DAB PUMPS reserves the right to make modi cations without notice
3
• Cost-effective construction ensures low cost, high ef ciency, better performance and reliability.
• Abrasion resistant construction, oating impellers ensure optimum resistance to abrasion.
• The delivery port and suction support are made of precision-cast stainless steel, guarantee resistance to corrosion, durability
and a sturdy coupling to the motor.
• The hexagonal pump shaft guarantees an effective impeller driving.
• A non-return valve is tted at the discharge to prevent back ow of water and alleviate water hammer to the pump, thus
safeguarding impellers and diffusers which are made from ABS material.
S4-2 SERIES
S4-2/5
S4-2/7
S4-2/10
S4-2/14
S4-2/20
S4-2/28
S4-2/40
S4-2/52
Discharge 32mm
S4-2/52
S4-2/40
S4-2/28
S4-2/20
S4-2/14
S4-2/10
S4-2/7
S4-2/5
H (M)
S4-2/2
8
S4
-
2/5
S4-2/1
4
S4-2/10
H
(M)
DAB PUMPS reserves the right to make modi cations without notice
4
• Cost-effective construction ensures low cost, high ef ciency, better performance and reliability.
• Abrasion resistant construction, oating impellers ensure optimum resistance to abrasion.
• The delivery port and suction support are made of precision-cast stainless steel, guarantee resistance to corrosion, durability
and a sturdy coupling to the motor.
• The hexagonal pump shaft guarantees an effective impeller driving.
• A non-return valve is tted at the discharge to prevent back ow of water and alleviate water hammer to the pump, thus
safeguarding impellers and diffusers which are made from ABS material.
S4-4 SERIES
H (M)
Discharge 32mm
S4-4/4
S4-4/7
S4-4/9
S4-4/14
S4-4/19
S4-4/27
S4-4/35
S4-4/48
S4-4/48
S4-4/35
S4-4/27
S4-4/19
S4-4/14
S4-4/9
S4-4/7
S4-4/4
DAB PUMPS reserves the right to make modi cations without notice
5
• Cost-effective construction ensures low cost, high ef ciency, better performance and reliability.
• Abrasion resistant construction, oating impellers ensure optimum resistance to abrasion.
• The delivery port and suction support are made of precision-cast stainless steel, guarantee resistance to corrosion, durability
and a sturdy coupling to the motor.
• The hexagonal pump shaft guarantees an effective impeller driving.
• A non-return valve is tted at the discharge to prevent back ow of water and alleviate water hammer to the pump, thus
safeguarding impellers and diffusers which are made from ABS material.
S4-6 SERIES
H (M)
Discharge 32mm
S4-6/5
S4-6/7
S4-6/10
S4-6/14
S4-6/21
S4-6/29
S4-6/38
S4-6/52
S4-6/52
S4-6/38
S4-6/29
S4-6/21
S4-6/14
S4-6/10
S4-6/7
S4-6/5
DAB PUMPS reserves the right to make modi cations without notice
6
• Cost-effective construction ensures low cost, high ef ciency, better performance and reliability.
• Abrasion resistant construction, oating impellers ensure optimum resistance to abrasion.
• The delivery port and suction support are made of precision-cast stainless steel, guarantee resistance to corrosion, durability
and a sturdy coupling to the motor.
• The hexagonal pump shaft guarantees an effective impeller driving.
• A non-return valve is tted at the discharge to prevent back ow of water and alleviate water hammer to the pump, thus
safeguarding impellers and diffusers which are made from ABS material.
S4-8 SERIES
H (M)
Discharge 50mm
S4-8/43
S4-8/32
S4-8/23
S4-8/17
S4-8/13
S4-8/8
S4-8/6
S4-8/4
S4-8/4
S4-8/6
S4-8/8
S4-8/13
S4-8/17
S4-8/23
S4-8/32
S4-8/43
DAB PUMPS reserves the right to make modi cations without notice
7
• Cost-effective construction ensures low cost, high ef ciency, better performance and reliability.
• Abrasion resistant construction, oating impellers ensure optimum resistance to abrasion.
• The delivery port and suction support are made of precision-cast stainless steel, guarantee resistance to corrosion, durability
and a sturdy coupling to the motor.
• The hexagonal pump shaft guarantees an effective impeller driving.
• A non-return valve is tted at the discharge to prevent back ow of water and alleviate water hammer to the pump, thus
safeguarding impellers and diffusers which are made from ABS material.
S4-12 SERIES
Discharge 50mm
H (M)
S4-12/36
S4-12/27
S4-12/20
S4-12/15
S4-12/11
S4-12/8
S4-12/5
S4-12/5
S4-12/8
S4-12/11
S4-12/15
S4-12/20
S4-12/27
S4-12/36
DAB PUMPS reserves the right to make modi cations without notice
8
• Cost-effective construction ensures low cost, high ef ciency, better performance and reliability.
• Abrasion resistant construction, oating impellers ensure optimum resistance to abrasion.
• The delivery port and suction support are made of precision-cast stainless steel, guarantee resistance to corrosion, durability
and a sturdy coupling to the motor.
• The hexagonal pump shaft guarantees an effective impeller driving.
• A non-return valve is tted at the discharge to prevent back ow of water and alleviate water hammer to the pump, thus
safeguarding impellers and diffusers which are made from ABS material.
S4-16 SERIES
Discharge 50mm
H (M)
S4-16/28
S4-16/20
S4-16/15
S4-16/11
S4-16/8
S4-16/5
S4-16/5
S4-16/8
S4-16/11
S4-16/15
S4-16/20
S4-16/28
-
1
-
2
-
3
-
4
-
5
-
6
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Fairbanks-nijhuis 1590 Series Close Coupled Owner's manual
-
Aurora 382B CC Vertical In-Line Close Coupled Pumps Owner's manual
-
Ingersoll-Rand CENTAC User manual
-
HP 71576286 User manual
-
KSB Multitec A SX Installation & Operating Manual
-
Pentair 1590 Split Coupled Pumps Owner's manual
-
-
-
-