

per section with wall mounted pilasters (3)

different interior kits available. See “spec.

series” accessory pages 70 or 134 for details

(field installation required).

• 300 series stainless steel solid doors and

rainshield (the finest stainless available).

• Anodized quality aluminum sides, bottom and

back.

• Anodized aluminum interior.

• Foamed-in-place polyurethane high density

cell insulation (CFC free).

• Exterior, color coded, temperature display.

• Lifetime guaranteed recessed handles on

solid doors.

• Extruded, aluminum door frames on glass

doors.

• Door locks standard.

• Doors equipped with lifetime guaranteed

self-closing hinges with 120 degree stay

open feature standard.

• Humidity control - 12" x 20" pan standard.

• Manual humidity control is a standard fea-

ture (turn counterclockwise to ventilate).

• Incandescent interior lighting.

• Energy efficient, triple pane, thermal insu-

lated glass on glass doors.

• 6" legs standard equipment. 4" diameter

swivel castors available for single section

models only.

• Pass-thru heated cabinet designed to

be rear-loaded from prep area and front

accessed.

• Self-contained system.

Curb mountable units for TR, TA & TG series only. (5% list upcharge)

REACH-IN HEATED CABINETS

MODEL

SWING

DOORS

CU.

T.WA TTS

CRA TE D

WEIGHT

CABINET DIMENSIONS

L D† H*

SOLID DOORS

TG1H-1S ‡ 1 s/s 31 2000 350 29 x 34

x 78

TG2H-2S ‡ 2 s/s 56 4000 565 51

/8 x 34

x 78

SOLID HALF DOORS

TG1H-2HS ‡ 2 s/s 31 2000 N/A 29 x 34

x 78

TG2H-4HS ‡ 4 s/s 56 4000 N/A 51

/8 x 34

x 78

GLASS DOORS

TG1H-1G ‡ 1 gls 31 2000 N/A 29 x 34

x 78

TG2H-2G ‡ 2 gls 56 4000 N/A 51

/8 x 34

x 78

GLASS HALF DOORS

TG1H-2HG ‡ 2 gls 31 2000 N/A 29 x 34

x 78

TG2H-4HG ‡ 4 gls 56 4000 N/A 51

/8 x 34

x 78

PASS-THRU HEATED CABINETS

MODEL

SWING

DOORS

CU.

T.WA TTS

CRA TE D

WEIGHT

CABINET DIMENSIONS

L D† H*

SOLID FRONT/SOLID REAR DOORS

TG1HPT-1S-1S ‡ 2 s/s 31 2000 400 29 x 37

x 78

TG2HPT-2S-2S ‡ 4 s/s 56 4000 600 51

/8 x 37

x 78

GLASS FRONT/SOLID REAR DOORS

TG1HPT-1G-1S ‡ 1 gls - 1 s/s 31 2000 480 29 x 37

x 78

TG2HPT-2G-2S ‡ 2 gls - 2 s/s 56 4000 N/A 51

/8 x 37

x 78

† Depth does not include 1

/8" for door handle on glass door models.

* Height does not include 6" for leg height or 5" for optional castors (castors available on single section

models only).

* Height does not include 1" for system mechanical components.

‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.

note: Two section models require hard wiring.

† Depth does not include 1

/8" for door handle on glass door models.

* Height does not include 6" for leg height or 5" for optional castors (castors available on single section

models only).

* Height does not include 1" for system mechanical components.

‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.

note: Two section models require hard wiring.

True Heated Cabinets are

designed to hold warm

baked or cooked food.

Cabinets are not designed

to heat ambient or cold

product.

True’s TG Series 1 and 2 section reach-in and pass-thru

heated cabinets can be built with any combination

of half & full doors in both stainless steel and glass.

Please contact your local True representative for

nomenclature, pricing and lead times.

True Manufacturing TG2HPT-2G-2S Datasheet

True Manufacturing TG2HPT-2G-2S Datasheet

True Manufacturing TG2HPT-2G-2S Datasheet

Related papers

Other documents