Homax 2614 Installation guide

Type
Installation guide
Instrucciones
Instructions
BUILD A SAG-FREE GATE
FRAME IN 20 MINUTES!
• NoZ-bracingrequired.Noangledcutsneeded.
• Squarenotrequired.Gateframewillautomaticallybesquared
whenbracketsareattached.
• Accomodatesvarioushorizontalrailsizes:
•2x3s•2x4s•2x6s,etc.
• Buildcustomsizedgatesoraddtopre-fabfencepanels.
• Toolsrequired:
•Saw•ScrewDriverorScrewGun•Drill•1/8"DrillBit
A. Connect brackets to top & bottom rails:
Step 1-Put1WoodScrew(W)intoholeclosesttotheoutsideedge.
Step 2-Put1PanHeadScrew(P)intoeachlocationasmarkedin
theillustrationbelow.
B. Connect side rails:
Step 4-Connecttherightsiderailtotherighttopandbottombrack-
ets.Use2Pan Head Screws (P) for each bracket.
Step 5-Repeatonleftsiderail.
C. Connect hinges to left side rail:
Step 6-Attachthetophingetotheleftsiderailusing4 Wood
Screws (W).
Step 7-Repeatonthebottomhinge.
D. Connect Gate to Post:
Step 8-Determineifthehingeswillbeontheleftorrightsideofthe
gateopeningandwhichwaythegatewillswing.Attachthefence
boardsaccordingly.
Step 9-Attachtophingeto4x4postwith4 Wood Screws (W).
Step 10-Repeatonthebottomhinge.
Step 3-RepeatSteps1&2onthebottomrail.
NOTE: PRE-DRILL ALL SCREW HOLES WITH 1/8’’ DRILL BIT.
Step-by-Step Instructions
WoodScrews(W) PanHeadScrews(P)
W
W
W
W
P
P
P
P
P
P
PP
A
P
P
P
P
P
P
P
P
B
W
W
W
W
W
W
W
W
C
D
Where2holesarepresentinasingle
location,useonly1screwineitherhole.
APremierBrandofTheHomaxGroup,Inc.
Bellingham,WA98227|www.homaxproducts.com|(800)729-9029
MN13286.1010
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Homax 2614 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages