INSTEON Open/Close Sensor
Quick Start Guide
INSTEON Open/Close Sensor
Magnet
Set Button
(Cover Removed)
Status LED
AA Battery
(Included)
Set Button
Sensor Placement
1
Peel o the tape backing and mount the
sensor and magnet to a window or door.
2
Position the sensor so that the arrows
on the magnet and sensor enclosure
align and are no more than ½” apart.
1 2
Up to ½”
1
Follow the on-screen instructions to
add your Open/Close Sensor to the
INSTEON Hub.
Linking to the Hub
+
If not using the Hub, refer to the
instructions that came with your product.
!
2
When prompted, press and hold the
Open/Close Sensor’s set button until the
status LED begins blinking.
NEW
X
Tap the set button. The status LED
will double-blink.
Congure Alerts
To receive email and text message alerts when
motion is detected, switch on alerts from
device settings within the INSTEON app.
!
RAW-1298 Rev 03.27.14
Protected under U.S. and foreign patents (see www.insteon.com/patents)
©2014 INSTEON
MANUAL
Learn More
For the complete Owner’s Manual, video
tutorials, product support and more, visit:
insteon.com/support
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
INSTEON Open/Close Sensor User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
INSTEON 2843-222 Owner's manual
-
-
-
-
-
-
-
-
-
INSTEON 2242-522 Owner's manual
