Kohler K-496-CP Installation guide

K-496-CP
Kohler
Brand
Kohler
Model
K-496-CP
Type
Installation guide

This manual is also suitable for

Kohler K-496-CP is a bath spout that can be installed easily with the provided instructions and necessary tools. It features a durable construction and a stylish design that will enhance the look of your bathroom. The spout can be adjusted to direct water flow and provide a comfortable and relaxing bathing experience. Made from high-quality materials, it ensures longevity and resists corrosion and tarnishing.

Kohler K-496-CP is a bath spout that can be installed easily with the provided instructions and necessary tools. It features a durable construction and a stylish design that will enhance the look of your bathroom. The spout can be adjusted to direct water flow and provide a comfortable and relaxing bathing experience. Made from high-quality materials, it ensures longevity and resists corrosion and tarnishing.

Installation Guide
Bath Spout
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page“ Français-1”
Español, página“ Español-1”
K-496
1023691-2-B
Tools and Materials
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
Observe all local plumbing and building codes.
Shut off the main water supply.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified in the Price Book.
Plumbers
Putty
Strap
Wrench
Thread
Sealant
1023691-2-B 2 Kohler Co.
1. Install the Spout
Apply thread sealant and install a 1/2″ nipple so it extends 7/16″
(1.1 cm) beyond the finished wall.
Apply a bead of plumbers putty or other sealant around the inlet
end of the spout according to the manufacturer’s instructions.
Apply thread sealant to the nipple and thread the spout onto the
nipple.
Carefully tighten with a clean strap wrench.
Remove all excess putty.
Nipple
Spout
7/16"
(1.1 cm)
Apply
plumbers
putty.
Kohler Co. 3 1023691-2-B
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
USA: 1-800-4-KOHLER
Canada: 1-800-964-5590
México: 001-877-680-1310
kohler.com
©2004 Kohler Co.
1023691-2-B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Kohler K-496-CP Installation guide

K-496-CP
Kohler
Brand
Kohler
Model
K-496-CP
Type
Installation guide
This manual is also suitable for

Kohler K-496-CP is a bath spout that can be installed easily with the provided instructions and necessary tools. It features a durable construction and a stylish design that will enhance the look of your bathroom. The spout can be adjusted to direct water flow and provide a comfortable and relaxing bathing experience. Made from high-quality materials, it ensures longevity and resists corrosion and tarnishing.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents