DEVI 140F1011 Installation guide

Type
Installation guide
Enjoy superior indoor comfort
with electric oor heating
Floor heating oers the triple benets of energy savings, reduced costs and im-
proved comfort. Danfoss electric oor heating is a small investment that brings
maximum output.
The electric oor heating system consists of thermostat-controlled heating
cables or mats tted below the surface of the oor. They react rapidly to changes
in the indoor climate, radiating just the right amount of warmth and minimizing
your energy consumption.
Ask your installer about:
n
Heating cable EFTPC controlled via EFET 535 – with basic controlling options
n
Heating cable EFTPC controlled via EFIT 550 – with more advanced controlling
options
n
Heating mat EFTM controlled via Danfoss Link – the most advanced combination,
in which the thinnest heating mat is connected to the entire heating system and
controlled via Danfoss Link
Electric Floor Heating
Why choose electric oor heating from Danfoss?
Achieve comfort and energy savings today
1. Instant, all-over comfort
n
Rapid and even heat distribution
n
No draft – comfortably warm at body level,
pleasantly cool at head level
2. Compact and exible
n
Make a new floor on top of the old one
n
Low built-in height – complete heating
system takes up less than 3.3 cm
3. Perfect for renovations
n
No breaking up of oors
n
Ultra-thin heat mats can be laid directly in
the tile adhesive
Contact your local installer or discover more on our website.
Danfoss Link
Controlled
VB.AM.G2.02_Sep2014
heating.danfoss.com
1 / 1

DEVI 140F1011 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document