R82 Bronco Assembly Instruction

Type
Assembly Instruction
Monteringsvejledning (DK)
Justering af gasfjeder
Mounting instruction (GB)
Gasspring adjustment
Montageanleitung (D)
Einstellung von Gasfedern
Monteringsanvisning (S)
Justering av gasfjÀder
Montage handleiding (NL)
Gasveer verstelling
9996097100
03.2013
Mounting instruction
Gasspring adjustment
Several of R82 products are equipped with a gasspring to angle-
or heightadjust.
After a period the gasspring might need to be adjusted.
The adjustment is only neccessery when:
- the gasspring releases itself
- the gasspring can not be released at all
If the gasspring releases itself; loosen the nut with a 17 mm wrench.
Then turn the piston rod counter clockwise to tighten. Fasten the nut
again.
If the gasspring can not be released at all; loosen the nut with a 17
mm wrench. Then turn the piston rod clockwise to loosen. Fasten the
nut again.
Do not expose the gas spring to pressure or high temperatures.
DO NOT puncture.
Do not expose the piston rod to scratches ect. It is important to
use a cloth or the like, if tools are used to adjust the gas spring.
Gasspring
Nut
Piston rod
Turn clockwise/
counter clockwise
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

R82 Bronco Assembly Instruction

Type
Assembly Instruction

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages