Benchmark Scientific H3D1020 is a nutating mixer designed for gentle, thorough, no/low foam tube mixing and other nutating mixer applications. It comes with a mini-sized platform (6" x 8") that fits inside the myTemp™ mini incubator. The mixer has a fixed speed of 24rpm (20 rpm for 230 volt models) and a tilt angle of +/- 20 degrees from the horizontal. It has a load capacity of 1.6kg (3.5 lb) centered and balanced. The mixer is easy to operate. Simply load the platform from the center out, ensuring a balanced load, and turn on the unit using the ON/OFF switch.
Benchmark Scientific H3D1020 is a nutating mixer designed for gentle, thorough, no/low foam tube mixing and other nutating mixer applications. It comes with a mini-sized platform (6" x 8") that fits inside the myTemp™ mini incubator. The mixer has a fixed speed of 24rpm (20 rpm for 230 volt models) and a tilt angle of +/- 20 degrees from the horizontal. It has a load capacity of 1.6kg (3.5 lb) centered and balanced. The mixer is easy to operate. Simply load the platform from the center out, ensuring a balanced load, and turn on the unit using the ON/OFF switch.
Benchmark Scientific H3D1020 is a nutating mixer designed for gentle, thorough, no/low foam tube mixing and other nutating mixer applications. It comes with a mini-sized platform (6" x 8") that fits inside the myTemp™ mini incubator. The mixer has a fixed speed of 24rpm (20 rpm for 230 volt models) and a tilt angle of +/- 20 degrees from the horizontal. It has a load capacity of 1.6kg (3.5 lb) centered and balanced. The mixer is easy to operate. Simply load the platform from the center out, ensuring a balanced load, and turn on the unit using the ON/OFF switch.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI