PULSE Showerspas 3010-TS-ORB Installation guide

297 Anna St. | Watsonville, CA 95076

Toll Free: 888.785.7320

www.PulseShowerSpas.com

TUB SPOUT WITH DIVERTER

Model # 3010-TS-CH | 3010-TS-BN | 3010-TS-ORB

Measurements shown are for reference only

PULSE18-Rev.A

2 1/2”

5 1/4”

3 3/16”

Apply

plumbers

putty.

•Apply thread sealant and install a 1/2” NPT nipple, extending 4”

(102 mm) beyond the finished wall, to the bath elbow.

•Apply thread sealant to the nipple, and install the spout to the nipple.

•Carefully tighten with a clean strap wrench.

•Remove any excess putty.

Apply

plumbers

tape.

Standard Length Spouts

Specifications

4”

(102 mm)

Nipple

This manual is also suitable for